Honing machine

LAM PLAN M.M. 992

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg Godpfx Ahsv Az Uce Hstt number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. Gtjdpfx Aevtancsh Het VAT is not needed if the sales happen outside of Turkey.

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric Gsdpfxjuhabto Ah Hott vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) Gtodpfx Aewnd Dpjh Hot 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Gedpeb Ez R Uofx Ah Hjtt Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Speed of the working disc 45/70/90/140 rpm Gsdpfeh Invrex Ah Hstt Main drive performance 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with control panel Full-fledged lapping machine, conventional control

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14891, Year 2012 with Fanuc 18i-TB Fully inspected by Citizen and ready for production Country of manufacture: JP Voltage: 200V/50-60Hz/3ph. Dimensions: 1400x900x1300 mm Gtodpjw T S Ilofx Ah Hst Net machine weight: 950 kg TECHNICAL SPECIFICATIONS Controller: Fanuc Series 18i-TB 6 axes: (X1/Y1/Z1/X2/Y2/Z3) Maximum bar diameter: Ø 4 mm Maximum turning length: 40 mm Main spindle, max. speed: 16,000 rpm (12,000 rpm) Indexing: 1° Maximum speed of driven tools: 8,000 rpm Sub-spindle, max. speed: 10,000 rpm, 1° indexing Tool posts: total of 8 tools Guide bushing unit: standard Technical data provided subject to errors and omissions.

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Fanuc i Series control Max Turning diameter 26mm Gtjdpfxowxl Rle Ah Hot 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Gedpjvzg Skjfx Ah Hett Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: excellent (used), Year of construction: 2001, operating hours: 8,155 h, functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, table width: 850 mm, table length: 2,000 mm, overall weight: 13,500 kg, power: 30 kW (40.79 HP), CME FS-2 bed milling machine with only 8155 hours control Heidenhain 426B Gtodpfxjquqq Ao Ah Hst incl measuring probe and complete set of manuals