Bookbinding machine

Kolbus

Condition: used, Year of construction: 2023, functionality: fully functional, total height: 1,800 mm, input voltage: 400 V, total width: 2,830 mm, total length: 2,300 mm, overall weight: 2,500 kg, working width: 1,950 mm, operating pressure: 6 bar, Equipment: documentation/manual, Kolbus Autobox BX200 with Magazine Feeder Nwodpfxoyaa Rno Ag Nsc Boxmaker for producing customized folding cartons Magazine feeder for automatic sheet infeed Fully automatic setup via touchscreen Processes corrugated board up to a maximum of 10 mm Slotting knife width: 7 mm Remote service enabled DEMO machine – LIKE NEW!

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's. Nodpfx Aetyy Sfeg Nowc

Condition: ready for operation (used), Kolbus DA36, age 1985 Equipped with: - automatic feeding covering material - automatic feeding hard spine insert and side boards - automatic soft spine insert feeding from roll Nwodpfx Asylbgbog Njc - hot-melt glue - speed max 36 Cycles/min - size max 560x405 mm - size min 155x110 mm

Year of construction: 2004, condition: used, Case maker Kolbus DA 270 Year: 2004 Description: - Digital display - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (stiff) - Centre strip infeed (flexible) Nwsdpfx Aeyh I Smeg Njc - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Nwodpfx Aevug Dyeg Noc Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Nodpfx Agjx Ahl Do Njwc Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue Nwsdpst Rmhaefx Ag Noc - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), Offering several Ricoh SPC840 A3 colour printers with low page counts. The devices come from expired leasing contracts. Further details upon request. Nwjdpfxst Ivu Ds Ag Nec

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Nwedpex Dkk Ssfx Ag Nsc Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 1996, condition: used, Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Description: Nwsdpfx Asvw Al Eeg Njc - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2016, Perfect Binder Rigo Lamibind 340 HM, Used The Rigo Lamibind 340 HM is a compact and efficient perfect binder for small to medium print runs. This used machine offers a range of features for professional bookbinding. Nedpfxjvax Aro Ag Njwc Key Features: - Equipped with a milling cutter for precise spine processing - Active side gluing for reliable binding - Integrated cover station for easy attachment of book covers - Easy operation via touchscreen - Suitable for digital print and offset papers - Hotmelt (EVA) adhesive system - Manual cover application - Manual book removal - Performance: Suitable for small to medium print runs Technical Details: - Maximum block length: 340 mm - Maximum block thickness: 40 mm - Milling cutter: Fixed disc HM, 0.5 mm All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) Njdpfx Aewdgfzeg Nowc - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) Nwodpfx Agsv N U U Nj Nsc - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Nwjdpett Ug Isfx Ag Nsc Consisting of Gathering machine Wohlenberg Sprinter 7010 Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Condition: used, Year of construction: 2005, Perfect binding line Kolbus KM 473 Year: 2005 Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 - ATC thickness control - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element - Transfer into the binder - Pump(s): Becker Aircenter Perfect binder Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 Nwjdsyhdd Uopfx Ag Noc - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Note: Solema book block feeder shown on the photos is not included in the price!