Injection molding machine over 5000 KN

KraussMaffei KM-650-3500 C-2

Condition: good (used), Year of construction: 1997, Krauss Maffei KM 650 - 3500 C2 injection molding machine Year of production - 1997 Fully hydraulic closing system. MC 3 control system SP 3500 plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 90 mm, with a non-return lock and an open nozzle. Closing system: Gjdpfjvlpcgox Aabjkc complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a non-return lock and an open nozzle. TECHNICAL DATA: Closing unit: - Mold closing force: kN 6500 - Mold opening force: kN 346 - Mould mounting plate movement force -- opening kN 169 -- closing kN 144 - Mounting plate dimensions (h x v): mm 1490 x 1440 - Clearance between columns (h x v): mm 1000 x 930 - Mold opening stroke: mm 1150 - Minimum mold height: mm 600 - Opening width: mm 1750 - Ejector stroke: mm 250 - Ejector force: kN 226/285 Injection unit: - Screw diameter: mm 90 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Injection capacity cm3/s 649 - Increased injection capacity - Electric-hydraulic equipment: - Nominal power of the pump motor: kW 90 - Power of installed heaters: kW 44 - Number of cylinder heating zones: 7 - Oil tank capacity: l 1240 Dimensions and weight: - Net weight with control cabinet: t 39.5 - Machine dimensions (length x width x height): m 9.36 x 2.65 x 2.44

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, KRAUSS MAFFEI INJECTION MOULDING MACHINE KM 650-3500 C2 Year of manufacture: 2004 Operating hours: 70,000 Included in the set: Wittmann W643-339 Robot X axis (servo): 1200 mm Y axis (servo): 2400 mm Z axis (servo): 6000 mm C axis (servo): ±90° A axis (servo): ±180° 4 vacuum circuits 4 gripper circuits Clamping unit: Clamping force: 6,500 kN Mould opening force: 346 kN Moving platen stroke force: - Opening: 169 kN - Closing: 144 kN Platen dimensions (H × W): 1490 × 1440 mm Tie bar clearance (H × W): 1000 × 930 mm Mould opening stroke: 1150 mm Minimum mould height: 600 mm Fully hydraulic clamping system Injection unit: Screw diameter: 100 mm Gkedpfx Aaswxb Rboboc Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight (for PS): 2,170 g Injection rate: 649 cm³/s Complete plasticising unit for thermoplastics, with non-return valve and open nozzle Control system: MC4 control system with colour monitor Integrated operator panel Built-in floppy disk drive Electrical-hydraulic equipment: Pump motor power: 90 kW Heater power: 44 kW Number of barrel heating zones: 7 Oil tank capacity: 1,240 l Dimensions and weight: Net weight with control cabinet: 33.5 t Technical condition – service and upgrades: All hydraulic hoses replaced: 12/2024 Last Krauss Maffei technical inspection: 03/2024 New screw drive (hydraulic): 01/2025 New non-return valve: 01/2025 Fully functional magnetic mould clamping system (magnetic plates) The machine is in very good technical condition, ready for operation. Should you be interested, we will be glad to provide further information, send photos, videos, or invite you for a viewing.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 100 mm, injection pressure: 1,742 bar, mold height (min.): 600 mm, opening stroke: 1,150 mm, plate width: 1,440 mm, plate height: 1,490 mm, Injection molding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Slide plate opening force: 169 kN Slide plate clamping force: 144 kN Mounting plate dimensions: 1,490 mm x 1,440 mm Clear width between columns: 1,000 mm x 930 mm Mold opening stroke: 1,150 mm Minimum mold height: 600 mm Injection Unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection throughput: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and Hydraulic Equipment Rated power of pump motor: 90 kW Installed heater output: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Gkedpfx Aajwp Si Nsboc Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection Krauss Maffei 24.03. New screw drive (hydraulic) 25.01. New non-return valve 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with color monitor and integrated control panel - Built-in floppy disk drive - Complete plasticizing system for thermoplastics with 100 mm screw diameter, check valve, and open nozzle