Used window production machinery for sale (137)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! Lhsdpfxozlnxio An Ioi TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Condition: used, Year of construction: 2017, The SD 500 industrial double-head saw with a hydropneumatic feed system for the cutting discs is a machine model with cutting discs that extend from below. As standard, the left head is fixed. The right head is mobile and is moved using a highly precise servo drive. The cutting length readout is completely independent of the drive for the mobile head. The machine is equipped with fixed stops for angles of 45º and 90º. Intermediate angles can also be achieved. Both heads are equipped with main vertical and horizontal clamping devices. The discs, set at an angle of 45º inwards, eliminate the need for corrections. Because the cutting discs extend from bottom to top and the main vertical clamping devices act on the profile at the point of its highest stiffness, the profile does not bend in the housing groove. This ensures that both the angles and planes are maintained, with the additional support of the horizontal clamping device. The machine's operation is controlled via an independent control panel equipped with a DELL PC. Standard equipment: independent control panel with a PC cutting length readout independent of the head drives (from a magnetic strip) electronic positioning of the mobile head automatic machine zeroing cutting of 2 to 4 profiles simultaneously discs extending from below in a / \ arrangement, eliminating the need for corrections hydropneumatic feed system for the cutting discs triple vertical and horizontal pneumatic clamping pneumatic adjustment of the disc extension angle (90°-45°) spacer between the heads, applied manually 4 outlets for industrial extraction, Ø100mm cooling system Lodpfxoznuk Rs An Ijhi cutting length: min 300mm, max 3300mm roller guide at the mobile head, 3000mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, For sale: ROTOX ZSA 263 automatic profile cutting machine, year of manufacture 2012. The machine is in working condition, regularly used, and available for inspection and testing by prior appointment. Lhedpfoy Sk Amsx An Isi Main features: - CNC control system - Cutting angles: 45°, 90°, and 135° - Pneumatic profile clamping - Automatic profile feeding - Right and left side material transport - Suitable for automatic cutting of PVC profiles The ROTOX ZSA 263 is a reliable and high-performance industrial machine, ideal for companies involved in window and door manufacturing. For more information or to arrange a viewing, please feel free to contact us.

Condition: excellent (used), Year of construction: 2013, SN: 4036860, 400 V connection, compressed air 6 - 7 bar, saw blade diameter Ø 300 mm, net weight 250 kg, infeed table, outfeed table, digital crosscut fence, control panel, B&R, Automation Panel type, mobile dust extraction unit, Elektra Beckum, SPA2000D type, connected load 2/2.8 kW, 400 V, connection nozzle Ø 100 mm, year 2000. Lodpfx Anszlr Ins Ishi

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Lhedpfx Aoznwq Tjn Ioi

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), Lodpfx Anjzlpabj Ishi • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: used, Year of construction: 2006, machine/vehicle number: 2638006, functionality: fully functional, operating hours: 32,000 h, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 6,500 mm, workpiece width (max.): 180 mm, workpiece height (max.): 150 mm, number of axes: 1, number of slots in tool magazine: 10, controller manufacturer: Beckhoff, actuation type: pneumatic, total height: 1,800 mm, total length: 14,000 mm, total width: 2,500 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Equipment: CE marking, If you are interested, we would be happy to send you a video. Ljdpfjzndl Dsx An Iohi On-site inspection is possible. Collection only!

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Lhodszm N Nrepfx An Iei Maximum element weight 80 kg Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor Lsdpezm I Dhofx An Ijhi • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window Lhsdpfxozm Hr Rj An Ioi 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 201 S PVC ORTA KAYIT ALIŞTIRMA ( SERİ BIÇAK DEĞİŞTİRMELİ), • Robust mechanical structure capable of processing PVC profiles with high precision • Intermediate profile adjustment for PVC profiles within an angle range of -45 / +45 degrees • Easy blade set replacement system • Easy angle adjustment with mechanical supports • Adjustable support system for all types and brands of profiles • Cutting speed adjustment with a hydropneumatic system • Blade storage rack (for 3 blades) Ledpfx Ajzd Nyfen Ishi • Max. processing diameter: 160 mm • Max. blade size: 200 mm • Min: 90 mm

Condition: used, Window rubber, cutting machine, gasket cutter, pneumatic lamellar cutter, blind cutting device Lhedpjf Sgwnsfx An Ioi -Lamellar cutter: for PVC and aluminum blinds, pneumatic -Manufacturer of pneumatic components: Festo -Dimensions: 680/340/H470 mm -Weight: 55 kg

Condition: good (used), Window rubber, cutting machine, seal cutter -Hitches: 2 -Dimensions: 2500/600/H1000 mm Lsdpsb A Ncgsfx An Iohi -Weight: 15 kg

Condition: good (used), Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press Lhedpjtpyqqsfx An Iji -Manufacturer: Benzing, pneumatic cutting device -Stroke: adjustable, max. 70 mm -Individual components: see photos -Dimensions: 150/130/H450 mm -Weight: 9.3 kg

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit Lhjdex R Sv Sspfx An Iji -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Condition: good (used), Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press -Cutting device: mechanical cutting device 2x 45° pivoting -Stroke: max. 70 mm -Individual components: see photos Lhodpjw Sk Uhofx An Iji -Dimensions: 350/250/H680 mm -Weight: 18 kg

Condition: used, Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine Ljdpfx Aneb A Ivme Ishi -Voltage: pneumatic -Weight: 270 kg

Condition: like new (used), Year of construction: 2024, Wegoma double miter saw with 3-axis control Double miter saw DS140 Working length 4000 mm, hydropneumatic saw feed Pneumatic swivel 45°/90°/45° 4 clamping cylinders, pneumatic 2 carbide-tipped saw blades 500 x 80 mm Left saw head fixed, right saw head movable Digital display Positioning control EPS 220 For double miter saws, including EPS220 control for precise length positioning. Lhedpfxezhx A De An Iei With industrial touch panel 15 inches (dust and splash-proof) Display for manual input of cutting data or via data set integration - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer via USB or network possible. - Interface to measuring ruler incl. interface software. Incl. control cabinet, motor, and software licenses. - Short and long cut setting - Automatic cutting (can only be activated via software in conjunction with entry protection) Positioning electronics for stepless automatic swivel from 45° to 135° 4.00 92062530 Feed roller conveyor 3 meters for DS mounted on the mobile unit Machine immediately available Ex works

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, masina za ciscenje coskova Ledow Hpd Sepfx An Ishi

Year of construction: 2008, condition: ready for operation (used), This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details. • Max punching force: 30 tons • Max sheet loading size: 1500 × 4000 mm Ledoyh I Ibspfx An Iehi • Max sheet unloading size: 1500 × 4000 mm • Punching working area: 1500 × 3000 mm • Laser working area: 1500 × 2500 mm • Threading/tapping unit in turret: up to 6 taps, max M8 • Tool turret configuration: • 1 × Multitool 8/24 • 2 × Multitool 8/16 • 5 index stations • 1 forming station for forming operations • Unloading flaps: 2 for single parts (front and side)

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg Ljdpfxsv U Dlus An Iohi feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Year of construction: 2004, condition: used, cutting range 90°: 90 mm cutting range 45°: 75 mm Ledpfx Aod Ih Nkon Iehi Saw blade diameter 315 mm Table dimensions 800 x 500/400 mm Saw blade 30 mm machine weight ab. 45 kg dimensions 850 x 600 x 430 mm

Condition: used, CNC Profile Processing Line, consisting of: 1) 1-Axis CNC Cutting Centre – Pertici SC55, Year 2018 The Pertici SC55 is a 1-axis CNC cutting centre designed for the automatic cutting of PVC profiles. Thanks to its automatic loading system, the machine automatically feeds the bars, performs the cutting operations according to the production list, and unloads the finished workpieces. The Pertici software is compatible with the main optimization and production management programs available on the market. The automatic magazine can accommodate up to 10 bars with a maximum length of 6.6 metres. The cutting area is fully enclosed by protective guards, ensuring maximum operator safety and easy maintenance access. The machine is also equipped with an automatic chip and scrap evacuation system, automatic unloading of finished parts, and a collection table with a capacity of up to 12 workpieces. Main Features 1-axis CNC controlled cutting centre Automatic cutting of PVC profiles Automatic loader for up to 10 bars Maximum bar length: 6,600 mm Automatic bar detection system Compatible with the main optimization and production software Automatic unloading of finished parts Automatic chip and scrap extraction Fully enclosed safety guards with front access Collection table for finished parts Cutting Angles The SC55 automatically performs cuts at: 45° 90° 135° (Intermediate angles available as an option.) Cutting Capacity SC55 (Ø500 mm saw blade) Maximum profile height at 90°: approx. 155 mm Maximum profile height at 45° / 135°: approx. 155 mm Maximum profile width: approximately 160 mm Minimum workable profile width: approx. 25 mm Technical Data Installed power: 6.8 kW Lhjdpfxezg Eggo An Ioi Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg 2) CNC Machining Centre – Pertici FC1000, Year 2018 The Pertici FC1000 is a high-productivity CNC machining centre for PVC profile processing. It automatically loads, positions, machines and unloads profiles, ensuring fast and efficient production. Equipped with 7 machining spindles and an automatic screwdriving unit, it performs all machining operations in a single cycle. The machine is controlled by Pertici CNC software, compatible with the main production management systems, and features an automatic magazine for up to 10 bars with a maximum length of 6,100 mm, processing profiles from 35 to 130 mm wide. Main Features 7 machining spindles Integrated automatic screwdriving unit Automatic magazine for up to 10 bars Fully automatic loading and unloading Pertici CNC software Automatic profile handling and positioning system Heavy-duty industrial frame Soundproof safety enclosure Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg Maximum bar length: 6,100 mm Profile width: 35–130 mm Available for immediate delivery from October 2026.

Condition: used, Year of construction: 2005, We offer this used Dubus PVC 9001 cutting and machining center, manufactured in 2005. Type: PVC 9001 Serial number: 2606 Lhedpfxjzk Ep Ao An Iei Year of manufacture: 2005 Month of manufacture: April If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2008, input voltage: 380 V, type of input current: three-phase, input current: 8 A, We are offering this used elumatec EV 884 corner cleaning machine, manufactured in 2008. Type: EV 884 Serial number: 88009009 Rated voltage: 380 V Lodpfszk Eahsx An Iohi Frequency: 50 Hz Number of phases: 3-phase Rated current: 8 A Date of manufacture: 28.11.2008 If you have any questions or require further information, please do not hesitate to send us a message or call us.