Spiral mixer

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Pgjdpfx Aiez Tf Enjrou Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping Podpfjx Ew Dqsx Airsgu - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! Pgodpez Tf D Rjfx Aireu TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system is available immediately! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible print cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90% RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90% RH, non-condensing Installation: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Pgodpfxjz Tf D Do Airju Operating weight: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lift system Interchangeable print cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cord Ethernet cable USB stick Operating manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: good (used), Year of construction: 2019, operating hours: 5,800 h, functionality: fully functional, Timesavers 42 Series WRBW (Belt Sander / Rotary Brushes / Belt Sander) Year of manufacture: 2019 Only 5,800 operating hours! Includes an ATEX exhaust system from Ulmatec. Pjdpoz A Ucmefx Airegu Inspection is also possible.

Condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS General Information Manufacturer: Baykal Type of Machine: Hydraulic Plate Shear Model: HNC 8100/6 Working Area Working Width: 8,100 mm Sheet Thickness: max. 6 mm EQUIPMENT Motorized Back Gauge Automatic Shear Gap Adjustment Automatic Angle Adjustment Sheet Support Device Pgjdpjz R Dwkefx Airou

Condition: excellent (used), Year of construction: 2016, TECHNICAL DETAILS Control System CNC control: FANUC Professional 5 Axes and Travel Ranges X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 500 mm C-axis: 360°, continuous rotation A-axis: 150° (+30° / 120°) C-axis measuring system: Rotary encoder A-axis measuring system: Rotary encoder Feed Rate and Rapid Traverse Feed rate X-axis: 32 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A-axis: 18 m/min Rapid traverse C-axis: 18 m/min Work Table and Workpiece Table dimensions: 500 mm Maximum workpiece size: 650 × 500 mm Workpiece weight: max. 350 kg Spindle Spindle speed: max. 14,000 rpm Tool System Tool holder: HSK-A63 Tool magazine: 323 positions Tool changer: Double gripper Tool diameter: max. 70 mm Tool diameter with adjacent occupied positions: max. 140 mm Tool length: max. 300 mm Tool weight: max. 8 kg Operating Hours Total operating time: 63,813 h Spindle running time: 30,592 h Machine Dimensions and Weight Length: 3,550 mm Width: 2,900 mm Height: 3,200 mm Pgsdps Aayfhjfx Airou Machine weight: 15,700 kg EQUIPMENT Electronic handwheel Chip conveyor Measuring probe

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm Psdora Rrhopfx Airsgu x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156 Podpfx Aez S Nw Eeirsgu

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Psdpfoz S Nwxsx Airjgu Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Pedpfxjihp U Ds Airjgu Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm MACHINE DETAILS Pgodpfjz S Nwlsx Airsu Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Pgodpfx Aijz S Nwfereu Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 20 [kW] - Spindle speeds : 24000 [rpm] - Number of spindle hours : 4877 [h] LINEAR AXES - Travels on X/Y/Z axes : 700/420/380 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 25 - Tool exchange time : 0.9 [sec] Pedpexcqadofx Airjgu TABLE - Table dimensions : 840/420 [mm] - Maximum weight upon table : 400 [kg] - Distance table / spindle nose (min./max.) : 200-580 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 16 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1650/2950 [mm] - Machine height : 2550 [mm] - Machine weight : 3400 [kg] MACHINE HOURS - Number of hours under power : 14493 [h] - Number of working hours : 5307 [h] EQUIPMENT - CNC : Siemens 840D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Tool probe : Renishaw OTS - Workpiece probe : Renishaw OMP40-2 - Electric transformer

Condition: used, machine/vehicle number: W41153L00104, Year of construction: 2022, operating hours: 3,050 h, load capacity: 2,000 kg, lifting height: 150 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 150 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 166 Ah Battery voltage in idle state: 25.3 V Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,300 mm Own weight: 900 kg Operating hours: 3,050 h EQUIPMENT Folding platform Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Pjdpfez S Nv Ujx Airjgu Lot number: 397