Used UHT Milk Preparation Room Tetra Pak 4000 L-h

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Ncjdpfsyuxq Aox Advop Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 Ncodpfeya Nf Isx Advsp V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: not inspected (used), functionality: unexamined, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Battery capacity: 625 Ah Ncjdeytpqwspfx Advop Battery condition: very good, measured at 51.76 V Battery type: 5PzS625 Dimensions & Weight Dimensions (L x W x H): 83 x 63 x 63 cm Weight: 1,500 kg EQUIPMENT Battery from former Linde service Last service valid until 10/2026 All dimensions are approximate. No liability is accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY upon receipt of email payment confirmation! Collection WITHOUT prior notification Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be removed on request. In case of delayed collection, a storage fee of €20 per machine per day will apply (payment must be made before collection).

Condition: not inspected (used), functionality: unexamined, battery capacity: 750 Ah, battery voltage: 48 V, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS 750 Measured battery output: 51.23 V Dimensions & Weight Dimensions (L x W x H): 83 cm x 73 cm x 63 cm Weight: 1,000 kg FEATURES Battery from former Still service inventory All dimensions are rounded values. No liability is accepted for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 tons possible on site using a large forklift at your own risk. Collection ONLY with email payment confirmation! Nodpoytpp Hjfx Advjcp Collection WITHOUT prior appointment Monday to Friday, 7:00 a.m. – 4:30 p.m. An excessive mast height can be dismantled for transport upon request. If collection is not made within the specified period, a storage fee of €20 per machine per day will be charged (payment due before collection).

Condition: used, Year of construction: 2012, operating hours: 20,233 h, Used Tetra Pak Cap Applicator 30/Flex for Helicap23 2012 Ncodpfjvgufpsx Advsp The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a capping machine designed and manufactured by Tetra Pak® in 2012. This machine is specifically designed for applying plastic screw caps onto containers, ensuring secure sealing and efficient production. With a speed of 9600 bottles per hour (BPH), it offers a high-capacity solution for the packaging industry. Specifications: Manufacturer: Tetra Pak® Model: 30 Flex For Helicap 23 Year: 2012 Speed: 9600 BPH This capping machine in suitable for 1000 slim format Cap Type and Rotation Direction: The capping machine is compatible with plastic screw caps, providing a reliable closure mechanism. The rotation direction of the machine is clockwise, ensuring proper application of the caps onto the containers. Current State and Safety Features: Currently, the Tetra Pak Cap Applicator 30/Flex for Helicap23 is in storage. It is equipped with safety features to ensure the well-being of operators and maintain a safe working environment. Manuals and Machine Hours: Accompanying the machine are the necessary manuals, which provide instructions for its operation, maintenance, and troubleshooting. These resources facilitate efficient usage and upkeep of the capping machine. As for its usage history, the machine has been operated for approximately 20,233 hours. Electrical Data: The machine requires an electrical supply of V: 400, kW: 6.7, and operates at a frequency of 60 Hz. These specifications ensure the machine’s optimal performance and power consumption within the specified parameters. Conclusion The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a reliable capping machine manufactured by Tetra Pak® in 2012. With its capability to apply plastic screw caps at a speed of 9600 BPH, it offers a high-capacity solution for efficient packaging processes. Equipped with safety features and accompanied by manuals, this capping machine is designed to provide secure sealing and consistent performance, making it a valuable asset for the packaging industry.

Condition: not inspected (used), functionality: unexamined, Year of construction: 2018, machine/vehicle number: 996294, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 x 630 x 630 mm Weight: 1,500 kg Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5PzS625 Battery performance: measured at 51.38 V EQUIPMENT Battery from former Linde service All dimensions are rounded figures. No guarantee is given for typographical or measurement errors. COLLECTION CONDITIONS Nodsytpn Aopfx Advscp Side loading up to 5 t possible with large forklift on site, at buyer’s own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday, 7:00–16:30. If the mast is too high for transport, removal can be arranged on request. In case of late collection, a storage fee of €20 per machine per day will apply (payment due before pickup).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2021, machine/vehicle number: 053423392, battery capacity: 930 Ah, overall weight: 2,178 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery: 80 V 930 A Nominal energy: 70.7 kWh Battery condition: very good, measured at 83.39 V Ncodpfxeytpnpj Advop Dimensions & Weight Dimensions (L x W x H): 102 x 100 x 80 cm Weight: 2,178 kg EQUIPMENT Battery from a former Linde service unit All measurements are approximations. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT prior notice Monday to Friday 7:00 am–4:30 pm. An overly high mast can be dismantled for transport upon request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Njdpfxodyl H Nj Advocp Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: CT1133L69106, Year of construction: 2022, operating hours: 382 h, load capacity: 1,500 kg, lifting height: 150 mm, fuel type: electric, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 150 mm Overall height: 1,300 mm MACHINE DETAILS Drive type: Electric Battery: 48 V 20 Ah Operating hours: 382 h EQUIPMENT Former Linde full-service unit All dimensions are approximate values. No liability is accepted for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at your own risk. Njdpfx Asytpkksdvscp Collection ONLY with email confirmation of payment! Collection WITHOUT registration Monday to Friday 7:00–16:30. A mast that is too high can be dismantled for transport upon request. If collection is not made within the agreed period, a storage fee of €20 per machine per day applies (additional payment must be made before collection).

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included Nedpfx Asyuyluodvecp 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: used, Year of construction: 2008, machine/vehicle number: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/hThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. Since it combines a UHT sterilization system with a high-pressure homogenizer, it delivers optimal processing for various food and beverage applications. Moreover, its design allows easy integration into existing production lines, making it a practical choice for manufacturers.General FeaturesThis system operates at a capacity of 12,000 liters per hour (l/h), providing both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, ensuring a balance between proven reliability and advanced engineering. Furthermore, the system’s robust construction guarantees long-term durability, reducing the need for frequent maintenance.Tetra Pak Steritube UHT SterilizerThe Tetra Pak Steritube UHT sterilization unit applies high temperatures to ensure the microbiological stability of liquid products. Because it features a controlled heating system, it keeps the sterilization temperature between 95°C and 138°C, depending on production requirements. In addition, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial stages and 30, 45, 60 seconds for advanced stages, allowing precise thermal treatment control.To optimize heat transfer, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an inlet temperature of 5°C and an outlet temperature between 85°C and 95°C, which provides controlled cooling before further processing. Another key advantage is that its design allows seamless integration with homogenization systems, CIP (Cleaning-in-Place) units, and aseptic packaging lines.Tetra Pak Alex 30 HomogenizerThe Tetra Pak Alex 30 homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Because it processes between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products.Additionally, the system features cone valves and pistons made of stainless steel or solid ceramic, ensuring durability and resistance to wear. It also includes grooved and V-type seals, which provide effective sealing and reduce maintenance needs. Since the homogenization process occurs in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals.Moreover, an ABB M3BP315SMB 4 motor powers the unit with 132 kW output, operating at 380V and 50 Hz, which guarantees reliability and high performance. At the same time, a 7.5V DC thermistor monitors the operating temperature to prevent potential malfunctions. For enhanced safety, the system includes a 24V DC door safety lock and a crankshaft speed sensor to prevent overloads.ConclusionThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h offers an efficient solution for thermal processing and homogenization of liquid food products. Thanks to its high performance and reliable construction, manufacturers can optimize their... Ncjdpfsv Di Itsx Advjp

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 3005, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,870 mm, table length: 3,756 mm, table width: 1,892 mm, Equipment: CE marking, TECHNICAL DETAILS Working area X-axis: 3,700 mm Working area Y-axis: 1,870 mm Table length: 3,756 mm Table width: 1,892 mm Tool clamping system: HSK-F63 Number of tool changer positions: 18 pcs. MACHINE DETAILS Drilling head: F20R Number of drilling spindles: 8 vertical, 12 horizontal System/Software: SCM Maestro Dimensions & Weight Dimensions (L x W x H): 6,100 mm x 2,600 mm x 2,450 mm Machine weight: 4,160 kg Ncsdpfxeyuyf Uj Advsp EQUIPMENT Worktable with 2 vacuum zones User manual FAST18 18-position tool changer (18/22XX) Electrical schematics CE marking CE certificate Drilling tools Bumper Vacuum pump (250/300 M3/H 50/60 Hz) OF0438 MAESTRO ACTIVE HUMAN-MACHINE INTERFACE SOFTWARE (HMI) OF0429 SCM DIGITAL SOLUTIONS: MAESTRO CONNECT 52.52.20 MAESTRO CONNECT; complete hardware preset for IoT platform 52.52.25 MAESTRO CONNECT; annual membership (validity unclear) OF0422 MAESTRO CNC programming software

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Number of machining units: 10 1st unit: Pre-milling unit Tools included Ncedpfx Adeyuyfzjvjp 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough trimming unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old The Vat: Ncsdpfjwg Elljx Advsp - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure - 100 liters - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Control: - Digital milk temperature display - PID controller / thermostat - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm Ncsdjyuya Ejpfx Advsp MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016