Used Lam Plan Honing Machine for sale (67,254)

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] Giedpfx Aoug U Dmolbsu - Remaining work thickness : approx. 5 [mm] EQUIPMENT - Same as on photos

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] Giedpfsug U Dgsx Albsu EQUIPMENT - same as on photos

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Godpfekvnc Ssx Alboiu Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), PORTAL PLANNING MACHINE TOS Gedofmn Txepfx Albsiu LENGTH 3000mm

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm Gijdow Rv Taopfx Albsu total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm Gisdpfx Aou Ngybslbju table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, functionality: fully functional, HONING MACHINE Make: SUNNEN Type: MBB-1680FMS/GMS Minimum diameter: 1.5 mm Maximum diameter: 165 mm Supply voltage: 220/380 V Frequency: 50 Hz Phases: 3 phases Control voltage: 110 V Rated current: 5.2/3.0 A Gisdpfx Aozb Dy Njlbsu Maximum motor current: 2.6/1.5 A Electrical diagram: WD 1023 Dimensions (mm): 1250x750x1400 Weight (kg), approx.: 350-400

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Giodpfx Alezcv Uuobou Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: used, functionality: fully functional, input voltage: 400 V, Precision Cross-Honing Machine Gijdpfx Alsyx Dv Hjbeu Sunnen Eclipse EC-3500 CGM-27 used Bore diameter – honing range: 1.5 – 165 mm Stroke length – honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Strokes: 60–500 strokes Total power requirement – spindle drive: 4.1 kW Reciprocation motor: 1.1 kW Machine weight approx. 1,200 kg SICK safety light curtain Horizontal cross-honing machine / honing machine type EC 3500 and operating manual Inspection under power possible by prior appointment. Price on request All technical data subject to misprints/errors Sale exclusively to EU countries.

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 5,000 kg, spindle speed (max.): 2,987 rpm, total width: 3,000 mm, total length: 36,000 mm, space requirement height: 2,500 mm, space requirement length: 37,000 mm, space requirement width: 3,000 mm, We are offering this used Sunnen HTC 16000 honing machine, year of manufacture 1999. It can also be adapted for 6m lengths... Manufacturer: Sunnen HTC 16000 Model: HTC 16000 Year of manufacture: 1999 Condition: used Category ID: 222 Type ID: 2524 Machine type: honing machine • Max. stroke: 12,000 mm • Current working length for tubes: 17,200 mm (divisible into 6 m sections) • Spindle speed (idle): 2,987 rpm • Rated power: 5,500 Watts • Internal diameter range: Ø23.2 mm to Ø205.00 mm • Clamping fixture: prism/chain • Max. workpiece weight (internally used): approx. 5 tons Giedoyx Hazopfx Albou If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 208, workpiece weight (max.): 17 kg, type of input current: AC, spindle speed (min.): 150 rpm, spindle speed (max.): 2,500 rpm, total height: 1,550 mm, total width: 800 mm, total length: 1,450 mm, hone diameter: 50 mm, overall weight: 500 kg, Equipment: rotational speed infinitely variable, For sale is a high-quality Pemamo MDR 140 NC honing machine (year of manufacture 2004) in good and operational condition. The machine is ideally suited for precise internal machining in the micrometer range and has been used reliably. Gsdpfx Aezb Enzslboiu Highlights: • Swiss precision machine (Pemamo) • Very high accuracy • Ready for operation – demonstration possible • Robust and durable design The machine is immediately ready for use and can be inspected while powered on after prior arrangement. Sold without warranty, ex works. The machine will be delivered without power and compressed air supply. Payment before collection.

Condition: used, Sunnen brand honing machine, model MBB 1400 EMS. Godeza Hd Iopfx Albsiu

Condition: used, functionality: fully functional, Vertical Honing Machine WMW VEB SZS 200x1000 C – in good working condition, under power Gjdpfx Aljyy N Drsbsiu For sale: vertical honing machine from the well-known German manufacturer VEB Werkzeugmaschinenkombinat, model SZS 200x1000 C. The machine is in good technical condition, hower not under power currently. Suitable for precise machining of cylindrical bores. Condition and availability Condition: used, NOT under power Availability: immediately available Technical specifications Max honing length: 1000 mm Max honing diameter: 200 mm Additional information Assistance with transport can be arranged

Condition: used, Year of construction: 2023, machine/vehicle number: 855-23-01, spindle speed (min.): 10 rpm, spindle speed (max.): 250 rpm, total height: 1,600 mm, total width: 2,500 mm, total length: 11,000 mm, overall weight: 4,000 kg, rotational speed (min.): 416 rpm, rotational speed (max.): 250 rpm, Machine Data Installation dimensions: approx. 10000 × 2500 × 1600 mm Weight: approx. 3000 kg Capacity Max. outside diameter: 650 mm Max. stroke/travel: 4500 mm Max. honing length: 4000 mm Performance Data Speed: 10–250 rpm Drive power (rotary): 4 kW Stroke speed: 1–25 m/min Drive power (stroke): 3 kW Pneumatic Data Air pressure (min.): 5 bar Air pressure (max.): 9 bar System: pneumatic feed unit (automatic friction control) Control / Technology HMI: SIMATIC HMI Technical Data Voltage: 400 VAC Gedpfxjy H I Ipe Albeiu Control voltage: 24 VDC Frequency: 50 Hz Connected load: 63 A Conformity: CE Cooling System Tank capacity: 1000 l with filtration system Weights Net weight: approx. 3500 kg Gross weight: approx. 4000 kg Transport Dimensions Dimensions: approx. 11000 × 1000 × 2100 mm

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm 2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring made for honing liners with max diameter 120mm Gedpfx Alsy Umatebeiu Machine is like new because it worked only few months.

Condition: used, Technical details: honing diameter: 4-31 mm stroke: 350 mm Godpfx Aewx Shkolbjiu throat: 250 mm

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Giedpfx Alsud Nm Rsbeu Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Gedpow U Uh Defx Alboiu Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: excellent (used), functionality: fully functional, two milling units two motors with a power of 1.5 kW pneumatic shooting device sanding unit pneumatically actuated pressure shoe maximum belt width: 80 mm motor power: 1.5 kW pneumatic oscillation adjustment of units in two axes Gisdjyhn Rfspfx Albou stepless feed speed adjustment power supply: 380 V

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm Gedexxkt Aepfx Albsiu • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm Gijdpfox Szm Asx Albeu travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2D1-1116, total height: 1,905 mm, total width: 1,626 mm, total length: 1,219 mm, overall weight: 725 kg, For sale: as new, barely used, highly precise (±0.001 mm) automatic hole honing machine, sold together with numerous precision instruments, measuring devices, and extensive accessories for honing bores from D6 to D25 mm. The machine is connected to the power supply and ready for immediate operation. Godpfx Aloy E N R Njbeiu

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Giedpfx Aswrh H Njlbju Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Gsdpfx Asxwdxijlboiu Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Giedpfx Aey D A Nijlbeu