Röhm compact clamp size 4

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Control: MANUAL PLUS 4110 MACHINE DETAILS Electrical Supply Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Performance Data Power: 24 kVA Kledpfx Adjx Uz Edswel Rated current: 35 A Fuse rating: 50 A Operating hours: 32,503 h

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. Klodjx E Dncepfx Adwol - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F876E01576L, Year of construction: 2013, operating hours: 16,860 h, load capacity: 12,000 kg, lifting height: 5,250 mm, fork length: 3,250 mm, fork width: 2,370 mm, empty load weight: 16,350 kg, TECHNICAL DETAILS Lifting capacity: 12,000 kg Lifting height: 5,250 mm Clearance height: 4,500 mm Fork length: 3,250 mm Maximum fork width: 2,370 mm Minimum fork width: 710 mm MACHINE DETAILS Fuel type: Diesel Number of wheels: 6 Attachment: Sideshift, fork positioner Dimensions & Weight Dimensions (L x W x H): 4,350 x 2,500 x 4,500 mm Unladen weight: 16,350 kg Kljdpfx Adex Tqanowsl Operating hours: 16,860 h EQUIPMENT Pneumatic tyres Full cab Work lights License plate Heater Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516216E01234, Year of construction: 2014, operating hours: 5,586 h, load capacity: 2,000 kg, lifting height: 3,250 mm, free lift: 1,640 mm, fork length: 1,590 mm, fork width: 890 mm, TECHNICAL DETAILS Lifting capacity: 2,000 kg Lifting height: 3,250 mm Free lift: 1,640 mm Fork length: 1,590 mm Maximum fork width: 890 mm Minimum fork width: 370 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,051 mm x 1,149 mm x 2,160 mm Weight: 3,448 kg Number of wheels: 4 Drive: Electric Battery type: 625 Ah, 48 V Kjdpfx Asx Tp T Hodwell Battery test result: 52% Year of battery manufacture: 2017 Operating hours: 5,586 h EQUIPMENT Fork adjustment Side shift Work lights Free lift

Condition: used, thickness of jaw 160 mm clamping capacity 24 kN weight of the machine ca. 31 kg mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 Kleded Ih N Repfx Adwel including turntable with graduation

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine, year of manufacture 2025! TECHNICAL DETAILS Shaft diameter: 50 mm Roller diameter: 155 mm Capacity round diameter: 50 mm Shaft speed: 11 rpm Number of rollers: 3 pcs. MACHINE DETAILS Ksdpfx Aox Tp N Uodwoll Control: Conventional Power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Net weight: 450 kg Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, table width: 550 mm, table length: 300 mm, stroke length: 180 mm, pressing force: 28 t, empty load weight: 800 kg, Unused band bending machine, year of manufacture 2025! TECHNICAL DETAILS Capacity: 28 t Max. stroke: 180 mm Table width: 550 mm Table length: 300 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Net weight: 800 kg Transport packages: 1 piece Operating hours: 0 Kodpfex Tp E Ajx Adwell EQUIPMENT Documentation CE marking CE certificate

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Kodpfx Aoyam D Ujdwjll Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, throat depth: 1,100 mm, pressing force: 100 t, table width: 300 mm, table length: 1,500 mm, stroke length: 380 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 100 t Max. stroke: 380 mm Throat depth: 1,100 mm Frame gap: 100 mm Height adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Number of columns: 2 MACHINE DETAILS Motor power: 3.0 kW Dimensions & Weight Kedsx Tp Abopfx Adwjll Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 EQUIPMENT Movable press cylinder Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 60 t, stroke length: 380 mm, table width: 260 mm, table length: 1,000 mm, throat depth: 750 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 60 t Max. stroke: 380 mm Height adjustment: 750 mm Throat depth: 750 mm Adjustment length: 100 mm Table width: 260 mm Table length: 1,000 mm Kjdpjx Tpy Tofx Adwjll Number of columns: 2 MACHINE DETAILS Motor power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 2,200 mm Net weight: 540 kg Transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Klsdpfx Adoyab Egewjl Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Gantry loading system LG-10AI

Condition: ready for operation (used), Year of construction: 2025, operating hours: 57 h, functionality: fully functional, machine/vehicle number: 24111638, overall weight: 11,600 kg, cutting height (max.): 940 mm, table width: 1,050 mm, table length: 6,000 mm, Equipment: CE marking, Band saw from 2025 with only 57 operating hours! Sale due to business closure. TECHNICAL DETAILS Max. cutting height: 940 mm Table length: 6,000 mm Table width: 1,050 mm Saw orientation: Horizontal Kledsx Tpx Nepfx Adwel MACHINE DETAILS Weight: 11,600 kg Protection: 100 A Total power: 51 kW Main motor power: 30 kW Operating hours: 57 hours EQUIPMENT Documentation CE marking CE certificate

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AB/226310, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, empty load weight: 1,310 kg, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,300 x 1,880 x 2,350 mm Unladen weight: 1,310 kg Kledpfx Adjx Tpv Iowel

Condition: excellent (used), Year of construction: 2015, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: NRX20151106, Machinetype: Chucking Automatic Lathe - Multi Spindle Make: DMG MORI Type: NRX 2000 MC New in: 2015 Control: CNC Location: North Rhine-Westphalia Origin: Japan Term of delivery: to be agreed Quotation: ex site Description: CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 1,500h Spindle-hours. Technical details/ additionals / accessories Text Dimension Unit number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Kljdpownyi Iofx Adwsl Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 spindle bearing diameter - mm spindle bore - mm max. bar capacity - mm usable bar diameter - mm chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, stack height: 560 mm, working height: 920 mm, TECHNICAL DETAILS Max. cutting length: 2,200 mm Max. cutting width: 4,300 mm Lifting table width: 2,200 mm Working height: 920 mm Saw blade protrusion: 110 mm Program fence speed: 90 m/min Saw carriage speed: 130 m/min Max. stack height without pit: 560 mm Max. stack weight: 4 t MACHINE DETAILS Main saw motor: 13.5 kW Scoring unit motor: 2.2 kW Average air consumption: 210 Nl/min Dimensions: 5,364 x 9,963 x 3,636 mm Kljdjx Tptmjpfx Adwol Transport packages: 8 pcs.