Used Stirring & mixing equipment for sale (80)

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 313 liters Max. overpressure 3.00 bar top bottom top bottom removable / hinged type standing type rack Heating/cooling jacket Heating/cooling available Volume double jacket 90.0 liters Max. permissible operating overpressure 10.0 bar Temperature control cylinder half-pipe coil Temperature control bottom half-pipe coil Technical data / dimensions Inner diameter 700 mm Cylindrical height 630 mm Overall height 3,050 mm Cggfnj8Ges Equipment manhole / dome handhole Type plate outlet available Remark slight adhesions

Condition: ready for operation (used), General Location Bremen Condition Used Miscellaneous Single-shaft mixer type VM 300, manufacturer Amixon Mixing Technology (formerly Ruberg-Mischtechnik KG), was last used for mixing powder alloys. However, these precision mixers can be used universally for almost all types of dry, moist or suspended solids. The VM 300 mixer has a useful volume of 300 liters and a gross volume of approx. 425 liters. For the purpose of cooling or heating, the device is equipped with a double jacket in the area of the cylinder and the base plate (design parameters: 0.2 bar overpressure, 60°C). The mixer is also equipped with an additional dispersing tool. The apparatus is a batch mixer, which is filled from above and emptied through an opening in the base plate, which is located at the lowest point. The mixing tool is only driven and supported from above. Due to the inclined arrangement of the mixer, the goods are redistributed very effectively. The dispersing tool can also be operated effectively with comparably low filling levels for a maximum bulk density of 3.5 kg/l Net apparatus weight approx. 2000 kg with support frameincluding connection for temperature sensor to determine the product temperatureincluding 1x inlet connection DN 250, 1x venting connection DN 100, 1x outlet flange DN 300 with flap Ø 200including lateral, oval inspection door - gas-tight sealed by means of an O-ringThe VM 300/1685 mixer was built in 2001 and is equipped with ATB motors. The sale does not include controls and electrical cabinets. Ciqblz3Y Tank volume 425 liters Max. permissible operating temperature 60 °C Vertical design Standing feet Number of feet 4 pieces Heating/cooling jacket Heating/cooling available Volume double jacket 17.0 liters Max. permissible operating temperature 60 °C

Condition: ready for operation (used), General Location Bremen Condition factory-new Tank volume 550 liters Max. permissible operating temperature 80 °C Top agitator traverse with hinged cover Design upright Stand form PE base Technical data / dimensions Diameter inside 820 mm Cylindrical height 1.034 mm Total height 1.850 mm Cggfp9Yyy2 Equipment Technical documents Drawing,CE-marking and declaration of conformity,Assembly instructions,Operating instructions Nameplate Equipment Ventilation, disc tap outlet DN50 DIN 11851 Material Condition Surface outside marbled Surface inside high gloss Material product contact V2A 1.4301 (AISI304) Material feet plastic Agitator 1

Condition: ready for operation (used), General Location Bremen Condition factory-new Container Volume 1,023 liters Max. permissible operating temperature 80 °C Design Container Stand form Frame Technical data / dimensions Diameter inside 1,080 mm Cylindrical height 1,000 mm Total height 1,950 mm Equipment Technical documents Drawing,Declaration of incorporation in the sense of the EC Machinery Directive,Assembly instructions Manhole / dome in top, hand hole Type plate Equipment Ventilation, ball valve outlet DN50 DIN 11851 Remarks Frame Fe (galvanized) 0N3Fk Material Condition Surface outside bright rolled IIIc Material in contact with product V2A 1.4301 (AISI304) Agitator 1 power 0,75 KW

Condition: ready for operation (used), General Location Bremen Condition used Ff0Rckbn tank volume 1.100 liters design hanging Heating/cooling jacket Heating/cooling available Temperature control cylinder double jacket Temperature control underbody double jacket Technical data / dimensions Diameter inside 1.040 mm Diameter outside 1.090 mm Cylindrical height 1.200 mm Total height 3.200 mm Equipment Manhole / dome in top (DN 400) Outlet flange DN40 Remarks Manhole cover plated Remarks Former claws were cut off during disassembly and are no longer present; 1 heating connection chipped off; container with heavier buildup last Intended use Adhesive production Material Properties Material in contact with product V4A 1.4429 (AISI316) Material double jacket V2A 1.4301

Condition: ready for operation (used), General Location Bremen Condition used Cjtzy7Aq tank volume 8.000 liters design hanging standing form claws Technical data / dimensions Diameter inside 2.100 mm Cylindrical height 2.500 mm Total height 5.500 mm Wall thickness bottom 6 mm Wall thickness cylinder 6 mm Wall thickness top 8 mm Equipment manhole / dome in the upper bottom Type plate Equipment crane eyes Outlet flange DN100 Remarks light adhesions Remarks 3 claws made of V2A last Intended use Chemistry Material Properties Material in contact with product V2A 1.4541 (AISI304)

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 16,000 liters Design upright Standing form Feet Number of feet 3 pieces Technical data / dimensions Internal diameter 2,480 mm Cylindrical height 3,000 mm Total height 4,900 mm Fhhhsv8D Equipment Technical documentation Drawing Manhole / dome in cylinder, in top plate (DN 500) Type plate Equipment Crane eyes Outlet Flange DN125 Note slight adhesions, dents on cylinder last intended use Water-soluble paint Material properties Material in contact with product V2A 1.4301 (AISI304) Material feet Stainless steel Agitator power 5.5 KW

Condition: ready for operation (used), General Location Outdoor storage Condition Used Container volume 44,000 liters Design upright Standing form Feet Number of feet 6 pieces Technical data / dimensions Internal diameter 3,000 mm Cylindrical height 5,950 mm Total height 8,100 mm Equipment manhole / dome in cylinder Equipment disc tap, spray head, crane eyes Outlet DN50 DIN 11851 Remarks Container with smaller dents; manhole approx. 350 x 450 mm; second identical container can be made available on request if necessary. last intended use Beverage industry Material Finish Surface marbled on the outside Material in contact with the product V2A 1.4301 (AISI304) Material feet Stainless steel Q3Wxh Agitator power 5.0 / 7.8 KW

Condition: ready for operation (used), General Manufacturer Innoweld Location Bremen Condition used Fgdpfs0L Tank volume 2.500 liters Vacuum 1.0 bar Max. Overpressure 3.2 bar Max. permissible operating temperature 200 °C Type of construction hanging Standing form Ring Heating/cooling jacket Heating/cooling available Volume double jacket 180.0 liters Max. permissible operating overpressure 16.0 bar Max. permissible operating vacuum 1.0 bar Max. permissible operating temperature 200 °C Temperature control cylinder half-pipe coil Temperature control bottom half-pipe coil Insulation Insulation available Material of insulation jacket Aluminum Technical data / dimensions Diameter inside 1,590 mm

Condition: ready for operation (used), General condition used tank volume 3.000 liters construction form standing form feet number of feet 3 pieces Heating/cooling jacket Heating/cooling available Temperature control cylinder double jacket Temperature control underbody double jacket Technical data / dimensions Diameter inside 1,400 mm Diameter outside 1,450 mm Cylindrical height 1,650 mm Total height 4,300 mm Equipment manhole / dome in the upper bottom outlet 135 mm Remark slight adhesions Remarks outside steel parts sandblasted and primed; upper bottom also heatable/coolable last Intended use chemistry Material Properties Material in contact with product V4A 1.4571 (AISI316) Cjb7Slou

Condition: ready for operation (used), General Location Bremen Condition used Container volume 3,000 liters Design upright Standing form Feet Number of feet 3 pieces Cgggb29Kkx Heating/cooling jacket Heating/cooling available Temperature control cylinder double jacket Temperature control underbody double jacket Technical data / dimensions Internal diameter 1,400 mm External diameter 1,450 mm Cylindrical height 1,650 mm Total height 3,750 mm Equipment Manhole / dome in the upper base Outlet 140 mm last intended use Chemicals Material Properties Material in contact with product V4A 1.4571 (AISI316) Material double jacket steel Material flanges steel

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 6,000 liters Heating/cooling jacket Heating/cooling available Temperature control cylinder rectangular half-pipe coil Temperature control underbody rectangular half-pipe coil Technical data / dimensions Internal diameter 2,100 mm Cylindrical height 1,500 mm Total height 4,050 mm Wall thickness cylinder 10 mm Cjk2Vuhs Equipment Manhole / dome in top floor Outlet flange DN150 Remarks Tank originally stood on 4 Fe pipe feet, of which only one is still present; heating connections torn or cut off (see photos) last intended use Chemicals Material Properties Material in contact with product V2A 1.4541 (AISI304) Material double jacket V2A 1.4301 (AISI304) Material feet steel Agitator

Condition: ready for operation (used), General Location Bremen Condition used tank volume 6.100 liters design standing form feet height adjustable number of feet 4 pieces Cgggk0Ctdv Technical data / dimensions Diameter inside 1.990 mm Cylindrical height 2.000 mm Total height 2.800 mm Wall thickness bottoms 2.5 mm Wall thickness cylinder 2.5 mm Equipment manhole / dome in cylinder Equipment level indicator (without guarantee) Outlet flange DN50 Remarks Piping inside the vessel (see photos); diameter manhole approx. 400 mm Last use Cip vessel in a brewery Material composition Material in contact with product V2A 1.4541 (AISI304) Material feet stainless steel

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 7,950 liters Specific weight of medium 1.4 (to/m³) Design hanging Stand form claws Fgvlmemh Technical data / dimensions Diameter inside 1.800 mm Cylindrical height 2.660 mm Total height 5.350 mm Wall thickness bottoms 5 mm Wall thickness cylinder 5 mm Equipment Technical documents Drawing manhole / dome in top bottom (DN 500) Type plate Outlet 72 mm Remark slight adhesions Remarks 3 claws made of V2A (partly lined); for one tank (make Sam) no drawing is available, therefore the data (e.g. dimensions) may be slightly different here; for example, this tank has a density of 1.7; due to the different motor/gear unit, it is also slightly lower in total height last Intended use Water varnish

Condition: ready for operation (used), General Location Bremen Condition Used Tank volume 8,000 liters Max. permissible operating temperature 100 °C Specific weight of the medium 1.2 (to/m³) Vertical design Standing shape Feet Number of feet 3 pieces Technical data / dimensions Internal diameter 1,658 mm Cylindrical height 3,270 mm Total height 5,950 mm Wall thickness of base 5 mm Wall thickness of cylinder 5 mm Q3Wun Equipment Technical documents Drawing, TÜV papers Manhole / dome in top plate (DN 500) Type plate Outlet flange DN50 Remarks slight adhesions Remarks 1 container with dent in the cylinder and in the fan cover of the agitator motor

Condition: ready for operation (used), General Location Bremen Condition used tank volume 10.000 liters construction standing form feet height adjustable number of feet 4 pieces Heating/cooling jacket Heating/cooling available Tempering inside Plug-in heater Insulation Insulation available Material insulation jacket stainless steel Technical data / dimensions Diameter inside 2,550 mm Diameter outside 2,680 mm Cylindrical height 2,000 mm Total height 3,850 mm Equipment manhole / dome in the top (DN 500) Type plate Equipment spray head, crane eyes Outlet 60 mm Remark slight adhesions, dents on the insulating jacket Cgggxkt9M9

Condition: ready for operation (used), General Location Bremen Condition used tank volume 10.800 liters design standing form feet number of feet 4 pieces Technical data / dimensions Diameter inside 2.280 mm Cylindrical height 2.000 mm Total height 6.200 mm Year of construction 2002 Cggg0Aosbi Equipment manhole / dome in the top Type plate outlet Flange DN100 Remark slight adhesion last Intended use Chemistry Material composition Material in contact with product V2A 1.4301 (AISI304) Material feet Stainless steel Agitator Manufacturer Agitator Fluid Power 55 KW

Condition: ready for operation (used), General Location Bremen Condition used tank volume 11.000 liters design standing form feet number of feet 4 pieces Technical data / dimensions Diameter inside 2.280 mm Cylindrical height 2.500 mm Total height 4.800 mm Equipment manhole / dome in top bottom (DN 500) Outlet 85 mm Remark slight adhesions Remarks 1 connection in top bottom slightly bent last use Chemistry Q3Wvl Material composition Material in contact with product V2A 1.4301 (AISI304) Material feet stainless steel Agitator Power 30 / 36 KW Speed 980 / 1175 rpm Agitator Dissolver

Condition: ready for operation (used), General Location Bremen Condition used tank volume 6.500 liters design standing form feet height adjustable number of feet 4 pieces Technical data / dimensions diameter inside 2.200 mm cylindrical height 1.500 mm total height 3.750 mm Equipment manhole / dome in the top (DN 500) outlet 50 mm Remarks minor dents possible; calotte screws partly bent; last use aerosol production Bdyvgpjvlhc Material composition Material in contact with product V2A 1.4301 (AISI304) Material feet stainless steel Agitator Power 1.5 KW Speed 57 rpm Angled blade agitator Voltage 220/3

Condition: ready for operation (used), General Manufacturer Kleiser und Lösch Location Bremen Condition used Q3Wsr Tank volume 2.732 liters Max. Overpressure 0.50 bar Max. permissible operating temperature 80 °C Top screwed cover Design upright Stand form Feet height adjustable Number of feet 4 pieces Heating/cooling jacket Heating/cooling available Volume double jacket 51.0 liters Max. permissible operating overpressure 6.0 bar Max. permissible operating temperature 80 °C Temperature control cylinder half-pipe coil Technical data / dimensions Inner diameter 1,690 mm Cylindrical height 970 mm Overall height 2,200 mm Equipment manhole / dome handhole

Condition: ready for operation (used), General Location Bremen Condition used tank volume 16.842 liters design standing form feet height adjustable number of feet 5 pieces Technical data / dimensions Diameter inside 2.800 mm Cylindrical height 2.000 mm Total height 4.550 mm Wall thickness bottoms 3.9 mm Wall thickness cylinder 3.0 mm Equipment manhole / dome in cylinder Type plate outlet available Remark slight adhesions last Intended use Chemistry Cgghc8R00G Material composition Material in contact with product V2A 1.4541 (AISI304) Material feet Stainless steel Agitator Manufacturer Agitator Fluid

Condition: ready for operation (used), General Location Bremen Condition used tank volume 4.500 liters construction standing form feet number of feet 4 pieces Cgggfonn2D Heating/cooling jacket Heating/cooling available Max. permissible operating overpressure 6.0 bar Temperature control cylinder half-pipe coil Temperature control bottom half-pipe coil Technical data / dimensions Inner diameter 1,500 mm Cylindrical height 2,390 mm Overall height 4,550 mm Equipment manhole / dome in cylinder Type plate Equipment crane lugs Outlet 55 mm Remarks slight adhesion Remarks half-pipe cylinder only in lower cylinder area

Condition: ready for operation (used), General Location Bremen Condition used Cggglwwd9Y tank volume 6.779 liters design hanging standing form ring cut off Technical data / dimensions diameter inside 1.800 mm cylindrical height 2.200 mm total height 4.550 mm year of construction 2000 Equipment manhole / dome in top plate Type plate Outlet flange DN100 Remark slight adhesions, manhole cover missing Remarks Support ring made of Fe Last use Chemistry Material Condition Material in contact with product V2A 1.4301 (AISI304) Agitator Manufacturer Agitator Fluid Power 37 KW Speed 114 rpm

Condition: ready for operation (used), General Manufacturer De Dietrich Location Bremen Condition used Vessel volume 7.385 liters Vacuum 1,0 bar Max. Overpressure 6,0 bar Max. permissible operating temperature 200 °C Type of construction hanging Standform Ring Cgggomqwub Heating/cooling jacket Heating/cooling available Volume double jacket 735.0 liters Max. permissible operating overpressure 7.0 bar Max. permissible operating vacuum 1.0 bar Max. permissible operating temperature 200 °C Temperature control cylinder double jacket Temperature control bottom double jacket Technical data / dimensions Inside diameter 2,000 mm Outside diameter 2,100 mm Overall height 4,950 mm Equipment

Condition: ready for operation (used), General Location Bremen Condition used Container volume 7,500 liters Design upright Standing form Feet Number of feet 3 pieces Technical data / dimensions Internal diameter 1,800 mm Cylindrical height 3,000 mm Total height 4,650 mm 2Uxwqe Features Manhole / dome in cylinder Type plate Outlet DN50 DIN 11851 Note slight adhesions last intended use Paint industry Material Properties Material in contact with product V2A 1.4301 (AISI304) Agitator Power 2.2 KW Speed 102 rpm Agitator Bucket agitator Voltage 230/400 Volt