IMA AXIS CARD

KERN

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Kjdsyv Eq Tepfx Abcjlp Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 140 mm, spindle bore: 45 mm, center width: 500 mm, Cycle lathe Manufacturer: Kern Model: CD 282 Year of manufacture: 2006 Technical Data Make: Kern Model: CD 282 Year: 2006 Control: Heidenhain Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 140 mm Spindle bore: 45 mm Speed range: 1–5000 rpm Drive power: 11.5 kW Dimensions: L 2.20 x W 1.60 x H 1.20 m Weight: approx. 1.6 t Accessories - Heidenhain control digital display - Clean Mist extraction unit, model CM 1400/2, year 2018 - Large range of accessories as per photos - 1 piece steady rest - 1 faceplate, ø500 mm Kodpfx Absyvugdjcelp - 4 Multifix holders, size C All information is supplied without liability. A live demonstration under power is possible at any time in our exhibition hall.

Condition: not inspected (used), Year of construction: 2009, machine/vehicle number: 2805.09, Cycle Lathe DMT Kern CD 402 Condition: Not tested Delivery terms: Free loaded truck Location: 63773 Goldbach Availability: By arrangement Payment terms: Advance payment by bank transfer Internal no.: S1 Inspection under power: Can be inspected under power until 24.03. Technical Data: Control: Heidenhain MANUELplus 620 Operating hours approx.: 2265 WORKING RANGE: Swing diameter over bed: 400 mm Swing diameter over cross slide: 230 mm Cross slide travel (X): 250 mm CENTRE DISTANCE / TURNING LENGTH: Centre distance: 1000 mm MAIN SPINDLE DRIVE: Power (Digital AC motor - 40 / 60 / 100%): 16 / 15 / 12 kW Gear steps: 2 SPINDLE HEAD: Spindle nose: DIN 55026 – Size 6 Spindle bore / clearance: Ø82 mm Spindle diameter in front bearing: 110 mm Speed range: 1 – 3000 rpm CROSS SLIDE / FEEDS: Feed transverse (X): 0.001 – 1000 mm/rev Feed longitudinal (Z): 0.001 – 2000 mm/rev Rapid traverse transverse (X): 5 m/min Rapid traverse longitudinal (Z): 10 m/min Feed force transverse (X): 5000 N Feed force longitudinal (Z): 7000 N TAILSTOCK: Quill diameter: Ø60 mm Quill travel: 140 mm Quill taper: MT 4 ELECTRICS: Connection: 400 V / 50 Hz EQUIPMENT: 8-position tool turret with three tool holders and one tool mount Tailstock Three-jaw chuck Mist filtration unit SCOPE OF DELIVERY: Available documentation A Garant drawer cabinet including a large number of tool holders, tool mounts, jaws, and drills as per the pictures DIMENSIONS & WEIGHT: Setup dimensions L x W x H approx.: 2650 x 1600 x 1900 mm Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please contact us! Klsdpoyvldtjfx Abcep Additional Notes: ► On request, we can offer transport to the destination ► The offer price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale ❗ Sale of the goods is exclusively to businesses ❗

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 Klsdpfx Aer D Nmyobcjp - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. Klodpfeyr Si Tox Abcsp 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces • HSK 25 special holder Ksdpjx H A Nbofx Abcelp • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 230 mm, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, quill stroke: 120 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 3,000 rpm, Swing diameter over bed: 400 mm Swing diameter over cross slide: 230 mm Distance between centers: 1,000 mm Spindle bore: 50 mm Speed: 1–3,000 rpm Kjdpfx Aeyn Dqzobcjlp Quick-change toolpost Three-jaw chuck Tailstock Quill travel: 120 mm Various tools (without cabinet) Dimensions LxWxH: 2400 x 1450 x 1900 mm

Condition: used, Year of construction: 2002, Kern 3000 envelope inserting machine. The device is in working condition, used only occasionally at a backup facility, so it requires cleaning and maintenance. Kledpfx Absv D Eg Socjp

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t Kjdpfx Aor U Skhjbcjlp dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: excellent (used), Professional stereo microscope KERN OZT 464 from the renowned German manufacturer KERN & Sohn GmbH, designed for industrial, laboratory, electronics, and research applications. Equipped with a high-quality ODC824 digital camera (3.1 MP CMOS, USB 2.0), enabling direct image transfer to a PC – an ideal solution for documentation, inspection, and analysis. Technical specifications: • Microscope model: KERN OZT 464 • Type: stereo, binocular with trinocular camera port • Eyepiece: widefield WF 10x/20 mm • Magnification: approx. 7x – 45x (standard) • Illumination: adjustable LED, upper and lower • Power supply: 100–240 V, 50/60 Hz • Camera: KERN ODC824, 3.1 MP, 1/2” Aptina CMOS, USB 2.0 • Image capture and analysis software (Windows compatible) • Includes power and USB cables Condition: • Device in very good condition, fully functional • Clear and sharp image, smooth mechanical operation • Complete set with all cables, protective cover, and digital camera Applications: • Research and industrial laboratories Klsdpfx Ajxmlfijbcsp • Quality control and metrology • Electronics servicing and micromounting • Education, science, and microscopic documentation