Forklift

Linde H45D-04-600

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Credpfxsqt Dmyo Abxjf Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 Cjdpfx Ascdrmmebxerf - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: new, functionality: fully functional, empty load weight: 2,850 kg, color: black, Year of construction: 2024, Equipment: sideshift, MOBILE LOADING RAMP EP 100 - Overall size: 11150x2100x1100 mm - Platform size incline length: 7000 mm - Platform length: 3000 mm - Back plate length: 750 mm - Lip length: 400 mm (steel thickness 14 mm) - Load capacity: 10,000 kg - Weight: 2850 kg - Power distribution Manual hydraulic pump and bracket - Adjustment range: 1100-1800 mm - Main beam rectangular tube: 160*80*4 mm - Hydraulic cylinder: Φ80*Φ50 (2 pieces) - Hydraulic oil line: 32 MPa - Solid rubber tires: 600-9 - Non-slip ramp approach surface: YES - Possibility to transport/maneuver the ramp with a forklift: YES PRICE: 8,823.5 € net 10,500 € gross - FREE 12-month WARRANTY - after this period we offer all original parts if required! - FREE delivery within a radius of 200 km - Sales WITHOUT TAX possible (only with VAT number)- FINANCING possible - We are always at your disposal! Cedpfxev Eai Dj Abxsrf KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you inspect and try out all the machines on site. We are the largest importer of construction and agricultural machinery in Europe and the head office of Kingway in Germany. We have a huge selection of machines in stock, with around 70 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy and other neighboring countries and we also offer our customers access to all spare parts. Reserve an appointment and come for a test drive!

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv Crjdpfx Abjd Nw Ttsxjf

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, Crjdpfjxwp Ehsx Abxof MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Codpfx Abjk Dz N Isxerf

Condition: used, Year of construction: 2006, First registration: 11.04.2006 Crsdpoyv S Ulsfx Abxef Fendt 307 CI Year of manufacture: 2006 Operating hours: 3,445 Engine: Deutz 4-cylinder turbocharger Displacement: 4,038 cm³ Rated power: 80 HP Max. torque: 423 Nm at 1500 rpm Tank capacity: 108 l Transmission: 40 km/h, 21/21 overdrive, shuttle transmission PTO: Powershiftable 540 / 750 / 1000 Hydraulics: tandem pump 70 l/min at 200 bar Rear lift capacity: 48.9 kN 2 double-acting spool valves, cross control lever Brakes: hydraulic brakes Cabin: air-suspended driver's seat, roof hatch, height and tilt-adjustable steering column, heater (no air conditioning) Front loader with parallel guidance, without third control circuit Sale subject to margin taxation in accordance with § 25a UStG Location: not specified

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg Crjdpfxsd Enr Io Abxsf

Year of construction: 2022, condition: like new (used), A high-performance checkweigher and metal detector in one compact system, perfect for fast and reliable inspection of all food products and bag types. Built for accuracy, efficiency, and maximum product safety, this 2022 model is directly available / in stock. Crodpfxox Ain To Abxof This machine is offered by DL Packaging. Key Features: • Brand: Yamato • Model: CSI22LMW-3FOC • Function: Integrated checkweigher + metal detector • Dosing range: 20 g – 2200 g • Applications: Suitable for all food products and pouches • Availability: Direct available A compact, reliable, and ready-to-use inspection solution for any food production line. About DL Packaging: DL Packaging specializes in modernized and sustainable packaging solutions for the food and non-food industry. Since 1995, we have delivered and installed packaging machines and complete packaging lines worldwide. Our “Second Life Packaging Solutions” include fully refurbished and modernized machines rebuilt to near-new condition, combined with reliable service, technical expertise, and customized solutions. In addition to packaging machines, DL Packaging supplies complete packaging lines including multihead weighers, conveyors, printers, labeling systems, checkweighers, metal detectors, and palletizers.

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m Cjdpfx Aeu Nwl Usbxsrf - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) *