Compressed air tank

LOHENNER 2000 Liter

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam Lrsdpfxsxhg Ibe An Ijp - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a used BRANDT KDF 440 C edge banding machine from the HOMAG Group. Year of manufacture: 2017 Edge trimming unit Gluing unit Pressure zone Cutting unit (2-motor) Multi-stage trimming unit Profiling and corner copying unit (1-motor) Profile and flush trimming blade Jointing unit Feed rate: 14 m/min EVA & PUR compatible Ljdjzc D D Depfx An Ijrp PowerTouch control system PU pressure rollers Few operating hours Available from June 2026 In very good condition.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, The Arol Closys Eagle VP capping machine is an essential tool for companies looking to optimize their vacuum packaging process. It offers an effective solution for hermetically sealing 84 mm diameter jars, thereby guaranteeing optimal product preservation. Thanks to its advanced technology, it ensures a perfect vacuum inside the containers. As a result, the shelf life of food products is extended, and their quality is preserved. Furthermore, the capping machine is equipped with a lid-loading system, which simplifies the process and increases productivity. Moreover, the Arol capping machine stands out for its reliability and robustness, ensuring long-term use. In addition, it integrates easily into existing production lines, allowing for a smooth transition. On the one hand, its operation is simple and intuitive, reducing staff training time. On the other hand, it helps to increase yield without compromising the quality of the final product. As a result, companies can improve their competitiveness in the market. By choosing the Arol capping machine, you are opting for a machine that has proven its worth in numerous industries since 2011. Consequently, it meets the strict requirements for hygiene and food safety. In summary, this capping machine is the ideal tool for improving the efficiency of your packaging chain while ensuring customer satisfaction. Technical specifications: Jar diameter: 84 mm Lsdpeu Nwiysfx An Ierp Vacuum capping machine Lid-loading system Year: 2011

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado FÜ + PU SPS-compatible control with 7" TFT color touchscreen display CM-CombiMelt unit for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Lredpsv Sm Hcefx An Iop Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush trimming – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Soundproof enclosure with space extraction Cleaning set with 4-way spray system, fine buffing unit, and sliding agent spray equipment First delivery in 2006 Machine has been WORKSHOP TESTED and is in TOP CONDITION The gluing unit was recently fully serviced and wearing parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Available immediately -

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg Lsdsxu Dxqjpfx An Isrp dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: good (used), Year of construction: 2007, functionality: fully functional, For sale: an edge banding machine of the brand Brandt KDF 660. Lsdpfx Anjyhqa Ns Ierp

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Lrsdpfxozb Iuqe An Ijp Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: used, Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine in full configuration, incl. a total of 3 interchangeable glue application units, 1 of which for PUR adhesive Material dimensions: Roll material: - Paper and plastic edges: 0.3 - 3.0 mm Lrjdpfx Anjybbays Isp - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine’s equipment: Infeed guide rail, automatic adjustment via program Release agent application Joint trimming unit with 2 motors, each 4 kW Blow-off nozzle for removing loose particles Gluing unit with 1.8 L glue application, with QUICK-LOCK with single roll/strip magazine 1 main pressure roller and 3 follow-up pressure rollers Automatic pressure zone adjustment via program End trimming unit with 2 motors, 660 W, swiveling 0 to 8 degrees Corner rounding / copy milling unit with 2 motors, 180 W and 2 motors, 400 W Max. workpiece thickness 60 mm Max. feed speed 20 m/min Automatic adjustment via program Profile scraping unit Glue joint scraping unit Cleaning agent application Buffing unit with 2 motors, 180 W Control system ICOS open TS, PC-based

Condition: new, Year of construction: 2013, 0,4 - 15 mm Workingpiece thickness from to 10 - 60 mm Lrjdpfx Ansx Dng Rj Iep Feed speed 18 m/min.