Insulating glass making machine

LISEC VL 1 N 20 L-R

Condition: used, Year of construction: 2009, functionality: fully functional, A Scholz glass autoclave with dimensions of 9000 mm length x 3000 mm diameter is an industrial hot-air autoclave designed for the production of high-quality laminated safety glass and is typically a used unit from a specific year of manufacture. General Description and Features: This large-capacity industrial autoclave is primarily utilized in the architectural glass sector for the lamination process, in which layers of glass are bonded with interlayer polymer film materials (such as PVB or SentryGlas) under precisely controlled high temperature and pressure conditions. Key features and general specifications: - Dimensions: The inner chamber measures approximately 9000 mm in length (9 meters) and 3000 mm in diameter (3 meters). Hjdpfxowintks Ag Nsi - Heating System: Equipped with an electric heating system that ensures consistent temperature distribution throughout the process. - Control System: Features a control panel, typically a touchscreen operator interface, along with digital temperature and pressure controllers (Honeywell), allowing accurate process monitoring and control. - Door Mechanism: Incorporates a rapid-opening closure system designed for industrial efficiency and workplace safety. - Construction: Fabricated from premium-grade materials, most likely carbon steel for the pressure vessel, with internal components engineered to withstand the demands of glass lamination operations. - Applications: Designed primarily for laminated glass, Scholz autoclaves can also be configured for other thermal processing tasks and composite material production—such as fiber-reinforced plastics—depending on customer requirements. Technical Data: Exact operating parameters (pressure and temperature ranges) for units of these dimensions may vary, as Maschinenbau Scholz manufactures each autoclave to suit individual client demands. - Operating Pressure: While typical Scholz industrial autoclaves are rated up to 210 bar, applications in glass lamination generally require pressures between 0.1 MPa and 1.6 MPa (approximately 1 to 16 bar). - Operating Temperature: The glass lamination process typically operates from ambient temperature up to about 150°C, although Scholz autoclaves are capable of handling temperatures up to 650°C for various processes. - Electrical Specifications (example for a used model): - Rated current: 1100A - Service voltage: 400V - Control voltage: 24V, 230V / 50Hz These specifications and details refer to Scholz hot-air autoclaves for glass production, covering dimensions, heating systems, and control technology.

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused Hjdsxnvq Ejpfx Ag Nji • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Thickness: 3-22 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks Hsdpfxewd N Urs Ag Noi incl. vacuum system for drying zone LED lights on the outled for inspection

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Hjdpfx Agsrif U Eo Nji Total length: approx. 11500 mm, depth: 1600 mm.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 2002, fully overhauled (technically and optically), for profile widths 6-24 mm, 2 butyl storage cylinder for x 7,5 kg butyl. Hjdpfx Ageydc Nns Noi The machine will be available by the late in February / early in March 2026. Please note: the photos show the same type extruder after our last overhaul.

Condition: good (used), Year of construction: 2003, Washing height 1250 / Open top, 4 brushes / water tank, pumps, 7.5kW / blower cabinet for drying zone, Running direction: right to left, Total length: 6450 mm, Height: 2100 mm, Depth of washing machine: 1300 mm, Width: 1700 mm, Dimensions for blower cabinet: Height: 1100 mm, Length: 700 mm, Width: 700 mm Hodpfx Agst Ah Nps Nei

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport Hsdstwphwjpfx Ag Nei - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Hsdpfxjr Ak Exs Ag Nei Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! 8 brushes, Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Glass thickness: 4-15 mm, Width: 2900 mm, depth: 1100 mm, Hjdoqc Udispfx Ag Nsi height: 3400 mm.

Condition: used, Year of construction: 2004, functionality: fully functional, Lisec / ATL-60/30BF + ESL-60/30RS-S + VB45 + BTH-60/30 R-L Combi - float and laminated glass cutting Float and lami cutting line Hodpswii A Tefx Ag Noi R-L Loader ATL-60/30 Float cutting ESL-60/30RS-S Lami cutting VB45 Breakout BTH-60/30