Chip conveyor

KNOLL 400 K-1/100

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Iodpfx Aspiarnefusth Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: excellent (used), Year of construction: 2008, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, ZEISS ACCURA MASS 7/9/5 Year of manufacture: 2008 Refurbished: 2025 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Ijdpfxsyxdmfs Afusth MPE E = 1.6+L/333 at 18-22 °C R0 = 1.7 MPE-P = 1.7 MPE-THP = 2.5/50 sec RONt = 1.7 Machine features, equipment: C99 SR VII Controller automatic temperature compensation VAST XT GOLD sensor system probe changer magazine selectable probe accessories selectable calibration sphere HP Workstation with monitor Software: Calypso Basic, latest version Options: Calypso freely selectable Further accessories

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual processing. Iodpefiuguefx Afujth Drive power 5.5 kW Polishing discs diameter - 1000 mm

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot - polishing machine RPM500_OSZ2 Oscillation (50 mm) and delivery (100 mm) Polishing discs DM - 1000 mm Power - 4 kW Extraction support - 100 mm Itsdpfx Asd Dt D Iefujh There are two piece

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. Itodefz Dubopfx Afuoh The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 88 kW (119.65 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,700 kg, input voltage: 400 V, total width: 1,300 mm, total length: 2,000 mm, total height: 2,000 mm, warranty duration: 6 months, Watercooled chiller EF COOLING EVO 90 WKL770FC 88 kW Cooling capacity: 88 kW / 25.02 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling (Dry cooler is additionally required) Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Hydraulic module: 2 pcs. Grundfoss CM 10-5 + 1 pcs. Grundfoss CR20-2 + 1 pcs. Grundfoss CM15-1, expansion vessel, buffer tank 500 l. Dimensions: 2x1.3x2 m. Weight: 1700 kg. Working hours: 10432/10428/1333/1532 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Iedpfowlnwusx Afujth Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES. Isdpfxef Eknrs Afusth

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: 1606-I0019, Oil cooler for DMG SL-150 MC machine Itedpoiby Skjfx Afueh Weight: 68 KG Dimensions L x W x H: approx. 1040 x 320 x 400 mm Max. 5 operating hours Manufacturer according to label: Kouwakougyo Co. LTD.

Year of construction: 2008, condition: excellent (used), 1 x oil cooling unit Itedpfx Afekhim Eeueh Deryun DJ 3 RSA02-CE-400V year of manufacture: 2008 in very good condition. The oil cooler can be inspected.

Condition: as good as new (ex-display), machine/vehicle number: PM1000_ERB, The polishing machine for robot processing is sold. Itjdpfx Afjd Hh Txoush Manufacturer: SHL polishing wheels DM 1.000 mm 5,5 kW drive power