Deburring machine

Keil Keil-Single Ø 200 x 60 mm

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: Nodeu Ibyyspfx Akmsdc 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg Njdpfxju Idkzo Akmedc dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm Ndsdpfx Akeimdlrsmjc - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Condition: repair required (used), Year of construction: 1987, EDM sinking machine, manufacturer AGIE, type: EMT 1.20, year of manufacture: 1987. Travel ranges: X 250 mm, Y 160 mm, Z 200 mm with R3 adjustable head. Further details can be found in the data sheet. Ndodjix Nqhspfx Akmjc

Condition: used, Year of construction: 1975, Technical details: grinding length: 600 mm grinding width: 300 mm workpiece height: 450 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,8 x 3,0 x 2,0 m Ndsdpfjvb Dmlex Akmec grinding spindle speed: 1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment *

Condition: good (used), Year of construction: 1999, Pneumatic press, manufacturer: SCHMIDT, type: ZHS-2/22, year of manufacture: 1999. Ndedpfsiduvcjx Akmec Two-hand operation. UVV certification valid until 2023.

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,1 t Nedozmapispfx Akmjdc dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - ----- Technical Data ----- Maximum pressure: 16 bar, Power supply: 230 Volt Nedpfx Akjwzifljmsdc

Year of construction: 1997, condition: used,

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,290 mm, overall weight: 3,200 kg, controller manufacturer: MAKINO, controller model: MGF, number of axes: 3, This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total area: width 3000 mm, y 2800 mm • Power: 12 kva, 400 v, 12 a • Table size: 500 mm x 350 mm • Tool positions: 8 • Polishing edm is possible with this machine. Extra Information Polishing EDM is possible with this machineFaulty circuit board (machine won't start up) Dimensions Machine Depth 2000 mm Ndjdpfx Aksx U U Hujmsc