Quick-change toolholder,lathes PARAT

WD40

Condition: new, Year of construction: 2026, functionality: fully functional, empty load weight: 654 kg, construction width: 1,500 mm, sweeping width: 1,250 mm, Sweeper Guodpjzt Eqlsfx Ahajf Condition: New Technical Condition: New Description: Working width: 125cm, drive type: self-propelled via two hydraulic wheel drives with a powerful gerotor pump and drive shaft d32mm / collection container with rubber scraper blade, emptying mechanically via cable pull / attachment via forklift adapter: tine cross-section 150x60 mm with height adjustment / 3rd support wheel for uniform ground tracking / paint finish of the sweeper: RAL 2009 / paint finish of the attachment components: RAL 7024 / side sweeping brush on the right, d800mm, incl. SideControl hydraulically controlled via the self-propelled/wheel drive / water spray system complete for integrated water tank (85l) with 12-volt pressure pump and on/off switch / spray nozzle for side sweeping brush.

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Gedsx S Rcmepfx Ahaeuf

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: LP-S08-142F, overall weight: 2,500 kg, nominal power: 5 kW (6.80 HP), Equipment: documentation/manual, Filling and sealing machine for pre-made pouches Speed: 10 - 30 pouches/min, the speed may vary depending on the pouch volume. Pouch types: Pre-made stand-up pouches, flat pouches Pouch size: Width 180 - 400mm, pouch length 120 - 500mm Sealing: Sealing with constant heat (special sealing bar) Pouch magazine: Stack magazine Adjustment of pouch width: Gripper sets can be adjusted individually via a motor The machine is offered without a dosing system. Godpeyg Hmcjfx Ahasuf A labeling system with a thermal transfer printer can be integrated, but is not included in the offer. See separate offer (€7,400). Video available upon request.

Condition: used, Gear motor electric motor Guodpfx Ahsckvdhsaef -Speed: 230 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 510/150/H210 mm -Weight: 26 kg

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Guedpfxjyi Amws Ahaef Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: Godpfx Ahexpwfgoajuf - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Gjdpfx Ajyg I Nfshasuf Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions Gjdpfxjyz Dg Dj Ahasuf

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet Guodpewwwr Eefx Ahaef

Condition: used, Technical details: x-travel: 880 mm y-travel: 300 mm z-travel: 900 mm w-axis: 60 mm spindle head swivable left - right: 60 ° table surface area: 880 x 300 mm machine weight approx.: 1200 kg dimension machine xH: 1,3 x 1,4 x 1,9 m incl. accessories Gsdou Ndfhepfx Ahaouf *