Manure spreader

Bemester

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Hedpfx Aajvv Dp Nsmsh

Condition: new, Year of construction: 2025, operating hours: 1 h, Equipment: all wheel drive, Claas Arion 660 Cmatic CEBIS New machine, year of manufacture 2025, approx. 5 operating hours Specification: 540/65 R30 Mitas AC65 / fixed rim 650/65 R42 Mitas AC65 / fixed rim CLAAS front linkage 4.0 t incl. vibration damping Electronic position control for front linkage Reinforcement frame for transmission, engine side rails for front loader External control for front linkage CEBIS control terminal with touch function CMATIC incl. engine speed memory plus CSM, CEBIS ISOBUS pre-installation, rear Task Control Basic activation, tractor side CEMOS demo version – 400 h AUTO PILOT / GPS PILOT Ready SAT 900 GNSS receiver - RTK NET activation CLAAS communication module (LTE) CEMIS 1200 terminal ISOBUS activation for CEBIS GPS PILOT activation – SAT 900 GNSS receiver Data volume for RTK NET usage – 5 years ELECTROPILOT Machine Connect license – 5 years Video function activation CEBIS + CPC in-cab connection for 2 cameras Steering interface prepared Electronic hitch control (EHR) Lower links Cat. 3 with stabilizer hooks Automatic lower link side stabilizers Hydraulic top link, stabilizer hooks Cat. 3 Hedpsx R N S Rsfx Aamoh Hitch block with sliding drawbar Rear linkage, increased lifting capacity Automatic drawbar with 38 mm pin diameter Ball set Cat. 3/2 Compressed air brake system (2-circuit) Automatic trailer stretch brake Hydraulic system load-sensing 150 l/min 4 + 2 spool valves, electrohydraulic proportional (CEBIS) 2 front couplers / 1 pressureless return Power-Beyond, LS connections without flat face coupler CMATIC transmission, stepless Transmission ratio 50 km/h Front axle PROACTIV with wet disc brakes Rear axle, standard, 275 mm PTO 540/540 ECO rpm PTO stub shaft 6-spline, 1 3/8 Steering angle sensor for braked PROACTIV front axle 205 hp max. output, 196 hp homologated rated output, ECE R 120 Main battery switch, electronic Fuel tank 370 l 4-post cab with 4-point suspension Roof with glass hatch Tinted rear window for 4-post cab Rear window wiper, incl. right-side wiper Electric mirrors, incl. wide angle mirror Fender extensions 2.55 m overall width, wheel diameter less than 1.93 m 2 terminal rails, roof liner and A-pillar Removable toolbox, left Additional interface sockets 2 LED front headlights, A-pillar Rear lights, standard, LED with warning panels 4x LED driving headlights, 2x LED work lights on hood LED work lights – premium LED work lighting – premium Comfort seat, fabric, semi-active longitudinal/horizontal suspension Passenger seat with seatbelt Automatic climate control, incl. Cat. 3 preparation Radio sound system, digital (DAB+) Steering wheel, leather 2 LED beacons, foldable LED equipment package premium Connect Package II – Documentation, Guidance Driver Package Premium | Internal no.: 11283707

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 1,59,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle * 1st hand * See photos for condition * Original only 8,682 operating hours * Front. - and rear PTO * Municipal hydraulics front and rear * Front mower * Mulag boom MRS300 * Mulag RMK1200 verge mowing head * Rear mower * Mulag rear boom MHS800 * with Mulag MK1200 mowing head * Municipal hydraulics & rear hydraulics * Rear power lift * Mulag MRS 300 verge mower * Ideal for mowing in areas close to roads in left and right hand operation. - and right-hand operation * 3-point attachment to front linkage * Reach up to 3.00 m * Drive via front PTO shaft * Electric hydraulic control * Mower head relief * Path-dependent automatic sensing system * RMK 1200 verge mowing head * Working width 1,200 mm * Telescopic rear boom Mower MHS 800 * Transverse displacement 1,600 mm * Reach left and right 8.70 m * Automatic terrain scanning * High portal for driving over obstacles up to 3.90 m * One-hand control panel with multifunction lever * Quick-change device * Mulag MK 1200 flail mower head * Total width 1,580 mm * Boom utilization * Comfort cab with 2 seats * Air conditioning * Front windshield heating * Outside temperature display * Comfort driver seat * Heated electric mirrors * JCB Power Shift transmission with three powershift steps * Disc brakes * ABS * Differential lock * Rotating beacons * Wide warning lights * Working lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor agricultural tractor * Wheelbase: 3,000 mm * GVW: 12,000 kg * LOF registration * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Hjdpsvhqbcofx Aamjh Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2015, operating hours: 4,108 h, power: 151 kW (205.30 HP), Equipment: air conditioning, all wheel drive, cabin,

Condition: excellent (used), Stainless steel tank 2 m3 Hjdpfx Aeq U Aufsameh

Condition: used, Year of construction: 1997, operating hours: 11,810 h, power: 65 kW (88.38 HP), Equipment: all wheel drive, cabin, John Deere 6200 with front loader Contact person: Ludwig Hilmer: tel. * Email: L. Equipment: * Industrial front loader * Rear PTO with 540 rpm and 1000 rpm * Rear hydraulics * Work lights * Rotating beacon * Mechanical top link * Toolbox All information provided without guarantee. Errors and omissions excepted. Hsdpjx T E Dujfx Aameh Important: New and used commercial vehicles from IVECO (2.9t to 44t) in stock. New, used and nearly new vehicles of all types and weight classes available at short notice. We naturally also accept your used vehicle as a trade-in at a fair price!

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding Hjdpfx Aasxu I T Eomoh The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: used, Year of construction: 2001, sheet thickness steel (max.): 6 mm, back gauge: 500 mm, cutting length (max.): 1,000 mm, Hydraulic Guillotine Shear Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Technical Specifications Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Usable Length: 1000 mm Sheet Thickness: 6 mm Dimensions: L 1.50 x W 1.70 x H 1.60 m Weight: 1.6 t Features • Manual backgauge 500 mm • Angle stop Hjdev I T N Njpfx Aamoh All information is subject to change. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Hodpeuqdi Uofx Aamoh Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: used, Good day, We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Hedpotk N E Aefx Aamoh Do you have any questions? Then we are at your disposal.