Cantilever rack

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Bodpfs Agvnksx Aktjlp Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Bledpsyldxmofx Aktep Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the machine by week 46. TECHNICAL DETAILS Machining area Cross-section: 20 × 60 to 300 × 450 mm Material feeding Feed cross conveyor: 7 strands Conveyor length: 2.2 m Saw unit Saw: Undercutting swivel miter saw Milling units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical combination support Drilling units: 1 unit Finger cutter: 1 unit Horizontal combination support Drilling units: 1 unit Grooving unit: 1 unit Workpiece handling Beam turning station: fully automatic Foundation and installation Minimum thickness of floor slab: 10 cm Requirement for floor slab: level, adequately reinforced and suitable for anchoring Blodpfx Ae Aayqwoktop Electrical data Voltage: 400/230 V, 3/N/PE Fuses: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed air supply Volume flow: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control system Retrofit: Autumn 2020 by Hundegger Control system: CAN control Previous control system: MIPPS

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 12 mm, overall weight: 8,000 kg, working length: 3,000 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Max. sheet thickness, steel: 12 mm Tensile strength, steel: 450 N/mm² Working length: 3,000 mm Max. feed rate: 88 mm/s Performance data Power: 22 kW Tool weight: 31.5 kg MACHINE DETAILS Bledpfx Aez Nnvbjktsp Power: 22 kW Input voltage: 380 V Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,600 x 2,100 mm Total weight: 8,000 kg External Reference: Zafa - Lot 12

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Blsdpfedy Hm Djx Aktop Dust extraction outlet 100mm. Machine stand

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Bodpfx Akoz Il Rrstslp Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, table width: 350 mm, table length: 850 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between November 16, 2026, and November 26, 2026! The machine’s spindle was recently replaced! TECHNICAL DETAILS Travel distance X-axis: 800 mm Travel distance Y-axis: 500 + 50 mm Travel distance Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table length: 850 mm Table width: 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Dimensions & Weight Bledpfsz Il Nzjx Aktop Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Weight: 10,000 kg EQUIPMENT Chip conveyor KNOLL Paper band filter system KNOLL Zero-point clamping system SCHUNK SDE 138 Tool holders and tools in the tool changer Measuring probe as shown in the pictures Note: A truck with a width of 3,000 mm is required for transport. External reference: Wittner - Lot 11

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) Bjdpfjh Ek Dajx Aktslp - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Bljdpfx Akjz Il Iketop Weight: 120 kg External Reference: Steinbach & Holler - Lot 62

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 4,750 mm, fork length: 1,200 mm, overall weight: 4,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Rated load capacity: 2,000 kg Lifting height: up to 4,750 mm Fork length: up to 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,100 mm Machine weight: 4,000 kg EQUIPMENT Bedpfoz Il H Hox Aktjlp Fork extensions: 2,000 mm External reference: Steinbach & Holler - Lot 48

Condition: new, Year of construction: 2026, functionality: fully functional, Waste Baler BTS-MF75 in stock and available straight away The BTS-MF75 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine size: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (on request) Loading aperture: 700 W x 698 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Bedpfsut Tk Hjx Aktslp Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strap eject for easy removal of bales Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, saw blade diameter: 400 mm, cutting range round steel at 45°: 130 mm, cutting range round steel at 90°: 130 mm, overall weight: 2,500 kg, cutting range square steel at 90°: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16, 2026, and November 26, 2026! The machine has been completely overhauled and repainted! TECHNICAL DETAILS Round material at 90°/45°: 130 mm Square material at 90°: 120 mm Profiles at 90°: 300 × 45 mm Profiles lying at 45°: 220 × 60 mm Profiles standing at 45°: 80 × 120 mm Saw blade: 400 × 4 × 50 mm Saw blade mount: 50/4 × 14/80 mm Saw motor: 3.7/4.5 kW Cutting speed: 1,750/3,500 m/min Saw blade feed: 0–3,700 mm/min Rapid return of saw blade: 4,500 mm/min Bodpez Il Hysfx Aktelp Short-stroke clamping device stroke: 8 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,200 x 2,000 mm Weight: 2,500 kg EQUIPMENT Workpiece clamping with short-stroke clamping device Hand crank for pre-setting Horizontal clamping cylinder at the front Minimum lubrication instead of a coolant mist spray system Feed roller track T3 Rollers of the feed roller track: 60 × 289 mm Starting section of the roller track, length 2,000 mm, with 5 rollers Stand for roller track Mounting bracket Extension of the roller track, length 2,000 mm, with 4 rollers Stop roller, adjustable as a guide for material bars Length measuring device Discharge roller track T3 External Reference: Steinbach & Holler - Lot 39

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positional accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Bjdpfxez Il Hao Aktslp Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 25

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Closing force: 250 tons Year of manufacture: 1987 Injection weight: 470 g Tie bar spacing: 63 x 56 Blodpsfp U Hvefx Aktjp

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected power: 13 kW Bedpfx Akez Il E Aotolp Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 23