Injection Molding Machine with Robot

KraussMaffei KM575-2700C2

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 22,00,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm Blsdpfsw U N Ixex Af Aen - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Bljdpfoikfmhjx Af Aon

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Blsdeygikwjpfx Af Ajn Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Krauss Maffei 650 GX SP 3000 Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Type: Horizontal Drive: Hydraulic Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Type: Horizontal Drive: Hydraulic Injection Moulding Machine – KM 650 GX Injection Unit: SP 3000 Blodpfxoy Eyxdj Af Ajn Screw Diameter: 80 mm Clamping Unit Clamping Force: 6500 kN Tool Holding Force: 455 kN Platen Dimensions (H × V): 1540 × 1440 mm Space Between Tie Bars (H × V): 1110 × 960 mm Max. Mold Height: 1450 mm Mold Installation Height (Min./Max.): 450 / 1000 mm Opening Stroke: 1000 mm Ejector Stroke: 250 mm Ejector Force (Forward/Return): 95 / 49 kN Injection Unit Screw Diameter: 80 mm L/D Ratio: 21.3 Injection Pressure: 1538 bar Shot Volume: 1284 cm³ Shot Weight (PS): 1170 g Injection Rate: 141 cm³/s Injection Speed: 133 mm/s Injection Power: 60 kW Plasticizing Rate (PS): 139 g/s Heating Power Installed: 36 kW Nozzle Retraction Force: 7 kN Drive and Energy Installed Pump Power: 90 kW Dry Cycle Time (EUROMAP 6): 3.0777 s Dry Cycle Time (KM Norm): 2.5555 s Machine Dimensions and Weight Dimensions (L × W × H): 8.03 × 2.88 × 2.45 m Net Weight: 12000 kg Max. Tool Weight: 11000 kg Oil Tank Capacity: 1180 l

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). Bsdpfx Asyf Ha Hsf Aeln #Tags: ARBURG | Multi 3K | 630S

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller Blodpfx Afjx Hzzcj Asn - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: used, Year of construction: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Blodew Hwthopfx Af Aen

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) Bljdeyzylvopfx Af Ajn \+ 2x Magnetic platten

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption Bledpfx Afey Apdqo Asn \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar Bledpfxjydnigs Af Asn • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A