MAHR MahrShaft SCOPE 250 plus

MAHR MahrShaft SCOPE 250 plus

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Hodpfx Aew Rdvvsbhop Further information available on request!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, ZEISS ACCURA measuring machine 12/10/10 automatic Measuring range: 1200x1800x1000 Head: ZEISS RDS CAA Sensor: ZEISS VAST XXT - TL3 Probe changer: 3 stations Controller: ZEISS C99 Software: Calypso 2011 Year of manufacture: 2011 Warranty: to be agreed Description: machine in perfect working order and excellent cosmetic condition Hsdpfexq R R Eox Abhjp

Condition: used, Year of construction: 2000, cutting diameter 280 mm saw band length 4930 mm capacity 90 degrees: square 280 x 280 mm capacity 45 degrees: round 280 mm capacity 45 degrees: square 280 x 280 mm capacity 60 degrees: round 220 mm capacity 60 degrees: square 200 x 200 mm feed length 600 mm Hjdpfx Absw En Efehsp feed length: multiple 5400 mm cutting speed 17 - 90 m/min length of rest piece min/max min. 30 mm saw diameter min. 10 mm control KASTO, Compact Control total power requirement 5 kW weight of the machine ca. 1,75 t dimensions of machine L x W x H 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width; roller track 1350 mm length, 300 mm width

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Hsdpjyvvt Sjfx Abhsp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2016, condition: reconditioned (used), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, manufactured in 2015/16. Condition: Good, has been used partially with soft water. No dosing unit included! These machines are former lease units. Various configurations are available, potentially with internal salt softener, with GIO module, or completely without softener. Please let us know how you would like your package to be assembled. The quoted price is a base price depending on the equipment—request your individual offer! Comes with a 6-month spare parts warranty. Preventive maintenance with replacement of several wear parts has been performed regularly. Inspection and test run on site is possible and encouraged. Technical Data: Output: up to 60/40/17 racks (equals approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Hsdpjp Ebn Dsfx Abhsp Program cycle times: 60/90/210 seconds Rack size (mm): 500 x 500 Entry height: 440 mm Tank capacity: 22 L Water consumption per rack: 2.6 L Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: Stainless steel Connected load: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical Installation: Electrical connection: 3-phase current, 3 NPE, 400 V, 50 Hz. The electrical setup complies with VDE regulations. Water Installation: The dishwashers can be connected directly to the mains water supply without additional safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. Installation regulation EN 1717 must be observed. Drain: ¾". On-site wall drain max. 700 mm height. Length of connection hoses approx. 1.8 m from machine. Collection of the machines is preferred. Shipping via freight company is possible at buyer’s expense.

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Hjdpfx Abeu R R Acehep Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Circle blade size: 6830 x 41 x 1,3mm Power: 7.5kW Length: 4600mm Width: 2150mm Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend Hjdpfxjuwv H Ho Abhop -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 1992, Measuring range, X-axis: 2400 mm Measuring range, Y-axis: 1200 mm Measuring range, Z-axis: 1500 mm Hjdsg Er Nlepfx Abhsp Machine weight: approx. 9.00 t

Condition: new, 6 St. range L-W-H 880 x 580 x 800 mm weight 126 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 2 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers Hsdpoupxrbofx Abhep 1x stacking tray

Year of construction: 2019, condition: ready for operation (used), number of axes: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. Hjdpfx Absx D I Etshep • Laterally correct image (no reflection) for easy evaluation • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary stage type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for precise readings • Illumination: combination of contour (transmitted) and vertical (incident) light • Light source: 24 V / 150 W halogen for high-quality projection • 4-fold condenser in transmitted light with automatic illumination adjustment to magnification • Optics: semi-transparent mirror for clear incident-light image; telecentric lenses for distortion-free imaging across the full field • Focusing via movable optical head (stage remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/area illumination ±0.15% • Solid construction with precision-engineered guides; workshop-ready and easy to operate • Proven Nikon quality, made in Japan • Large projection area suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision mechanics, and sample inspection • Flexibly upgradeable with digital interfaces or SPC connectivity