Used extraction systems for sale (77)

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. Todpfxjxxalne Abtsb The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Coral, Dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm Tsdpfjrw A U Iex Abtjb -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: used, Coolant Filtration Unit,Coolant treatment unit, Industrial Liquid Filter System, LOSMA Spring F3, Used Machine Manufacturer: Tjdjzgh S Sspfx Abtsb LOSMA S.p.A. (Curno, Italy) Model: SPRING F3 Overall Dimensions: Width: 2050 mm Depth: 1020 mm Height: 1350 mm Technical Specifications: Manufacturer (Main Unit): LOSMA S.p.A. (Curno, Italy) Series / Model: SPRING F3 Year of Manufacture: 2005 Serial Number: 0001 Control Panel Manufacturer: effegi impianti s.r.l. (Industrial Electrical Distribution & Automation) Power Supply: 380 V, Three-phase Maximum Current: 16 A Control Voltage (Auxiliary): 24 Vac / 24 Vdc Protection Rating: IP65 (Dust-tight and protected against water jets) Standard: CEI 17-13/1

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² HEPA filter – 40 m² Tedpfx Aoy R Aldjbteb The device is in excellent technical condition – like new. Stock number: 1134

Condition: like new (used), Year of construction: 2015, Suction capacity without/with dust bag: 1800/1520 m³/h Spindle speed: 2800 rpm Tedozvm I Dspfx Abtjb Drive motor: 400 V, 0.75 kW

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan Tedpfx Aboytgrxstjb -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Tsdpfxszq A Ezs Abtjb Fan with a power of 4 kW Year of manufacture: 2021

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan Quantity: 1 piece available -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg Tsdpfsy R S E Hjx Abtjb

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Note: A filter unit only, without a suction fan, can be supplied for an additional charge. -Dimensions: 1840/1475/H2670 mm Tedpfszukp Ajx Abtob -Weight: 689 kg

Condition: used, Radial fan with an aluminum cast housing, filter fan Motor power: 1.8 kW Mains connection: 380 volts, 50 Hz Tsdpfsztrv Isx Abteb Weight: approx. 30 kg

Condition: ready for operation (used), Awatech electrostatic system Dimensions approximately 140x60x60cm Todpozwl Dyefx Abtjb The system was operational until it was dismantled. No further information is available; however, the price is very attractive.

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems 5 units with pre-filter, 2 units with turbine only The systems are sold as is, see pictures. The systems were fully functional until dismantling. Tsdpfx Aezwlvcebteb The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). It can be used on all types of machine tools and in all machining processes. The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. 20 x LTA AC3001 R, production years 2004-2011. Todpfxozv Ttaj Abtjb

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Tedpfewnprxex Abtjb Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: excellent (used), Volume flow 3000 Tedeilug Sepfx Abtjb Pressure 3400 Pa Filter 30 m2 Spindle speeds 2850

Condition: used, Radial fan KEMPER for extraction or ventilation, type 37N290/0J1 Device No.: 1.8011 Art. No.: 853.103 Year of manufacture: approx. 1990 Air volume flow rate: 1700 m3/h Intake pipe: internal diameter 150 mm Exhaust pipe: internal diameter 150 mm Tjdpfx Abezpbrwjtsb Motor speed: 2800 rpm Motor power: 0.75 kW Power connection: 400 Volts, 50 Hz - Housing made of aluminum casting - Impeller made of aluminum casting - very robust design Space requirement L x W x H: 450 x 420 x 400 mm Weight: 20 kg in good condition Ideal for welding fume extraction 2 units available, price per unit

Condition: good (used), Year of construction: 2014, functionality: fully functional, Intake temperature: 20° Density at the intake manifold: 1.2 kg/m³ Volumetric flow rate: 8.3 m³/min Engine speed: 2,882 rpm Tedozn Rfkspfx Abteb

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Model AS.7 Tedjzdgawepfx Abtob Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications.

Condition: used, Approximately 10 used filter and extraction systems from the renowned Italian manufacturer LOSMA are available for sale. These include various models and designs. The systems are used to purify exhaust air from machine tools and to separate oil mist, micro-mist, and vapors that are generated during machining processes using coolants. They are suitable, for example, for lathes, milling machines, grinding machines, and other machine tools. A total of approximately 10 LOSMA filter systems are available. Models, year of manufacture, technical specifications, and condition may vary depending on the unit. We will gladly provide further images, nameplates, and technical data for each filter upon request. Individual sales as well as the purchase of multiple units or the entire package are possible after consultation. An on-site inspection and testing can be arranged. The price depends on the model, condition, and quantity purchased. We look forward to receiving your inquiry. All information is provided to the best of our knowledge. Errors and prior sale are reserved. Tsdpsztbbgjfx Abtjb

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Technical Data: Tedpox Upd Uefx Abtob - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation - single and multi-station extraction - volumetric flow approx. 5,150 m³/h - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg

Condition: used, Radial fan, fan, Dahlander electric motor, three-phase motor with 2 speeds, 1.6 kW + 6 kW, BLECHER type 132 S4 / 2 For exhaust, cooling, or ventilation Fan impeller diameter: Ø 400 mm Fan impeller width: 175 mm Todozinyhjpfx Abtob Shaft diameter, motor shaft: Ø 38 mm Motor design: Dahlander star / double star Motor speed: 1440 / 2870 rpm Number of poles: 8 / 4 Motor power: 1.6 / 6 kW Mains connection: 400 volts, 50 Hz - Dahlander three-phase motor with 2 speeds - Fan impeller made of metal - Fan cover made of metal, Ø 465 mm - Electric motor with standard foot flange, mounting holes Ø 11.5 / hole spacing 215 x 140 mm Space requirement L x W x H: 570 x 465 x 465 mm Weight: 57 kg Good condition 2 units available, price per unit.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 0.14 kW (0.19 HP), input voltage: 230 V, type of input current: AC, volume flow: 1,890 m³/h, filter area: 7.9 m², noise level: 65 dB, actuation type: electric, total height: 575 mm, total length: 600 mm, total width: 590 mm, overall weight: 55 kg, Equipment: CE marking, documentation/manual, LTA electrostatic extraction system 2 units, left and right intake The intake nozzle can be screwed on as needed; currently, there are none, as it was previously mounted directly on the housing wall. Tjdpfozqttcjx Abtob In very good, fully functional condition; naturally, it has been completely cleaned. Available for immediate delivery.

Condition: good (used), Year of construction: 1998, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system -Manufacturer: BTR Environmental, Unicell cartridge dust extraction system Tjdpeu Uww Sefx Abtjb -Type: C16-2K7 -Extraction fan power: 3.0 kW -Inlet: Ø 220 mm -Individual components: see photos -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg

Condition: good (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm Tsdpfoy Nnkvsx Abtsb -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

Condition: good (used), Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW Tjdpfx Aoiz Udwsbtjb -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg