Anvil with rounded horn and rectangular horn; anvil in North German design, pointed horn

160

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Ljdpfx Aszdqdfjbyjrn Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Lsdpfxjwlgdys Abysrn Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, filter and valves -Type: NHY-40-12.2-160-4/400/230V -Hydraulic pump: Pressure up to 200 bar Lrodpfxozg Emye Abyon -Flow rate: 12 l/min -Motor: -Hydraulic reservoir: with level indicator -Individual components: see photos -Dimensions: 515/415/H680 mm -Weight: 79 kg

Condition: used, functionality: fully functional, Grinder for mincing meat Ljdpfx Abexrhbkjyern Manufacturer: Sind Voltage: 380 / 50Hz Power: 15kW Size: 1550x900x1300mm Weight: 493kg

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Lredpsmw Ukcjfx Abysn Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: new, Grinder Sind 160 mm Model: AG 160 S Holeplate diameter: 160 mm Ljdpjul T Aaofx Abyern Hopper content: 400 liters Throughput depending on material type, speed, cutting set: 7000 kg/h 2-speed working worm and 3-speed feeding worm – independent Dimensions: 150x165x198cm Electric power: 33 kW Voltage: 380 V, 50 Hz Machine weight: 1600 kg

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lrodjxmg R Topfx Abysn Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW Lredpfx Ajha Hvvobyen -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: used, Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Lsdpfx Absiqpc Aoysrn Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 150 Length: 150 Height: 180

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 9 h, load capacity: 16,000 kg, lifting height: 4,000 mm, free lift: 1,480 mm, fuel type: diesel, mast type: triplex, construction height: 3,030 mm, power: 128 kW (174.03 HP), fork carriage width: 2,450 mm, fork length: 2,400 mm, empty load weight: 19,300 kg, total length: 4,830 mm, drive type: Diesel, construction width: 2,490 mm, Heavy-duty forklift – Diesel Load center: 600 Fork width: 200 mm Fork thickness: 90 mm Mast type: Triplex Transmission: Torque converter Speed class: 20 Lodpfx Abozgyblsyorn Condition: New Technical condition: New Front tire type: Superelastic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 12.00-20 Rear tire condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, air conditioning, CE certificate, scale, dual tires, exterior mirrors, rotating beacon, heated seat, LED, rear-view camera system, heated mirrors, radio

Condition: excellent (used), Height adjustment for vise (28660) Mounting surface for vise diameter 180 mm Hole distance 145 mm Mounting surface for workbench 180 x 135 mm Weight 10.5 kg Ljdpfx Abew Ic Hheysrn

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m Lrjdpfezgt Hnsx Abyen total weight: 10900KG

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 08/2027, year of last overhaul: 2026, total length: 1,200 mm, total width: 1,400 mm, input frequency: 50 Hz, empty load weight: 1,500 kg, overall weight: 1,500 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral mixer Diosna TOP model: SP 160 AD with 2 removable mixing bowls Mixing machine for a maximum of 160 kg of dough with 2 timers and 2 speeds robust technology Connection 400V, 32A-CEE plug Ljdpfjvvqqmex Abysrn Used machine, refurbished with warranty + service Option: Maintenance contract Service package Delivery & foundation work Instruction & commissioning Loan machine service We offer a wide selection of spiral mixers!

Condition: new, Manual hand unit , J/N Ledpfsytx T Uex Abysrn Automatic for single pieces Ja J/N Automatic for frames Ja J/N

Condition: used, used fan Motor: 1.5 kW Lrodpfew I U Iwsx Abysn 2670 rpm Availability: short-term Warehouse location: Rhineland-Palatinate