MBO K800 6 SKTL - automat

Year of construction: 1987, condition: good (used), functionality: fully functional, Asitrade Singlefacer E-Flute and B-Flute Csdpfx Aotxlv Hoddsaa Year: 1987 - completely overhauled in 2019 Unwinder: 6-stations Max. working width: 1410 mm Max. speed: 150 m/min Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Casdpfx Ajwpfv Aoddea Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2002, The Man Roland 705-P2 LV is a high-performance sheetfed offset press manufactured in 2002, designed for professional print production. This model features advanced automation, including Autoplate and PPL (Power Plate Loading) for efficient plate handling, as well as CCI (Color Contamination Check) to ensure consistent print quality. With a maximum sheet size of approximately 104 x 74 cm (40 x 29 inches) or 1020 x 715 mm, the press is well-suited for a wide range of print applications. It has accumulated around 206 million impressions and is currently operational in a printshop located in Germany. Caedpfxsxuz Trs Addja Format: 740 x 1040 mm Equipment: Rolandmatic damping with circulation and refrigeration PPL (Power Plate Loading semi automatic) RCI 2 with CCI (Color management) Impression Cylinders, Blankets and Rollers Washers Inking unit temperature control Coating Unit with Extended Delivery Air Glide IR Dryer

Condition: ready for operation (used), Year of construction: 2007, MBO K 800 2/6 SKTL Automatic folding rollers + pockets, year of construction with 6 pockets, upstream folding rollers + knife shafts – prepared gluing unit Pallet feeder FP 120 K-section with 2 folding swords and pneumatic lying pocket Vertical sheet delivery SBAP 46 ME Codjkkwc Uepfx Addsaa Compressor Documentation

Condition: used, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine SMIPACK FP 560a Baujahr / Year 2014 Schweißrahmen 560 x 430mm Folienbreite / Foil width max 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Csdpfjw Ngmnex Addjaa Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm Caedpfx Adovy Aipedja

Condition: used, Year of construction: 2009, Folding machine MBO K 800.2/6 S-KTL Year: 2009 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Excluding pump - Machine was connected to a centralised air system Folding unit MBO K 800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold Cedpfewaxqujx Addoaa - Second cross fold to the left Delivery Palamides Alpha 700 Year: 2010 - Vertical stack delivery with pressing Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: new, Capacity: 63 m3/h Standard features New pump Casdpfx Ajqrp Uweddoa Specifications

Condition: good (used), Year of construction: 2007, stream feeder single-side lamination hot lamination using thermofoil or dispersion glue max speed when applying water dispersion glue 50m/min Cedpfx Aowl Hw Heddsaa max speed hot lamination 70m/min material 80 - 600 g/m2 delivery

Condition: excellent (used), Year of construction: 2014, Fully automatic, four-clamp perfect binder HORIZON BQ-470 PUR This versatile perfect binder is ideal for short and medium runs, as well as single-copy production. With intuitive operation and flexible application options, the Horizon BQ-470 is the perfect choice for your bindery. Key features: - Intuitive operation via a 10.4-inch color touchscreen enables high-quality binding production, even by less experienced operators - Advanced rotary feeding system with vacuum support provides faster production and handles a wide range of covers without leaving marks - Automatically adjustable creasing position (4 lines) ensures professional binding with a sharp, square spine Specification: - Maximum book block size: 320 x 320 mm, minimum: 145 x 105 mm - Book thickness: from 1 to 65 mm - Cover size: max. 320 x 660 mm, min. 135 x 225 mm - Cover weight: 81.4–302.4 g/m² (offset paper), 104.7–348.9 g/m² (coated paper) - Output: up to 1,000 cycles/h (PUR) Cjdpfxexv Ai Rs Addjaa The machine has undergone a complete overhaul and is ready for installation.