Double-decker bus

Doppeldecker Siebmaschine

Year of construction: 2002, condition: used, Plant: Used decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Decapress Dlodpfxeppt Sfe Addea Machine No.: 2884 Year of construction: 2002 Maximum drum speed: 3800 I/min Inner diameter of bowl: approx. 450 mm Drum material: HII/St52 Electric motor: 30 kW Total mass: approx. 3650 kg Purchase and rent possible.

Condition: good (used), Screen area: approx. 1,300 x 4,000 mm Dljdpfx Aetpgvxeddsa new semi-mobile steel construction

Condition: good (used), functionality: fully functional, Screen area: approx. 1,400 x 2,800 mm with plastic screen panels 1.5 x 11 mm Dlodpfxetpaydo Addja Straightener SCHENCK DF3 Drive station Steel construction with discharge box

Condition: as good as new (ex-display), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0605.1283, TEMA flat vibrating screen Type OZB 90/360-55. Drive 2x Unbalance P= 2,1 kW. Screen deck width 900mm. length 3,600mm. Including: support frame (as visible in the picture). Is in good condition. Few running hours. Has always been used as a demo/test screen. Djdpfx Ajqwclqjddela Available immediately.

Condition: reconditioned (used), Year of construction: 2003, Asteca 2200x5500 double decker screens Dsdpfx Aoim D U Asddsla Asteca double deck screens on chassis Spring springs Metal structure 30hp engine

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 19,720 h, load capacity: 5,000 kg, lifting height: 6,800 mm, free lift: 1,950 mm, fuel type: diesel, mast type: triplex, construction height: 3,150 mm, power: 55 kW (74.78 HP), motor manufacturer: VW Industrie, DGUV certified until: 11/2026, fork length: 1,000 mm, overall weight: 7,250 kg, Equipment: CE marking, UVV, air conditioning, cabin, full service history, lighting, seat heater, sideshift, Linde H 50 D-02 Diesel Forklift with the following specifications: Lifting capacity: 5,000 kg Lift height: 6,800 mm Overall height: 3,150 mm Year of manufacture: 2018 Operating hours: 19,720 Dlodpexcg N Ujfx Addja Linde 5.0 ton diesel forklift with full cabin and heater, air conditioning, 4-cylinder engine, triplex mast with full free lift, 3rd valve, 4th valve, dual pedal, fork length 1,000 mm (other fork lengths available), suitable attachments on request. These units come from LINDE Full-Service and have been continuously maintained without regard to cost, resulting in no maintenance backlog! (Currently 2 units out of a total of 6 still available) For more information about the machine, feel free to contact us by phone or email. Affordable transportation can be provided with our own ramp low-loader, but this is not included in the offer. Sale is exclusively to commercial buyers. Subject to prior sale, errors, and typing mistakes. You can find more information and offers on our website!

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-600E/NC, pressing force: 600 t, table width: 990 mm, table length: 890 mm, operating speed: 5 mm/s, overall weight: 23,000 kg, reverse speed: 18 mm/s, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Dsdowpggijpfx Addola Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: ready for operation (used), Vibrating Chute Hazemag Brand: Hazemag Dedpfxouht Dzs Addsla *Dim. Vibrating Chute: Length 1500 mm – width 1000 mm. Driving: 2 pieces vibration motors of each 2 kW Incl.: springs *Dim. Vibrating Chute: Length 2500 mm – width 1100 mm. Driving: 2 pieces vibration motors of each 1,1 kW Incl.: springs

Condition: used, fuel type: diesel, color: yellow, Year of construction: 2017, machine/vehicle number: 2496988, Equipment: UVV, all wheel drive, cabin, differential lock, pallet forks, * Tare weight 4.3 t * Tires 12.0-18 * Backhoe bucket width 1.65 m * Backhoe bucket capacity 0.7 m³ * Bucket capacity min. 0.7 m³ * Steering type KL * Transport length 5.035 m * Transport width 1.625 m * Transport height 1.46 m Dledpfxeqya Nvj Addea * Travel speed 20 km/h * Max. dumping height 2.51 m * Outside turning radius 8.21 m * Lifting force 35 kN * Engine manufacturer Volvo * Engine type D 3.1 A * Engine power 36.4 kW * Displacement 3.108 l * Speed at max. torque 2300 rpm * Number of cylinders 4 * Cylinder bore x stroke 94x112 mm

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drainage: Ø 64 mm -Number: 4x available Djdpfeb Uhnbjx Addsla -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg