Generator set

FRAMES Biogas Processing Plant Complete Biogas Pro

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Podpfx Ajpu A D Aeb Iogw Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Year of construction: 2002, condition: like new (used), L x W x H: approx. 12,1 x 3,0 x 3,25 m Volume: 55 cbm capacity: approx. 150 m³/h 6 dosing-/discharging-screws - pair driven each 11 kW Pedpfxsllvpzs Ab Iegw weight: approx. 15 t.,

Condition: used, Year of construction: 2009, System: Decanter Type: ALDEC G2-80 Year of construction: 2009 Machine No.: 5024392-2009 Speed: 3650 rpm Drum diameter: 80/263 mm Control cabinet: Rittal 400V-50Hz Other: incl. frequency converter and complete documentation Separation technology: Sludge dewatering by means of decanter centrifuges (solid bowl scroll centrifuges, decanters). The high centrifugal forces, due to different densities, separate the fine solids from the suspension. Pgjdpfowqc Sdex Ab Isw

Condition: used, Used Line for Oil Production ALFALAVAL up to 1500 kg/h The continuous cycle olive mill operates as a complete system, producing oil with a capacity of up to 1500 kg/h. Moreover, each component features high-quality materials, primarily stainless steel, ensuring durability and compliance with hygiene regulations. Loading and Washing System To begin with, the bin tipper feeds olives onto a conveyor belt, maintaining a continuous and consistent flow toward the washing phase. Subsequently, the washer with leaf remover separates leaves and impurities effectively. In addition, the stainless steel Alfa Laval washer with an integrated cyclone cleans the olives thoroughly. Meanwhile, a hopper and screw feeder deliver the olives to the crusher, preserving their quality through stainless steel construction. Crushing and Paste Transfer After washing, the stainless steel hammer crusher Rapanelli, mounted on a steel frame, crushes olives uniformly at a capacity of 25 q/h. Then, a pump transfers the paste to the malaxers, which play a crucial role in the process. Furthermore, six stainless steel tanks, each holding 600 liters, malax the paste. As a result, pneumatic valves control loading and unloading, while inspection windows provide a clear view of the process. Notably, anti-condensation doors, coded green for loading and red for unloading, enhance functionality. Decanter and Separation At this stage, the Alfa Laval decanter 716B-11G processes 12-15 q/h of paste. Consequently, the decanter separates oil and water into a stainless steel tank while a vibrating screen removes residues. Additionally, pumps handle the transfer of water and oil, and an 11-meter stainless steel screw conveyor moves the pomace through a hopper. Moreover, two Alfa Laval centrifugal separators (models 407-AGT and 507-AGT) refine the oil with high efficiency. Automation and Control On the automation side, the system relies on an electrical cabinet that automates and supervises operations. For this reason, a dedicated Touch Screen PC enables operators to monitor every phase of the process in real-time. Accordingly, this advanced control system minimizes manual intervention, ensuring precision and smooth operation. Operating Conditions Psdjvgu U Djpfx Ab Isgw The Used Line for Oil Production ALFALAVAL is running smoothly for the current campaign. Furthermore, its modular design and durable materials ensure longevity and simplify maintenance. Meanwhile, stainless steel piping preserves the oil’s organoleptic properties and prevents contamination. In conclusion, the Used Line for Oil Production ALFALAVAL up to 1500 kg/h provides an efficient and complete technical solution for producing high-quality oil.

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Psdpfovz Dddjx Ab Iogw Model: ALDEC 406 Mach. No. 512-0006.01 Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 1,700 kg, fuel type: diesel, tank capacity: 180 l, color: white, output current: 435 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 110 kW (149.56 HP), continuous power: 100 kW (135.96 HP), total length: 2,750 mm, total width: 1,100 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 100 (100kW - 110kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 100R SZR - Maximum power - 110 kW / 140 kVA - Rated power - 100 kW / 125 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo R6105AZLDS Fuel type - Diesel (Diesel) Combustion: - 22.0 liters per hour (at 75% of maximum power) - 14.5 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 7000 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274D 400V rated power - 100000 watts (100kW / 125kVA) 400V maximum power (up to 15 minutes) - 110000 Watt (110kW / 140kVA) Rated power 230V - 33000 watts 230V maximum power (up to 15 minutes) - 36600 Watt Rated current (400V) - 435.0 A Current protection - C16, C32, main - 200A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Pgodpstpnm Uefx Ab Isw Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 180 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 110 x 275 x 145 cm Gross weight - 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - Electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 120Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Pjdjvztb Sspfx Ab Ijgw Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Tube Deposit Unit -500

Year of construction: 2016, condition: ready for operation (used), Cup diameter: 75mm, max. output: 6000 cups/h, filling capacity: 30-200ml, with outfeed conveyor and take-off turntable, without printer. Psdpfx Aondn Euob Ijgw

Year of construction: 2013, condition: used, functionality: fully functional, Opportunity! Breton Combi Cut, built in 2013, with shuttle table and waterjet unit including KMT pump: Available at short notice, fully functional, and can be inspected under power. Assembly and disassembly by factory technicians possible. Shuttle table Tilt table Pgedpfjwfqrujx Ab Iow The weapon for ceramics and natural stone See attached order confirmation.

Condition: used, operating hours: 50,000 h, Used Bottling Line KRONES with Aseptic Filling 36000 bph The used KRONES bottling line with aseptic filling 36000 bph provides a highly efficient solution for the beverage and dairy industries, meeting productivity and quality demands in high-capacity production environments. This system ensures the highest standard of sterilization, preserving the organoleptic properties and food safety of the bottled product. Furthermore, it is designed to offer consistent performance throughout long production runs. The process combines Blow-Fill-Seal (BFS) and wet aseptic technology, ensuring full aseptic integrity throughout the production flow. Line Speed and Capacity The Used aseptic line KRONES processes 36000 bottles per hour (bph), on the format 500 ml, making it suitable for high-capacity production. It handles PET containers and supports various formats, including 0.3 L, 0.4 L, 0.5 L, and 1.0 L. Moreover, the system can adapt from 250 ml up to 1.5 L bottles, offering a broad production flexibility. In addition, this versatility makes the line ideal for different applications in the beverage industry, including milk, juices, tea, and flavored water. As a result, the line adapts easily to various markets and production demands by configuring different container sizes. Therefore, it offers flexibility for a range of product types. Aseptic Filling Technology in the Used aseptic line KRONES The line’s aseptic filling system eliminates microbiological contamination. Moreover, the sterilization and filling processes occur while keeping the product sealed in aseptic conditions, minimizing preservatives and ensuring a long shelf life without refrigeration. This process is critical for handling sensitive products like milk and fruit juices, which require advanced sterilization to maintain their nutrients and natural properties. Consequently, the line ensures that all products meet stringent quality and safety standards. The aseptic filling technology includes electronic volumetric filling valves with an accuracy of ±0.3%, supporting both cold filling at 20 °C and ambient temperature filling. The system uses a wet sterilization method with peracetic acid (PAA) or hydrogen peroxide, achieving contact times of less than 8 seconds and leaving residuals below 0.1 ppm. Additionally, the filling environment is maintained at ISO Class 5 cleanliness, using HEPA filtration and positive pressure control, ensuring the highest standards of contamination prevention. Key Components of the Line Pgjdpfxov Ew E Ao Ab Iew The system manages sterilization with a STORK machine, available in two units. In addition, the system also handles product homogenization with a STORK homogenizer (available in two units). These devices ensure consistent product quality, especially for beverages like milk and juices. As a result, the system achieves uniformity in the final product, improving consumer satisfaction. The UHT system (Ultra High Temperature) uses the VarioDose Krones to treat the product at high temperatures, eliminating bacteria and microorganisms without compromising quality.