Injection moulding machine

KraussMaffei KM50-180CX

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Dljdstyyn Hopfx Addja

Condition: good (used), Year of construction: 1994, working width: 1,200 mm, pressing force: 25 t, working range: 1,200 mm, High Quality Used AMADA PROMECAM ITS2 25-12 1.2metre x 25ton cnc pressbrake for sale Year 1994 Specification 25 TONS X 1250 HYDRAULIC UP STROKING 3 AXIS CNC PRESS BRAKE COMPLETE WITH HURCO AUTOBEND 7 CNC CONTROL description TYPE HYDRAULIC UPSTROKING CONTROL HURCO AUTOBEND 7 BENDING PRESSURE 25 TONS BENDING LENGTH 1250 STROKE LENGTH 100 Dsdpfxerhirzo Addela TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS Y X AND R SIDE FENCING REAR INTERLOCKED

Condition: new, Year of construction: 2023, New flexo printing machine for printing 3-color corrugated paper with automatic feeding. KIKI 1200 Automatic 3 colors printing machine for corrugated board Colors: 3 colors Material: Corrugated board, Cardboard Printing width: 1200 mm Printing length: 800 mm Material thickness: 1.5mm-7mm Speed: Max. 60 pcs/min Feeding: Automatic Ink system: 3 pcs, Pneumatic pumps Production year: 2023  With motorized longitudinal register  Anilox cylinders, 3 pcs  Cliché holder cylinders, 3 pcs  Cliché holder hoist lifting Dlodpfxsrg D Hpj Addja NEW machine never used, we bought it as a demo machine from China and we made modifications on it for professional use.

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, load hours: 60,790 h, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm Dlsdpfjh Tk Rvsx Addoa INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: used, Year of construction: 2005, Technical details: Dsdpfx Adjtunccedela screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production *

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Dledpfx Asp T Twuoddea Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Projection 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Dodpfx Aogiud Hoddsla Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2007, container length: 40 ft, color: light grey, overall weight: 30,480 kg, empty load weight: 3,745 kg, loading space volume: 67.7 m³, loading space width: 2,352 mm, loading space length: 12,032 mm, loading space height: 2,390 mm, Dear Sir or Madam Thank you for your interest in containers from MT CONTAINER GmbH in Hamburg. Sea containers are wind and watertight large-capacity containers for the transportation of goods by sea, land or air freight. The ISO-standardized containers can be loaded, unloaded and stacked particularly quickly and easily. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm. _____ This container is a: 40 foot HC container _____ Our containers have the following features: ✅ tested ✅ Valid CSC sticker (TÜV for the box) ✅ Painted in light grey (desired color possible) ✅ Wind and waterproof ✅ Odorless _____ Our containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2352 mm x H 2698 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 76.4 m³ Euro pallets ■ 25 Further information: Unladen weight ■ 3880 kg Payload ■ 28620 kg Total weight ■ 32500 kg Transport goods: Dry cargo transport _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ Drive-on ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Dlsdpfx Ajh Hm U Hjddea Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send us a non-binding message by [email], [telephone], [fax], [letter] to the contact details given under "Legal information" or [via the "Send message" function], stating your [email address], [fax number] or [postal address]. We will then submit a binding offer to you and send you our General Terms and Conditions with customer information as well as a copy of the contract.

Year of construction: 2006, condition: good (used), Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Djdpfxjhgkdqo Addsla Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons.

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molds for capsules, manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, manufacturer: ARBURG, model: 720A3200-800, year: 2017 Item 03) Extraction system for 16-cavity capsule, manufacturer: Beck, year: 2019 Item 03) Extraction system IML system for 32-cavity capsule, manufacturer: Beck, year: 2019 Dlodsw Nriujpfx Addja