Used Rehm Invertig 230 Gw for sale (38)

Condition: good (used), 1 used TIG welding machine Make: Rehm Model: Invertig 260 ACDC Nedpjxnql Refx Aa Ijdc 260 AMP 400 Volt ACDC 2/4 stroke High-frequency start Bi Level Current reduction Suitable for welding steel, stainless steel, and aluminum Includes TIG torch, ground cable, gas hose, and foot pedal

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Nedpfsxddamex Aa Isdc

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (max.): 260 A, For sale: Rehm Invertig 260 ACDC 260 AMP 400 Volt ACDC 2/4 Step High frequency start Bi Level Down slope Post gas Balance adjustable Steel, Stainless Steel, and Aluminum weldable Refurbished and tested Including TIG torch, earth work lead, gas cable, and 3 months warranty. Ndedpfx Asw I Rm Aea Ioc Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, machine/vehicle number: 127814, protection type (IP code): IP23, Equipment: type plate available, The machine on offer is a used Rehm Invertig 260 AC/DC. The machine is in perfect technical condition and is fully functional. Unfortunately, there are signs of wear and tear visually. All switches and the digital display work and the machine welds perfectly. The Invertig 260 AC/DC is in our warehouse ready for welding. Test welding is possible at any time, but it is best to arrange an appointment with us beforehand. With the Invertig 260 AC/DC you can weld TIG and electrodes. The machine combines professional welding with the simplest operation. The welding parameters can be individually set using the digital display. 3 languages (German, English and French) are already stored on the machine. The Invertig 260 AC/DC from Rehm offers a welding current range of 5-260 A with a high duty cycle. The individual welding current ranges and duty cycles for TIG or electrode welding can be found on the type plate. Optimal seam formation thanks to selectable current rise time/current fall time, gas pre-flow and gas post-flow time and starting current/end crater current. Narrower seam surface thanks to direct current pulses up to 500 Hz. Automatic saving of the last device setting via the digital display Nodpfxev H Afwo Aa Iedc The scope of delivery includes a used water-cooled 8m TIG torch TIGZONE CS310A.

Condition: new, functionality: fully functional, As a machine dealer in Offenburg, we offer premium welding machines from Rehm. Many machines are immediately available from stock. We are also happy to advise you with regard to individual wishes and requirements. Give us a call. Technical data Nsdpjw Eil Tofx Aa Iodc Model: 280 AC/DC Setting range TIG [A]: 3-280 Electrode (BOOSTER) [A]: 3-280 Duty cycle (ED) at Imax. (10 min.) TIG [%]: 100 Electrode (booster) [%]: 60 Welding current at 100 % duty cycle at 40°C TIG [A]: 280 Electrode (booster) [A]: 260 Fuse protection (slow) [A]: 16 Torch cooling: Water Protection class: IP 23 Power factor [cos phi]: 0.96 Power consumption at Imax. [kVA]: 11.9 Mains voltage [V]: 3 x 400 Mains frequency [HZ]: 50 Control socket [pol.]: 12 Welding cable socket [mm]: 13 Weight [kg]: 27 Dimension [mm]: 520 x 360 x 460 Possible accessories: Hand burner earth cable Pressure reducer Available immediately. For collection by the customer. Forklift available. Shipping is also possible.

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Ndjdpfx Asu Rwauoa Ioc Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: excellent (used), Manufacturer: REHM Ndsdpfev Nrfxsx Aa Iec Type: Synergic. PRO 2 450-4 Machine condition: very good used ///// Price given for 1 pc ///// Welding current setting range 45A/16V - 450A/36.5V Weight ca.130kg SMC technology - Smart Machine Control A unique regulation concept for step-adjustable devices developed by Rehm: The welding arc length is regulated not only by measuring the welding voltage and current intensity but also by digitally determining the wire feed speed. This allows for achieving excellent welding effects and makes operation easy and safe. - SDI - Stepless Dynamic Induction The smoothly adjustable coil automatically takes care of the exceptional arc ignition properties and its high stability during welding. Adjustment can be done manually using the SDI knob. This allows for the regulation of the heat input, which can have a positive effect on the amount of necessary post-welding processing. - RSC – Realtime Speed Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. By using RSC, changes in the arc length are compensated faster and more effectively. - CCM – Characteristic Curie Memory A database of welding parameters integrated in the device with expert knowledge. By selecting a set of wire type and diameter and welding current voltage level, the previously set welding parameters are synergistically selected. During welding, the current parameter values are compared with the set parameters and, if necessary, immediately corrected. - RMI – Rehm Machine Interface The control panel of the device is extremely simple and guarantees the avoidance of erroneous selection. Simple selection of parameters facilitates the welder's work and allows for minimizing errors and minimizing the time of setting the device.

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm sofort einsatzbereit 239836 +++++ Please note: Njdoibd Uaspfx Aa Isdc The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 45 A, welding current (max.): 450 A, For sale: Rehm Synergic Pro² 450-4 45-450 AMP 400 Volt 2/4 Strep 4 Roller drive 30 Steps adjustable Spot welding Interval welding Fixed programs Steel and Stainless Steel weldable Refurbished and tested Including a PRO5000 welding torch, earth work lead, gas cable, 10 meter interconnection hose, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Ndjdpfoxqmuyex Aa Ijc We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), 1 used shielding gas welding machine Brand: Rehm Model: Mega Arc 300-4 Technical data Continuously adjustable current range [A]: 25-300 Duty cycle at 25°C (40°C) and Imax ambient temperature [%]: 50 % Welding current at 100% duty cycle (40°C) [A]: 220 Open circuit voltage [V]: 68 V Power supply [V]: 3 x 400 Continuous output at 100% duty cycle [kVA]: 7.9 kVA Fuse (slow-blow) [A]: 16 A Power factor [cos phi]: 0.98 Insulation class: H Cooling type: AF Ndodpfxjxnqkas Aa Ioc Torch cooling: Gas Protection class: IP 23 Weight [kg]: 122 kg Dimensions LxWxH [mm]: 1030 x 605 x 845 Wire feed rollers: 1.0 mm

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Center support can only be adjusted manually. Machine location is EU. Ask for additional information! Ndjdoxlqnyjpfx Aa Ioc

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is our Rehm RDS 6000 drying oven. The oven is in very good condition and fully functional. The system features 22 IR heating zones and 2 convection zones. The heating zone length is 6000 mm. The current location is Satu Mare, Romania. Upon purchase, the oven can be relocated to Germany. Nsdpjxgf Drofx Aa Iodc

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Nodju U Iixepfx Aa Ijdc Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: like new (used), Year of construction: 2024, REHM P 300 W 0.8/1.0 with Profi trolley Condition: Demonstration machine Scope of delivery: - Abicor Binzel 401, 4m - Ground cable 5m - Pressure regulator Ndsdpfxsxamgbo Aa Isc - Basket spool adapter

Condition: good (used), Year of construction: 2007, machine/vehicle number: 193568, Offer 24606 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation Njdpjvt Twqefx Aa Iodc - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5861, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Nedpfx Aouy Ti Rea Iedc No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2005, Operational condition. Nsdpfxjxd Ad Ro Aa Iodc

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Njdpfx Aaewa Uwds Iodc Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. Ndedpfx Aou Rnd Dsa Ijc - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, welding current (min.): 45 A, welding current (max.): 450 A, For sale: Rehm Synergic Pro² 450-4 45-450 AMP 400 Volt 2/4 Strep 4 Roller drive 30 Steps adjustable Spot welding Interval welding Fixed programs Steel and Stainless Steel weldable Refurbished and tested Including a PRO5000 welding torch, earth work lead, gas cable, 10 meter interconnection hose, and 3 months warranty. Nedpfx Aaew Ni Afj Iedc Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195311, Offer 24601 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED Ndedpfjvt Trzex Aa Iec - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA and electric welding hand Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Gas-cooled torch head with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Njdpfeu U Ihzsx Aa Ijdc Ground clamp and ground cable 3.3 meters *

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195312, Offer 24596 Ndsdpfovt Tvmjx Aa Ijc Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 193567, Offer 24597 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation Ndsdpfxsvxhlys Aa Ioc - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - 1 piece earth cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Year of construction: 2014, condition: good (used), machine/vehicle number: 239615, Offer 22673 Nedpfx Ajm Udf Nsa Iodc Technical data: - Welding current max. 500 A 60% ED - 375 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 500 A - separate wire feed case with intermediate package 15 m - 4 roller wire feed steplessly adjustable - 2 stroke + 4 stroke regulation - digital volt + ampere display - spot welding - interval welding - water cooled hose package 4 m - ground cable 10 m - pressure reducer - connection 400 V / 50 Hz / 63 A - space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 300 kg