Used Roeders Rfm 600 for sale (11,486)

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) Laodsxcvgiopfx Apdsg For further information such as positioning accuracies, see last image!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Laodpfx Aoz Aplxspdeg Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: used, Year of construction: 2007, RÖDERS RFM 600 with RCE 1 – High-speed machining center – 42,000 RPM – only approx. 1,370 operating hours For sale is a high-quality vertical high-speed machining center, a RÖDERS RFM 600 with RCE 1, manufactured in 2007. (An RFM 600 from 2003 is also available at the same location.) The machine is ideally suited for the highly precise machining of graphite, aluminum, non-ferrous metals, as well as hardened tool steels, and is used primarily in the tool, mold, and precision machinery industries. Technical data: Year of manufacture: 2007 Travel distances X/Y/Z: 600 / 450 / 300 mm Table: 700 x 550 mm RÖDERS CNC control HSK-40 spindle Spindle speed up to 42,000 RPM 20-position tool changer Max. workpiece weight 400 kg Machine weight approx. 6.5 t Equipment: RCE 1 rotary tool changer Smoke extraction Well-maintained overall condition Laedjzk Eu Sepfx Apdeg Only approx. 1,370 operating hours Ideal for tool and mold making, electrode manufacturing, graphite machining, precision milling, and HSC/high-speed cutting. The machine can be inspected under power after prior appointment. Location: Germany Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge but does not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2007, Milling machine Röders RXP 800 DS, year of manufacture 2007 Laedpfx Apeyiln Usdog Milling machine Röders RFM 600, year of manufacture 2000

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected Lsdpfx Apex Iwg Dedoag under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2000, x-travel 760 mm y-travel 550 mm z-travel 300 mm Control RMS6V3.15 tool change unit 25-fach tool taper HSK E40 turning speeds 42.000 U/min table-size 860 x 550 mm table load 800 kg total power requirement 14 kW weight of the machine ca. 5200 kg dimensions of the machine ca. 2,5 x 2,1 x 2,55 m 3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001 Key specifications: Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.). The machine is fully operational, well-maintained, serviced and powered up (battery maintenance). • Spindle: Newly fitted in December 2022, in use until March 2023 – Lodpfezhn T Eex Apdsag Estimated running time approx. 75 hours (de-registered by the company in March 2023) • Control system: Röders, software: RMS6V3.15 (211) • Operating system: Windows NT • Complete system updates approx. 2010 and 2016 • TFT screen The machine has been used exclusively for electrodes (primarily graphite and copper) and finishing of mould inserts – no roughing! The machine is available for viewing at any time and is ready for immediate collection. Specifications for the Roeders RFM 760 high-speed cutting centre - 25-position tool changer with laser tool measurement (length and diameter) - ISO spindle mount: HSK E40 - IR 3D probe (for workpiece measurement) - Dust extraction (graphite) - Cooling unit - Spray cooling for tool / workpiece - Roeders tool shrink-fitter - Fischer MFW-1230/42 spindle (42,000 rpm), new in December 2022 - Fixed chuck, new in 2022 - Accessories: milling cutter chucks, consumables, ...

Condition: ready for operation (used), Year of construction: 2000, A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible. Ljdjwtg Hkopfx Apdoag

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Lsdpfx Apezxckmedsag Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11.176, center height: 250 mm, overall weight: 280 kg, spindle speed (max.): 3,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 250 mm Center distance: 1,600 mm Spindle speed: 400–3,000 rpm MACHINE DETAILS Lodpszzbc Hsfx Apdoag Connected load: 3 kW Voltage: 400 V Fuse rating: 16 A Dimensions & Weight Dimensions (L × W × H): 2,460 × 440 × 1,220 mm Dry weight: 280 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Ljdozx S D Aepfx Apdeag Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, overall weight: 600 kg, plate width: 60 mm, plate length: 80 mm, resolution (max.): 2,540 dpi, TECHNICAL DETAILS Exposure method: Direct laser exposure (computer-to-screen) Resolution: up to 2,540 dpi Maximum screen size: 600 × 800 mm Suitable for: common CTS emulsions Plate width: 60 mm Plate length: 80 mm MACHINE DETAILS Input voltage: 240 V Dimensions & Weight Dimensions (L x W x H): 1,670 x 820 x 930 mm Total weight: 600 kg Laodpfezy Intox Apdjg EQUIPMENT Computer Keyboard Monitor Mouse Machine software with configuration and adjustment options Accessories and maintenance tools

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Ljdpfjzzlc Rex Apdsag Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, Year of construction: 2025, functionality: fully functional, working width 600mm Laodpfx Apjwgal Hedog two 4kW motors smooth regulation of feed speed from 4 to 12 m/min brush speed 1000 rpm maximum material height 300mm feed motor power 0.55kW

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 60944, Year of construction: 2007, operating hours: 3,334 h, load capacity: 6,000 kg, lifting height: 5,100 mm, free lift: 2,634 mm, fuel type: electric, fork length: 1,390 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,100 mm Free lift: 2,640 mm Lifting capacity: 6,000 kg Fork length: 1,390 mm Fork width min.: 450 mm Fork width max.: 1,110 mm Travel direction: 2 travel directions MACHINE DETAILS Mast type: Duplex Drive type: Electric Battery voltage: 80 V Operating hours: 3,334 h Dimensions & Weight Dimensions (L x W x H): 3,230 x 1,890 x 3,800 mm Unladen weight: 7,740 kg Laedpfxozza Tde Apdsg EQUIPMENT Fork adjustment Work light Joystick Camera Half cabin User manual available CE marking

Condition: ready for operation (used), Year of construction: 2004, operating hours: 7,266 h, functionality: fully functional, machine/vehicle number: 10932-16, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 300 mm, controller model: Roeders RMS6, spindle speed (max.): 42,000 rpm, The machine spindle was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 500 mm Travel Z-axis: 300 mm Number of simultaneous axes: 5 Max. spindle speed: 42,000 rpm Number of tool pockets: 82 Tool holder: HSK E40 Rotary table diameter: 405 mm Max. workpiece weight: 300 kg Rapid traverse: 60 m/min MACHINE DETAILS CNC control: Roeders RMS6 Power connection: 50 Hz 3x 400 Volt Total power requirement: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 3,000 x 2,700 mm Machine weight: approx. 8,500 kg Ledpfx Aeyhnu Repdeag Spindle running time: 7,266 h EQUIPMENT Coolant system Water chiller Workpiece probe Laser tool control system Chip conveyor Workpiece magazine Setup stations (number): 31 Electronic handwheel Lighting

Condition: ready for operation (used), functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, table width: 600 mm, table length: 1,000 mm, ram plate length: 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 100 t Maximum stroke: 250 mm Press model: Workshop press Press design: Single-acting Ledpfx Apszza Uhjdoag Table length: 1,000 mm Table width: 600 mm Table bore diameter: 140 mm Ram length: 300 mm Ram width: 300 mm Height adjustment: 250 mm Column spacing, length: 2,000 mm MACHINE DETAILS Drive system: Conventional Transport packages: 3 pieces Transport weight: 8,000 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Laedpjxvybdofx Apdjg Table height: 405 mm Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Lasdpfx Ajzx S Egspdjg Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 12.873, throat depth: 300 mm, punching force: 100 t, overall weight: 2,250 kg, cutting width (max.): 600 mm, TECHNICAL DETAILS Punching force: 100 t Stroke: 300 mm Punching speed: 28 strokes/min Laedpfx Aozxdquopdog Shearing width: 250 mm Max. sheet thickness: 16 mm Round material cutting capacity: 50 mm Cutting width: 600 mm Max. sheet thickness: 20 mm MACHINE DETAILS Control: Conventional Drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,250 x 2,100 mm Weight: 2,250 kg Shipping packages: 1 unit

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Lasdpfx Apjy Nzuhedjg Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm Laodpjz Dvrrofx Apdsg • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 1 x 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Lajdpfozn Rcisx Apdog KEY SPECIFICATIONS: Manufacturer: CERTUSS. Model: Universal 600 TC. Date of manufacture: 2021. Steam output: 600 kg/hour. Fuel: Propane (but can be converted). High-efficiency industrial steam generator. Compact vertical design. Fast start-up from cold. Automatic PLC control system. Complete steam generator package with ancillary equipment. Suitable for continuous industrial process steam applications. Condition: Excellent - very low working hours.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 91.898, functionality: fully functional, pressing force: 100 t, stroke length: 120 mm, throat depth: 250 mm, controller model: HACO ATL 565, working width: 3,600 mm, TECHNICAL DETAILS Press force: 100 t Max. working width: 3,600 mm Frame spacing: 3,300 mm Overhang: 250 mm Max. stroke: 120 mm Back gauge depth: 600 mm Crowning system: Mechanical MACHINE DETAILS Drive system: CNC Lsdpszxdxxefx Apdjag Control system: HACO ATL 565 Number of axes: 3 (Y1 + Y2 + X) Dimensions & Weight Dimensions (L x W x H): 4,800 x 1,800 x 2,250 mm Weight: 8,200 kg Transport packages: 2 EQUIPMENT Mechanical crowning system Quick-release die holder Tool holder in European style Tools CE marking

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Ljdpfx Apszzlhajdeag Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 42,000 rpm, overall weight: 6,500 kg, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, number of axes: 3, This Röders RFM760-099 Vertical Machining Center was manufactured in the year 2000. The machine has a spindle speed of 42000 rpm. Machine Benefits Technical Machine Benefits • Tool shrink unit • Dust extraction (graphite) • Tool holders • Software: RMS6V3.15 (211) • Working Area: 760 x 550 x 300 mm • Table Size: 860 x 550 mm • Spindle: Fischer MFW-1230/42 spindle (42,000 rpm, new as of December 2022) • Spindle Taper/Mount: ISO HSK E40 • Tool Changer: 25-position tool changer • Laser Tool Measurement: Integrated for length and diameter • Workpiece Measurement: IR 3D probe • Extraction System: Dust extraction (graphite) • Cooling System: Cooling unit and spray cooling for tool/workpiece • Shrink-Fitter: Röders tool shrink-fitter Ljdpfx Apjzun I Njdeag • Chuck: Fixed chuck (new in 2022) • Included Accessories: Milling chuck, consumables, tool holders, and manual service tools • Machine Status: In working order; EROWA clamping system and HD vise have been removed and are excluded from the deal Dimensions Machine Depth 2500 mm