CNC cylindrical grinder
KELLENBERGER KEL-VARIA RS 175 / 1000

Name: KELLENBERGER KEL-VARIA RS 175 / 1000
Brand: KELLENBERGER
Availability: InStock

Condition

Used

Location

Brügg

CNC cylindrical grinder KELLENBERGER KEL-VARIA RS 175 / 1000

Machine data

Machine type:: CNC cylindrical grinder

Manufacturer:: KELLENBERGER

Model:: KEL-VARIA RS 175 / 1000

Condition:: used

Price & Location

Seller location:: Industriestrasse 22, 2555 Brügg, Switzerland

Call

Details about the offer

Listing ID:: A22604637

Reference number:: 022575

Update:: 24.08.2026

Description

KELLENBERGER KEL-VARIA RS 175 / 1000 is a CNC cylindrical grinder engineered for high precision, delivering exceptional accuracy and industrial reliability. Key capacities: centre height 175 mm, distance between centres 1000 mm, max. grinding diameter 349 mm; right-hand wheel Ø500×80 mm bore 127 mm; Z axis 1150 mm, X axis 320 mm; workpiece weight on centres up to 150 kg. Main specs: wheel speeds 1500–1800 rpm, peripheral speed 32 m/s, automatic indexing 0.1°; rapid feed 10 m/min; work spindle stepless 5–500 rpm, taper 5 CM (rotatable -30/+120°); tailstock taper 4 CM stroke 50 mm; table speed up to 8 m/min; max table angle 9°; grinding spindle motor 7.5 kW, work spindle motor 3 kW; 50 Hz 3x380 V; air 4 bar; machine weight ≈6000 kg; footprint L3600×W2000 mm. Accessories: coolant system, MARPOSS touch probe and measuring head, Positionar Passiv, grinding wheel with flange, lamp, tailstock with fine adjustment. Achieves tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical a
Crodpfx Apjzv I I Ssteg

Documents

22604637-01.pdf
22604637-02.pdf
22604637-03.pdf
22604637-04.pdf

Seller

Registered since: 2015

72 listings online

Call

Send inquiry

Telephone & Fax

+41 32 37... show

Fax:

These listings may also fit your interest.

Listing

KELLENBERGER KEL VARIA RS 175/1000 KELLENBERGER KEL VARIA RS 175/1000

Italy

6,946 km

KELLENBERGER KEL VARIA RS 175/1000
KELLENBERGERKEL VARIA RS 175/1000

Call

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 320 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit. Cjdpfxoyi Elie Apterg Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance between centres: 1000 mm • Centre height: 175 mm • Grinding wheel dimensions right Ø 400 x 50 mm • Grinding wheel head movements -210°/+30° • Rotational speed 8-800 rpm • Spindle type cm5

See details

Listing

VTL for railway wheels RAFAMET KOB-125 RAFAMET KOB-125 KOB-125

Mierzyce

6,187 km

VTL for railway wheels RAFAMET KOB-125
RAFAMET KOB-125KOB-125

Call

Listing

Cylindrical Grinding Machine KELLENBERGER KEL-VARIA RS 175-1000

Germany

6,823 km

Cylindrical Grinding Machine
KELLENBERGERKEL-VARIA RS 175-1000

Call

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control Crsdpfx Aexyadajptjg The machine can be viewed in operation at the customer's premises from 2025 up to and including January 2026.

See details

Listing

Iserlohn

6,958 km

CNC cycle lathe
MONFORTSKNC 6

€15,500

ONO plus VAT

Call

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Crjdpfxjhktd Ns Aptsg Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

See details

Listing

CNC Lathe MAZAK - QTN 300-II Mazak QTN 300-II

Babberich

7,060 km

CNC Lathe MAZAK - QTN 300-II
MazakQTN 300-II

Call

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Csdsyyxlfspfx Aptjrg Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

București

5,507 km

Gear hobbing machine
STANKOIMPORT5M150

Call

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Cjdpjqcvkvjfx Apterg Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Weight: 10200 kg

See details

Listing

Straightening and cutting machine VITARI VR 12

Đakovo

6,121 km

Straightening and cutting machine
VITARIVR 12

Call

Listing

Germany

6,760 km

Gear Shaping Machine
LIEBHERRWSC 1200

Call

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 Cedpfxowzmpzj Aptjrg min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

See details

Listing

Horizontal internal broaching machine Arthur Klink RIW 16x1800

Hövelhof

6,884 km

Horizontal internal broaching machine
Arthur KlinkRIW 16x1800

Call

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 Csdjhpqqujpfx Aptorg -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

See details

Listing

Cylindrical Grinding Machine - Universal GIUSTINA GT 1126

Germany

6,627 km

Cylindrical Grinding Machine - Universal
GIUSTINAGT 1126

Call

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Crsdpfou Ng Dtex Apteg Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

See details

Advertise here