Magnetabscheider
mütek HAWK-EYE

Name: mütek HAWK-EYE
Brand: mütek
Price: 5990 EUR
Availability: InStock

Fixed price plus VAT

€5,990

Year of construction

2025

Condition

New

Location

Neckartailfingen Germany

Show map

Machine data

Machine type:: Magnetabscheider

Manufacturer:: mütek

Model:: HAWK-EYE

Year of construction:: 2025

Condition:: new

Price & Location

Fixed price plus VAT

€5,990

Location:: Grienweg 38, 72666 Neckartailfingen, Deutschland

Call

Details about the offer

Listing ID:: A3671440

Reference number:: Neodym

Update:: 27.05.2025

Description

*Only the neodymium overbelt magnet is offered, not the conveyor belt underneath.

*Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets.

Djdpfx Adsdubpujdjwf
Extremely high degree of separation, depending on the bulk height and the starting material.

Probably the most compact overband magnet on the market.
The competition often uses the less powerful ferrite magnets to save costs.

dimensions approx.
Length: 104cm
Width: 22cm
Height: 28 cm (at the motor)

*Without controller
Surcharge for simple manual start/stop control + 495 €

A high-performance industrial neodymium magnet is installed.
High-performance neodymium magnet approx. 600x68x36.5 mm
* So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic.

This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site

Ideal for separating nails from wood chips.
Optionally also in a single-shaft shredder that is sucked off

Requirements:
*Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm
*Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm.

-----
Optional at extra charge:
Cross and ascending belt demonstrators from € 7,995 net

Seller

Registered since: 2005

48 listings online

Call

Send inquiry

Telephone & Fax

+49 711 5... show

+49 711 9... show

Fax:

These listings may also fit your interest.

Listing

Metal separator in pipe, Pipe Magnet mütek Systemtechnik Hawk-Eye

Neckartailfingen

6,836 km

Metal separator in pipe, Pipe Magnet
mütek SystemtechnikHawk-Eye

€995

Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener Djdpfx Adochuvredowf +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

See details

Listing

NEUE HERBOLD HDPE Film washing line NEUE HERBOLD HDPE Folienwaschanlage

Sinsheim

6,862 km

NEUE HERBOLD HDPE Film washing line
NEUE HERBOLDHDPE Folienwaschanlage

Call

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) Dedpfotuui Dox Addjwf brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

See details

Listing

Overband magnet Block magnet Magnetic plate mütek Hawk-Eye

Neckartailfingen

6,836 km

Overband magnet Block magnet Magnetic plate
mütekHawk-Eye

€970

Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request Dwodpfotqfhxox Addef The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

See details

Listing

Bale press HSM V press 1160 plus , v press 1160 max

Kosorowice

6,220 km

Bale press
HSMV press 1160 plus , v press 1160 max

€5,800

Fixed price plus VAT

Call

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Dsdpsra Nyuofx Addowf Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

See details

Listing

Frankfurt am Main

6,882 km

Havy duty
Eric SchombergES 60 / 120

€17,500

EXW ONO plus VAT

Call

Listing

Bad Sooden-Allendorf

6,793 km

Bagging filter
NestroNasf 4/3

Call

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area 31,2 m² RH 3500 mm fan 5,5 kW diam. 250 mm on 300 x 240 mm Brackets Feet Cover and filter bags Unfortunately, we cannot answer inquiries without complete contact information. Dodpfx Adeiamtpjdowf

See details

Listing

Wide belt sanding machines Holytek SB-38

Mediniai Strėvininkai

5,912 km

Wide belt sanding machines
HolytekSB-38

Call

Condition: new, Working width: 381 mm Working height: 150 mm Main engine 7,5 HP 3P Feed motor 1/4 hp Feed speed 6.2 m/min grinding belt dimension 405 x 1372 mm Machine size 1000 x 730 x 1680 mm Packing size 750 x 830 x 1900 mm N.W./G.W. 450/500 kg You can call or write us. We can speak and write German and Russian. You can also send messages in English. 34.4.4. Dwedpfx Adjk Rit Nsdof

See details

Listing

Marano Vicentino

6,667 km

Wide belt sander
VietRR-1350

Call

Condition: excellent (used), Year of construction: 1988, utomatic wide belt sander with 2 belts for varnish, wood, veneer, composite materials and various materials Technical data: Working width mm 1350 Max useful height mm 130 Belt size mm 2450 x 1350 Composition: 1° Group: Sanding roller diameter mm 320 - sh. 60 - Blowers cleaning belts - Motor Kw 11 with speed variator 2° Group: Sanding roller diameter mm 320 - sh. 40 - Blowers cleaning belts - Motor Kw 11 with speed variator Dwedpfx Adegmbu Isdjf Scotch brite - Motor Kw 1,5 Vacuum table - Motor Kw 5,5 Feed belt speed variator 4/19 mt/min Operating pressure 7 Bar equipped with Abrasive belts series Overall dimensions: machine mm 2000 x 2700 x 2500 vacuum pump mm 800 x 700 x 900 h

See details

Listing

Mono Rotor Shredder/shredder/shredder Recycling Shredders & Solutions NL. 600 serie MR

Wijk bij Duurstede

7,116 km

Mono Rotor Shredder/shredder/shredder
Recycling Shredders & Solutions NL.600 serie MR

Call

Year of construction: 2024, condition: new, RSS 600 series Mono Rotor Shredder new model 2023 full options model. 18.5kw 40x40 knife block. rotor length approx. 600 mm infeed hopper approx. 600 x 900 mm Screen size in consultation motor cover and pusherbox guide strips as well PLC controlled with Reverse action as well an manual reverse. Conveyor and/or discharge screw is optional available. CE certificate/ Dutch suitable for various types of plastic/wood/or other material delivery in consultation Adjustments to e.g. motors, sieve, frame possible. Dodpfxoirt H Ao Addewf Infeed or discharge conveyors, storage, metal separation possible. Larger or smaller models also available. Intrested, reactions with your name, company name and telephone number. We will call you.

See details

Listing

Stainless steel shredding system Willenberg 4.500.900

Wiefelstede

6,930 km

Stainless steel shredding system
Willenberg4.500.900

€5,150

Fixed price plus VAT

Call

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW Djdpfeh Di H Dex Addewf -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

See details

Advertise here

Magnetabscheidermütek HAWK-EYE

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Magnetabscheider
mütek HAWK-EYE