Tryout Press - hydraulic

HIDROLIKSAN HD 100

Condition: new, pressing force: 100 t, stroke length: 400 mm, clearance between the columns: 1,010 mm, overall weight: 1,000 kg, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1010 mm - Electrically or manually operated - pressure gauge - Emergency stop - 400V Nwodor Ei Szspfx Ad Iek

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph Nodpfxjt Hwfns Ad Iewk - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: new, stroke length: 400 mm, distance between stands: 2,000 mm, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 2000 mm Nwsdpfxjwbutus Ad Iok - Electrically or manually operated - Pressure gauge - Emergency stop - 400 V

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 4,8 mm/sec feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1550 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Nodpfxsvu E Uwe Ad Iswk Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm Nodpswm Rm Iefx Ad Iewk cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm Njdpfx Aou Idbysd Iewk tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Nwodpfx Aoqgcdtsd Iok Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Condition: good (used), functionality: fully functional, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 4,200 kg, empty load weight: 4,200 kg, operation weight: 4,200 kg, maximum load weight: 1,900 kg, lifting power: 1,900 kg/m, lifting height: 3,065 mm, tire size: 12.5-18, tire condition: 85 %, axle configuration: 4x4, number of seats: 1, shovel volume: 0.75 m³, digging bucket width: 1,750 mm, Year of construction: 2014, operating hours: 4,482 h, Equipment: additional headlights, all wheel drive, differential lock, head guard, == KEY SPECIFICATIONS == Year: 2014 Hours: 4,482 h Operating weight: 4,200 kg Bucket capacity: 0.75 m³ Tipping load: 3,000 kg Payload: 1,900 kg Drive: Hydrostatic Four-wheel drive Engine: Deutz Engine power: 45 kW Maximum speed: 30 km/h Tyres: 12.5-18 CE certification: Yes == EQUIPMENT & FEATURES == Hydraulic quick coupler Parallel-controlled loading system Nwodpszqzv Sjfx Ad Isk All-wheel steering Self-locking differential Enclosed cabin Road lighting == INCLUDED ATTACHMENTS == Skeleton bucket == CONDITION == Used condition with visible signs of normal commercial use. The machine shows scratches, paint wear and surface corrosion, as shown in the photographs. Inspection and operational testing are possible by appointment. == DESCRIPTION == Used Kramer 750 wheel loader from 2014 with 4,482 operating hours. Compact and manoeuvrable wheel loader equipped with all-wheel steering, a hydraulic quick coupler, an enclosed cabin and a loading bucket. Suitable for construction, landscaping, agricultural work and general material handling. == PRICE, LOCATION & DELIVERY == Price: On request Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost. Nwodpfxjid Szce Ad Ijk

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Nwjdpohpqqusfx Ad Ijk Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to