Heating band heating sleeve

Krauss Maffei** Ø200 x 160 mm 5500 W

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: Nedpfx Adop T Twuewscl The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm Njdpfsh Di H Dox Adwscl -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany Ncodpsh Rdwxsfx Adwjl We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 2019, condition: new, The creation of a written offer / cost proposal for a powder coating system of the company Romer. Ncedpfoc Sd D Sjx Adwsl

Year of construction: 2019, condition: new, Convection baking oven Gas oven CGN oven Powder furnace NEW SGS- 800/ O Nedpscw Tzxefx Adwecl Gema Optiflex width 2500 mm height 2500 mm depth 12500 mm directly from the manufacturer. More information under Romer-Germany

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system Nsdpfx Aeiyyf Iodwjcl TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Year of construction: 1992, condition: used, for roasting peanuts, hazelnuts, almonds, pistachios, sunflower seeds, melon seeds, pine nuts, cashews, macadamia. Nodpfx Ajpm E R Ajdwocl Stored dismantled inlusive catalyst and Afterburner Price and further information on request The machine can also be offered completely overhauled.

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, Nedof Dc D Hjpfx Adwecl 1 piece pre-assembly of the plant in the factory of the contractor,

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment Nedoiyyc Eopfx Adwscl 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Ncodpfx Adoxgh Dzswel