Silo semitrailer

Zellradschleuse Eriksen TWBR22-N

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALU (aluminum) construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc Brake 22.5": Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake lining wear indicator (BVA) for display in the tractor unit (without tractor head equipment), 1st and 3rd axle separately liftable with drive-off aid (without tractor head equipment), 3rd axle additionally with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, brand as per manufacturer’s choice, Alcoa aluminum rims DuraBright 11.75x22.5 ET 120, king pin bolted into a 10 mm thick plate Landing Legs: Aluminum drop landing legs, 2 x 10 tons support load, pivot feet used for air suspension Brake System: According to E.G. standard, dual-circuit brake system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-actuated parking brake active on two axles, operated at the rear, aluminum air reservoir system, premium modulator Electrical System: According to STVZO guidelines, with 2 LED five-chamber taillights type Aspöck Europoint LED integrated in ALU rear end, 24 V system with 1x 5-pin & 2x 7-pin sockets, with LED side marker lights, 2 separate LED work lights at the rear, 2 LED work lights at 1st landing leg height, 1 inside left front LED work light, operable from outside Body/Bodywork "Fully Welded Inside Construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, fully welded with lower and upper flange, inside fully welded plank profiles, floor as moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m2, crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, special angled ALU corner profiles, smooth flat rear wall with 2 ALU swing doors 50/30 mm thick, 4 locking rods with welded-in ALU rear frame mounted in Teflon and stainless steel bearings, continuous ALU wall suspended from reinforced ALU top rail with "Kevlar tarpaulin" for complete emptying, lateral brush seals and additional Kevlar side tarpaulin, integrated discharge funnel with hinged floor closure flap, operable from outside left rear, inspection window rear left, 1 sample slide per rear door (2 pcs.), service door front left Hydraulic System: "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 670 PE-HD sliding blocks, approx. 6 mm floor thickness, hydraulic stroke approx. 200 mm, fixed end at front wall, separate hydraulic line connection under the vehicle with fixed halves, line size NW 21, fixed halves with yet to be specified size and design, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electric operation rear left with cable remote in lockable waterproof box Accessories: PVC mudguards with rubber splash guards, ALU spare wheel holder, foldable side ALU underrun protection, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m ALU ladder, roll tarp 680 gr./m2 quality with rolling tarp system incl. side ... Fpjdefakkcspfx Aa Njg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, for pelletizing softwood wood chips Capacity: 180 – 350 kg/h Pellet diameter to European standard ISO 17225-2: 6 mm Material moisture: 12 – 14 % Maximum input size: 30 x 30 x 5 mm Raw material intake and size reduction Material tank: 2 m³, 2.2 kW Fodey Hl Efepfx Aa Nepg Shredder RTZ-18: 18.5 kW Buffering and granulation Buffer tank: 1 m³ Sawdust conveyor (screw conveyor): 2.2 kW Additional dosing: 0.55 kW Water dosing WALW-22 pellet granulator: 22 kW Transport and packaging Pellet screen: 0.18 kW Belt conveyor: 0.75 kW Weighing and packaging machine with feed tank and cooling: 1.1 kW Control cabinet

Condition: used, maximum load weight: 29,278 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 10/2026, loading space length: 10,030 mm, loading space width: 2,450 mm, loading space height: 3,800 mm, loading space volume: 61 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Knapen K200 moving floor 61m³ with rotary airlock * SAF axles with air suspension and disc brakes * 1st axle as lift axle * Alcoa aluminum rims * 385/65 R22.5 tires * Roof roll tarp * Grain slides in left and right rear doors * Work platform on front wall Fjdpfex Hb N Hjx Aa Njpg * 4x work lights * Remote control * Jost landing legs * Stainless steel toolboxes * 6 mm floor * Heitling rotary airlock For further information, please do not hesitate to contact us.

Condition: new, empty load weight: 6,550 kg, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,613 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 1,40,000 mm, suspension: air, tire size: 385/65 R 22,5, wheelbase: 6,250 mm, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Axle manufacturer SAF, aluminum chassis, color gray, air suspension with lift function, raising and lowering, lift axle on 1st and 3rd axle, disc brakes, fixed side underrun guard, toolbox, 2x LED reversing spotlights, 4x side LED reversing spotlights (2 each on the landing gear + 2 behind the axle assembly), 1x LED spotlight in the cargo area, broom and shovel holders mounted on the left-side underrun guard (in direction of travel), Cargofloor control type CF 500 SL-C - E"-CONTROL 6 mm with additional plastic guides under the floor profiles, swing doors (half/half with horizontal locking bar), radio remote control, rear door crash protection – aluminum buffer running the full width of the rear wall, hoop and tarpaulin, front left service flap, working platform with ladder, PVC rolling tarpaulin (Panama quality, 900g/m²), cargo securing certificate DIN EN 12642 Code XL, production date 5/2025, grain hopper/sluice with central discharge at the rear and dust bag, immediately available. Fpsdpfx Ajxac Dpea Njg

Condition: used, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 10,600 mm, loading space width: 2,550 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2025, Equipment: ABS, Stock No. 5768 Approx. 60m³ Stas Agrar moving floor semi-trailer with grain hopper / remote control / Also available for rent! ---- * Manufacturer: Stas * Model: Farmstar - Agrar Moving Floor * First registration: 09/2025 * Gross weight: 36,000 kg * Unladen weight according to registration: 6,440 kg * Payload: 29,560 kg * Axles: 3x Jost axles / 1st axle with lift axle and traction aid / disc brakes * Suspension: Air suspension with lifting and lowering function * Tyres: 385/65 R22.5 with Alcoa matte aluminium rims, approx. 50% tread remaining * EBS * Colour: Chassis RAL 9005, body RAL 9010, sliding tarpaulin SIO 601 Opal Green * Capacity: Approx. 60m³ (10.60m long x 2.55m wide x 2.30m high) * Inspection (TÜV): 09/2026 Fpjdpsywq Rbsfx Aa Nsg * CARGO FLOOR CF 500 SL-C with wireless remote control and operating console on the left in front of the axles * 21-board floor system, 6mm ribbed * Aluminium end caps, welded * Rear closure plate in aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residual emptying partition wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and outside (grain specification), fully welded * Inspection window at the rear left side wall * Twin-wing doors (50/50) * 4x lock rods for secure locking * 2x sampling slides (left and right) * Swivelling rear crossbeam * Operator platform with access steps front left and right * Fifth wheel height 1,150 mm * Individual mudguards * Heavy-duty support legs (aluminium drop legs) * Sliding tarpaulin (680g/m²) with quick-fix system * Aluminium braces, foldable * Rear aluminium light guard (foldable) * Aluminium air tank * Tool box on right side * Shovel and broom holders on left side * 1x aluminium ladder on right side, 2.50m * 1x extendable ladder at rear, right side * Smartboard * TPMS tyre pressure monitoring * LED rear lights ECOLED III * One owner German semi-trailer! German documentation! Also available for rent! Notice concerning possible errors in the listing: Despite careful preparation of this advertisement, occasional errors may occur in the text or specifications. No liability is accepted for mistakes, alterations or prior sales. All information supplied without guarantee. Please contact us to verify details or if you have further questions.

Condition: used, maximum load weight: 28,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2008, loading space length: 7,700 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, loading space volume: 28 m³, total width: 2,550 mm, total height: 8,800 mm, Equipment: ABS, Langendorf aluminium tipper semi-trailer with 3 axles Fpodox Stvvjpfx Aa Nsg Payload: 28,950 kg Colour: Silver Brakes: Drum Axle: BPW 1x tarpaulin cover Length: 7.70 m Width: 2.30 m Height: 1.60 m We are also happy to assist with financing or leasing through our partners. All information is provided without guarantee. Subject to errors and prior sale.