Hard stone slab, granite slab, granite block, hard stone block, angle block, angle block machined on

1590 x 300 x 470 mm

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Dwodpfx Apernnt Ij Dec Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: good (used), CV saw grinder VOLLMER model CNE Dodpfx Aevgdc Dsp Dswc

Condition: new, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,265 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004183 The Garden Trailer 201 TIPPING car trailer from UNITRAILER, with a permissible total weight of up to 750 kg, features a folding rear gate, allowing for quick loading and unloading in just a few minutes! Thanks to the use of a tilting drawbar, it can be positioned vertically on the rear gate at any desired location. All formalities related to the purchase will be taken care of for you. When ordering a car trailer, please specify the permissible total weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 201 TIPPING car trailer CHASSIS - Steering axle from Knott or AL-KO Djdpfjir H Rpex Ap Dowc Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer's base plate at any time BODY - Supporting frame made of hot-dip galvanized steel sheet Curved profiles are used with screws Loading area: non-slip and water-resistant screen-printed base plate, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel Shipping costs will be charged separately.

Condition: new, Various bimetal saw blades, HSS, in the following dimensions: 1735 x 13 x 0.9 mm 1630 x 13 x 0.9 mm 1440 x 13 x 0.65 mm 1138 x 13 x 0.65 mm 2375 x 20 x 0.9 mm 2465 x 20 x 0.9 mm 2085 x 20 x 0.9 mm Dsdoc R Tyfspfx Ap Djwc 2130 x 20 x 0.9 mm 2140 x 20 x 0.9 mm 1900 x 20 x 0.9 mm 2000 x 20 x 0.9 mm 2750 x 27 x 0.9 mm 2835 x 27 x 0.9 mm 2850 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 3150 x 27 x 0.9 mm 3320 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 2910 x 27 x 0.9 mm 2450 x 27 x 0.9 mm 4530 x 27 x 0.9 mm 4500 x 27 x 0.9 mm 4400 x 34 x 1.5 mm 4640 x 34 x 1.1 mm

Condition: new, Technical data for the grating: Manufacturer: Gi-Ro Vreden Condition of the product: new (unused) Reason for return: incorrect order by end customer Included in the scope of delivery: 1x pressed grating, new (unused) Material color: hot-dip galvanized Overall depth: 1,000 mm (direction of load-bearing bar) Overall width: 980 mm (direction of cross bar) Load-bearing bar dimensions: 35/1.7 mm S355JR Slip resistance of load-bearing bars: no Slip resistance of cross bars: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Dwedpfsk Ebq Tsx Ap Djc Weight: approx. 9.35 kg | per piece Internal designation: R

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Dsdpsw Nklhjfx Ap Dswc Good condition

Condition: used, Air demolition hammer -Operating pressure: 7 bar Dsdpfxjcm I Uie Ap Dewc -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg

Condition: good (used), Manufacturer: Containerbau Hameln / Weser-Container Dimensions: 5500 x 2300 x 750 mm Dwsdpfxsrk Nw Aj Ap Djc Available quantity: 5 pcs. Years of construction: 3 x 2005; 1 x 2014; 1 x 2015 Load capacity: 15000 kg Tare weight: 2234-2240 kg Floor: 5 mm steel Sides: 3 mm steel Hook mount: according to DIN 30722 Outer rollers: with gunmetal bushing and shaft lubrication Tailgate: watertight with rubber seal Roof: hydraulic, with hand pump, tilt cylinder and stop on driver's side

Condition: used, System: Chamber filter press used Type: Passavant Field of application: Sludge dewatering Design: Overhead beam Filter plate size: 1500x1500 Number of plates: 160 pieces Filter plates: PP Filter cloths: optionally available adapted to the medium Filter area: approx. 614.5 m² Press contents: approx. 8400 dm³ Filter pressure: approx. 15 bar Dwsdpfewqyf Usx Ap Doc Pump technology: optional Purchase or rental: Inspection of the system by arrangement at our site.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Machine No.: 89040419 Dwedpjwqydkefx Ap Dsc Year of construction: 1994 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Washing system: No Conveyor technology: Conveyor belt underneath Discharge: Telescopic conveyor belt Kastner Polymer system: Alltech 3-chamber Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement at our works.