Cutting and machining center

Stürtz STBAZ-JC-LM-240-Z

Condition: excellent (used), Year of construction: 2021, Cutting centre for standard profiles, as well as lift-and-slide door frames and thresholds, Thorwesten ASZ 3.2M in a special design. Processing length 6,500 mm for standard profiles and the Veka 82 system for lift-and-slide door frames and thresholds. Equipped with extended infeed and outfeed. Lifting and guide rollers located under the drive belts ensure smooth transport of sliding door frames. Stepless cutting angle adjustment from 22.5° to 157.5°. Automatic optimisation and processing of off-cuts. Saw blade diameter 500 mm. Includes dust extraction system and waste conveyor. Configured for the Veka profile system, including widening options and special profiles. Full HD panel with Windows 10 operating system. Kdedpfx Aozhi Nhsdljt

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Kdjdpfxjy Nnnnj Adljt Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW Ksdpexabqzjfx Adljdt weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Kdsdpfx Aezcyqmedljt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. Kedpfozfvf Rsx Adlsdt A dynamic screwdriver reduces processing times.

Condition: excellent (used), Year of construction: 2017, It has only worked for 445 hours. Very good technical condition. Ready for operation. The machine is designed for cutting aluminum and PVC. E 580 control system. Blade diameter: 500 mm. Kdsdpfxszgu Efj Adlot Cutting according to the outer dimension, without correction. Blades guards are automatically lowered and raised. Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Printer included.

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: ELUMATEC SBZ 610 cutting center, manufactured in 2020. The machine is in perfect working order and ready for operation. Kdedpjzpwzbjfx Adljt

Condition: new, Tilting Transfer Table Brand: Pertici Model: BF TEA 20-14 Kdsdpfx Adoy A Imdolet Tilting and extendable assembly table for the production of sashes and frames. Complete with pneumatic retractable roller conveyor. Work surface with profiles equipped with anti-scratch gasket. Dimensions: Minimum width: 2,000 mm Maximum width: 3,900 mm Minimum depth: 1,374 mm Maximum depth: 2,400 mm Working height: 932 mm

Year of construction: 2024, condition: ready for operation (used), Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details. • Function: Simultaneous cutting of 4 glazing beads (45°) and milling of fixing holes • Pneumatic material clamping: Yes • Pneumatic pressure: 2 bar • Pneumatic pressure gauge with filter: Yes Kdodpfxozg Igpe Adlot • Electric locking of machine cover: Yes • Clamping plates: Tool-free • PVC profile section capacity: Min 50 × 50 mm; Max 375 × 45 mm • Cutting length: 200 mm (without length stop); 260 mm (with length stop) • Electrical connection: 400 V / 50 Hz • Installed power: 1.1 kW • Profile list: Available • Operating instructions: English • Machine inscription: Italian • Attachment side: Right

Condition: used, CNC Profile Processing Line, consisting of: 1) 1-Axis CNC Cutting Centre – Pertici SC55, Year 2018 Kdjdpfx Ajzg Eggjdlot The Pertici SC55 is a 1-axis CNC cutting centre designed for the automatic cutting of PVC profiles. Thanks to its automatic loading system, the machine automatically feeds the bars, performs the cutting operations according to the production list, and unloads the finished workpieces. The Pertici software is compatible with the main optimization and production management programs available on the market. The automatic magazine can accommodate up to 10 bars with a maximum length of 6.6 metres. The cutting area is fully enclosed by protective guards, ensuring maximum operator safety and easy maintenance access. The machine is also equipped with an automatic chip and scrap evacuation system, automatic unloading of finished parts, and a collection table with a capacity of up to 12 workpieces. Main Features 1-axis CNC controlled cutting centre Automatic cutting of PVC profiles Automatic loader for up to 10 bars Maximum bar length: 6,600 mm Automatic bar detection system Compatible with the main optimization and production software Automatic unloading of finished parts Automatic chip and scrap extraction Fully enclosed safety guards with front access Collection table for finished parts Cutting Angles The SC55 automatically performs cuts at: 45° 90° 135° (Intermediate angles available as an option.) Cutting Capacity SC55 (Ø500 mm saw blade) Maximum profile height at 90°: approx. 155 mm Maximum profile height at 45° / 135°: approx. 155 mm Maximum profile width: approximately 160 mm Minimum workable profile width: approx. 25 mm Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg 2) CNC Machining Centre – Pertici FC1000, Year 2018 The Pertici FC1000 is a high-productivity CNC machining centre for PVC profile processing. It automatically loads, positions, machines and unloads profiles, ensuring fast and efficient production. Equipped with 7 machining spindles and an automatic screwdriving unit, it performs all machining operations in a single cycle. The machine is controlled by Pertici CNC software, compatible with the main production management systems, and features an automatic magazine for up to 10 bars with a maximum length of 6,100 mm, processing profiles from 35 to 130 mm wide. Main Features 7 machining spindles Integrated automatic screwdriving unit Automatic magazine for up to 10 bars Fully automatic loading and unloading Pertici CNC software Automatic profile handling and positioning system Heavy-duty industrial frame Soundproof safety enclosure Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg Maximum bar length: 6,100 mm Profile width: 35–130 mm Available for immediate delivery from October 2026.