TRUMPF TrumaBend V170

TRUMPF TrumaBend V170

Condition: good (used), Year of construction: 2003, functionality: fully functional, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Serial number: E10156 / B0105A0067 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat depth (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Prsdpsz Hk Iaefx Alwsb Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil capacity: approx. 95 l Diameter of hydraulic cylinder: 190 mm Dimensions and weight of the machine: Total weight: approx. 18,000 kg External dimensions of the machine (W x D x H): approx. 5,000 × 2,210 × 3,100 mm. The machine is offered without tooling.

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable Psdei Eg Nkopfx Alworb -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic Podpfxjxcp Rbj Alworb - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: Prjdpeu T Nknjfx Alweb - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm Podjip Nikspfx Alworb - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Condition: excellent (used), functionality: fully functional, controller manufacturer: Delem, bending force (max.): 170 t, control type: CNC control, number of axes: 4, type of crowning: CNC-controlled, Equipment: CE marking, foot remote control, lower tooling, safety light barrier, upper tooling, Used Trumpf Trumabend V170 CNC Hydraulic Press Brake For Sale Subcategory: Press Brakes Tonnage: 170Ton Manufacturer: Trumpf Model: V170 Trumabend Condition: Used Trumabend DA65 2D CNC Controls Predpfx Alsx R Ul Aowob 4 Axis machine, complete with i axis 2 Axis CNC Back Gauges R and X Axis complete with 4 fingers on the back stop CNC Ram Control Y1, Y2 CNC Bed Crowning Die Shift (iaxis) Pedestal Controls Electric Foot Switch Safety Light Guards

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 38,990 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V170 Year: 2001 Technical Details Manufacturer: TRUMPF Model: TrumaBend V170 Year of manufacture: 2001 Operating hours: 38,990 h Pressing force: 170 t Bending length: 4080 mm Stroke: 365 mm Frame gap: 3680 mm Table width: 200 mm Throat depth: 410 mm Rapid traverse: 200 mm/s Working speed: 1 – 11 mm/s Pjdpsyvqiusfx Alwjrb Return speed: 135 mm/s Connected load: 21.4 kVA Oil capacity: 350 l Dimensions (approx.): L 4.70 x W 2.40 x H 2.98 m Weight: 18 t Features • DA 2D graphic control • Hydraulic upper and lower tool clamping • Hydraulic WILA tool system • CNC-controlled crowning • Controlled axes: X, R, Y1, Y2 • 4 movable backgauge fingers, pneumatically clamped • Upper tool: 60°/R4, H 195mm, L = 3,850mm, segmented • Lower tool: V16/30°, R 1.6, H 100mm, L = 3,550mm, segmented • Lower tool: V40/80°, R 5, H 100mm, L = 3,100mm, segmented All information without guarantee. A powered demonstration is possible at any time in our showroom.

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min Prsdpfx Ajz N Amelwob cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY Psdeu Dw I Eopfx Alwjrb - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Pedpfoht Rl Eex Alwsrb Clamping range: 5-80 mm diameter Length: 100-1200 mm