Used Hardinge Gx 480 for sale (35)

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Iisdjxgqwdepfx Ac Aek Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: used, Year of construction: 2011, Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set. SPECIFICATION: TRAVELS: X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm TABLE: Length 1120 mm, Width 540 mm T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg SPINDLE: Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque 82.76 Nm, Drive System Direct Speed Belt Drive, Taper BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled FEEDRATES: Rapid and Jog (Max.) 36 m.min Cutting Feed Rate (Max.) 12 m.min AXIS MOTORS: Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW TOOL CHANGER: Type Carousel, Capacity 20 Max tool diameter 89 mm Tool length Max. 250 mm Iodpfxsvq Ry Ds Ac Aoik Tool weight Max. 6 kg Tool change time 6 sec GENERALS: Air Required 4 scfm, 700 psi /min Power supply 45A FLA / 400 v / 3 phase Coolant Capacity 360 L Control: Siemens 828D Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40 Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC

Condition: used, Year of construction: 2008, Used 2008 built Hardinge Bridgeport GX 600 in immaculate condition,with Heidenhain i530 control, swarf conveyor & fitted with the optional 12,000 RPM BT 40 spindle, an option very rarely fitted to this model! USB Port Please Note: Photos of the machine are taken as installed, better pictures will be taken on arrival. Control: Heidenhain i530 Spec: X600 Y540mm Z510 mm | 12000RPM | BT40 Accessories : swarf conveyor, USB Port Isdpfovq Ry Rox Ac Aeik Spindle: 20 HP (15kw) Spindle speed: 12,000 rpm (belt-driven) Rapid traverse rates: 30M/Min Tool changer: 20 Working surface: 750mm x 540mm Floor space: 2215 mm x 2490 mm Max machine height at tool changer position: 2713mm Approx machine weight: 5500kg

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand FANUC Ijdpfjx D Hgpjx Ac Ajik Model Series 21i-T This HARDINGE EMAG VL 5 was manufactured in 2001. It features a Fanuc Series 21i-T control, a chuck diameter of 260 mm, and a maximum turning diameter of 220 mm. The spindle can reach speeds up to 4,500 rpm, and it includes a 12-piece automatic tool changer. Ideal for precise vertical turning operations. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Iiedpfex I N Dhex Ac Aek Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORKARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hardinge Lathe Model TT-66 Year 2004 CNC GE Fanuc Series 18i-T Twin Spindle Twin Turret Chip Conveyor Iemca Bar Feeder Iiedpfsx Hw Urex Ac Ajk Driven Tools

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Ijdpfx Ajx I A Hpec Aeik Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: like new (used), Year of construction: 2018, operating hours: 598 h, functionality: fully functional, The HARDINGE GS42 is a CNC lathe designed for precision turning of hardened surfaces. Reason for sale: Order was lost before full production commenced. ONLY 598 operating hours Control: FANUC Oi-TF Max. turning diameter: 284 mm Max. swing diameter: 457 mm Max. spindle speed: 6,000 rpm Spindle bore: 42 mm Turret with 12 stations (VDI 30) (non-driven) PERFORMANCE PLUS package - Linear glass scales for X and Z axes - Spindle chiller - Heat exchanger for motor and spindle. High-pressure coolant system, cooling through turret (20 bar) Live high-performance tailstock VOP40P complete system (precision measuring probe) Ijdpfx Aoxx Rgiec Aoik

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Iijdpfx Ajxqp Enoc Ajk Application: The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1950 mm Measurements depth 3860 mm Measurements height 1905 mm Machine weight 5550 kg Control Unit Brand FANUC Model 21iT Main Drive Spindle speed range 50–4200 Spindle motor power 15 kW Movement Iiedpfx Ajx D I Izec Aok X-Axis Movement 189 mm Workpiece Workpiece drm over bed 520 mm Additional Equipment High-speed tailstock Parts catcher Bar feed interface This HARDINGE Quest 51 SP was manufactured in 2001. It features a swing over bed of 520 mm, a maximum turning diameter of 356 mm, and a spindle speed up to 4200 RPM. The machine includes a 12-station live tooling turret with integrated C-axis and Y-axis for multi-axis machining. Control is managed via a 21iT CNC system. Consider the opportunity to buy this HARDINGE Quest 51 SP horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Iedpfx Aex I N A Rec Aoik Weight approx.: 6,500 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC turning center Hardinge Conquest 51T, low hours, year of manufacture 2021, inspection/test run possible at any time Iijdpewtplcofx Ac Ajk

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm X-axis travel: 89 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. Iedpfx Acoxflprs Aeik No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: excellent (used), Hardinge HXL-S CNC Lathe Fagor Control Year 1998 Manuals Great Condition - Fully Working with no faults. We welcome any inspections Ijdpfexrvdgox Ac Ajik

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: Ijdpjxqprujfx Ac Ajik (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 4800 kg Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Iedpjx D I Unsfx Ac Aeik Y-Axis Movement 510 mm Z-Axis Movement 510 mm This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 1,60,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. U-axis in excellent condition. Positioning is highly precise. C-axis for contour grinding is available and fully operational. Control: Fanuc O-M The machine is in daily use and continues to be highly accurate. Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.) Iiodpfx Ajxp Hq Esc Ask

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 Iedpfx Acsvw Uqaj Aoik C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: like new (used), NVA000025738AK Spindle Cartridge 8K/12K Isdpov Avc Iofx Ac Asik 8,000rpm / 12,000rpm e.g. f. Hardinge GX600 Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 5500 mm Measurements depth 4400 mm Measurements height 2900 mm Control Unit Brand SIEMENS Model 810T Main Drive Number of axis 3 Movement Iijdpfxjx D Hk Ij Ac Aok X-Axis Movement 1250 mm This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Application Types Milling

Condition: like new (used), NVA000025706AK Spindle Cartridge (12K-RPM GREASE TYPE) 12,000rpm e.g. f. Hardinge VMC600 Iedpfx Acov Au Uce Ajik Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), 36001A7390 Spindle Cartridge NEII/15-1 SKF e.g. for Hardinge VMC760 Spare parts for sale Iiedpfx Acjv Au N Te Aok Spare part condition: - unused Bsm2Vxpxka Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), SKF B-1040613 Spindle Cartridge 12K with coolant trough spindle e.g. for Hardinge/Quaser/Bridgeport VMC 1000XP3 Spare parts for sale Spare part condition: - unused Iodpfev Ai Anex Ac Aeik Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), 7239892SE Spindle Cartridge 12K 12,000rpm Iodpfxjv Aizqo Ac Aoik e.g. f. Hardinge VMC 1000 XP 2 sets for sale Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle

Condition: like new (used), SN4R0150010 Spindle Cartridge 8K 8,000rpm e.g. for Hardinge VMC 1500 Spare parts for sale Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Isdpjv Aixvsfx Ac Aeik Delivery: - packed in wooden box - ex Works - excl. delivery cost #Work spindle #milling spindle