29,000 litre heatable/coolable vacuum mixer with beam agitator made of V4A stainless steel

K0081

Year of construction: 2012, condition: good (used), Complete dust drying line up to 6t/h including: - Drum Drayer Instalmec CT40 - Sawdust furnace 5MW with gas mixing chamber - Moving floor rawmaterial storage Rc9Tv - Disk screen for big particles - Intermediate bin 6m3 before drum - Rotating valve - Main Fan 160kW Bcsdsvu Dq Ropfx Afhou - Fuel storage and conveyor

Condition: excellent (used), Granulator Frewitt MGV 003 Ex-protected version Material stainless steel Power 5 kW Bcjdpfx Aeq H Rztjfhju stepless mechanical variator mobile, movable on castors Very good condition, straight from production!!!

Condition: used, Used Comessa stainless steel 304 drum dryer/cooler. Drum Ø 2400 x 14000 mm length Drying length: 7000 mm Cooling length: 7000 mm Previous use: drying 30 TPH white sugar Stainless steel feed screw driven by 7.5 kW motor Stainless steel blowing fan 7.5 kW Stainless steel cooling fan 11 kW Stainless steel preheating, drying and cooling batteries Description of the original installation and manufacturer's technical documentation also available. Delivered without: 45 kW shell drive motor/55 kW extraction fan/Steam preheating battery Bjdew Uig Iepfx Afhecu Weight: 21500kg Dimensions: diameter 3.35m x lenght 14m

Condition: excellent (used), Year of construction: 2003, tank capacity: 14,100 l, total width: 3,000 mm, total height: 5,700 mm, overall weight: 2,800 kg, operating temperature: 150 °C, negative pressure: -1 Pa, pressure (max.): 3 bar, Reactor by E.BACHILLER, manufactured in 316 stainless steel, with agitation and jacket. Year 2003. Lower Klopper head with DN50 and DN80 connections. Side connections: DN25 and DN50. Upper Klopper head with manhole, 495 mm diameter. Connections: 5 DN25 flanges, 10 DN50 flanges, DN80, DN100, and DN150. Mounted on 4 support brackets. Vessel pressure: -1/+3 bar Jacket pressure: 10 bar Temperature: 150 ºC Bodpsxnyp Ssfx Afhscu Jacket volume: 340 liters. Agitator motor: 11kW at 1465 rpm.

Condition: used, machine/vehicle number: 11627, Rotor diameter: 220 mm Rotor width: 160 mm Rotor blades: 3 Stator knife: 2 Inlet cross-section approx. 400x400 mm Drive motor: 6.5 kW Bsdpfxowbwuuo Afhocu

Condition: used, tank capacity: 6,510 l, GENERAL Design: suspended Remarks: Several connections have been modified by the previous operator (not listed in TÜV documents); vessel supported on 3 lugs made of Fe (not on 4 lugs as shown in the drawing); heating coil in the cylinder only in the lower section; insulation jacket with sheet metal cutouts and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/cooling: available Insulation: available Power: 5.5 kW Max. permitted operating temperature: 165 °C Max. permitted operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: beam agitator Location: Bremen Technical documentation: Drawing, TÜV documents Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 liters Double jacket volume: 34.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Last used for: Ethanol VESSEL Max. permitted operating temperature: 165 °C Stand type: lugs Number of legs: 3 HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in the top head (DN 600) Outlet: flange DN65 Note: slight residue Bsdpfx Afexqbaqjhecu AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 Volt Current interrupter: Agitator arrangement: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Top wall thickness: 8.0 mm

Condition: used, tank capacity: 10,875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; In some areas, the flanges of the top head were welded on the inside with a stainless steel sheet by the previous operator (in some of these sheets, an opening has been cut – see photos); Manhole diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Standing form: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double-jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double-jacket material: V2A 1.4301 (AISI 304) Product-contact surface material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,200 mm Previous application: Adhesives industry Bcsdpfxjxqa Nwj Afhsu VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in top head Outlet: present Note: minor residues, manhole cover missing Outlet: 100 mm MATERIAL SPECIFICATION Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Agitator arrangement: central in top head Top head wall thickness: 14 mm

Condition: used, tank capacity: 19,600 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Presumably 3 cooling coils around the cylinder; heating connections have been cut off; a former manhole in the lower cylinder area was welded shut by the previous owner; the tank feet were cut off during dismantling and are now loose (some minor dents; see photos) Outer diameter: 2,900 mm Inner diameter: 2,700 mm Total height: 5,000 mm Bedpoxqantefx Afhocu Heating/cooling: available Insulation: available Max. overpressure: 3.0 bar Agitator: beam agitator Mounting type: height-adjustable feet Location: Bremen Nameplate: Vacuum: 0.9 bar Volume: 19,600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Last previous use: dairy VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Base tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top (DN 500) Outlet: available Note: pressure marks on the insulation jacket, outlet end cut off Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Stelzer Bottom bearing: Agitator arrangement: eccentric in the top Agitator equipment: agitator data not legible; motor/gear unit shows signs of corrosion