Concrete mixer truck

Betonmischer 8m³

Condition: excellent (used), Year of construction: 2012, 6-axis industrial robot ABB IRB6640-205/2.75 Tjdpfeixqn Tox Ac Nef year of construction 2012 with connection cable ,Teachpanel ,IRC5 switch cabinet and robot body We have many more industrial robots in stock.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,900 h, machine/vehicle number: #652, load capacity: 350 kg, mast type: telescopic, lifting height: 28,000 mm, platform length: 1,800 mm, platform width: 800 mm, overall weight: 7,490 kg, transport length: 7,550 mm, transport width: 2,500 mm, construction height: 3,450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral reach: 20.50 m Overall length: 7.55 m Overall height: 3.45 m Overall width: 2.50 m Platform capacity: 350 kg Permissible total weight: 7,490 kg Work basket (l x w x h): 1800 x 800 x 1100 mm Swivel range: 540° Basket rotation: +/- 85° Stabilizers: 2.56 / 3.90 / 5.10 m Other: - Basket arm 195° - Crank rotary table - Automatic basket arm rest - Roof protection grid 04/2024: Clutch + master-slave cylinder replaced and oil pan & fuel filter sealed 09/2024: Right joystick module replaced 10/2024: Fuel filter, basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck battery replaced 04/2025: Solenoid coil As of 28.04.2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST Todpfxewnq Dpe Ac Nsf

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm Todpfx Asid I T Ijc Nof motor power 2,2 kW Motor speed 2825 rpm Optional adapter for Amada system available Pictures similar

Condition: new, The ACE Laser Compact 1313 2.0 R, a state-of-the-art Laser Cutting Machine from KNUTH, is designed to set new standards in price and performance within the Laser Cutting Machines product group. This compact laser cutter is optimized for highly efficient processes, making it ideal for both large production centers and smaller workshops due to its minimal footprint. Built on a robust steel weldment frame, the machine features a lightweight gantry constructed from aluminum die-cast, ensuring both high rigidity and superb dynamics. The linear guides on all axes provide exceptional precision and require minimal maintenance, supported by preloaded ball drives that enhance positioning accuracy. You can easily monitor the cutting process through a safety glass window, while its intuitive PC-based control allows for straightforward operation with a technology database that simplifies programming. The ACE Laser Compact 1313 2.0 R ensures top performance in laser cutting with its powerful Raycus laser source, automatic focus positioning, and efficient nesting software that minimizes material waste. To find out more about this impressive Laser Cutting Machine or to request a quote, please visit our website. Tedpfx Aonh Ng Doc Nsf

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm Tedpshglvkjfx Ac Nsf - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Todpfx Asfzb Niec Njf Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV Todpfx Aced Hy Els Nsf with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Todpfewq Dpqox Ac Nef Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Tsdpfxjnh Nu Us Ac Nsf

Condition: used, Year of construction: 2001, machine/vehicle number: 410116, Equipment: rotational speed infinitely variable, Machine with robot (40 tools). Probably to remove the play on the Y axis. Fully functional. Tjdpfx Aewrt Ixsc Nsf