Second-hand machinery for sale (2,00,000)

Condition: not inspected (used), functionality: unexamined, Year of construction: 2019, operating hours: 13,213 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,400kg Duplex Free Lift Electric Forklift No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 3,145 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 13,213 h Mast type: Duplex Drive type: Electric Battery: 48 V 500 Ah, measured at 49.5V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,100 x 2,121 mm Weight: 3,100 kg Nodpfx Aksyzfylefscr EQUIPMENT Former Linde full-service unit Duplex mast with full free lift 3rd valve with sideshift Load guard (can be easily removed) All dimensions are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site, at buyer’s own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment Monday to Friday 7:00 am–4:30 pm. High masts can be dismantled for transport on request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day applies (payment due before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2019, operating hours: 3,446 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027, Battery 19/2022 No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,140 mm Fork length: 1,800 mm Free lift: 1,519 mm Design: Counterbalance forklift MACHINE DETAILS Ncedeyzfx Uspfx Akfsr Operating hours: 3,446 h Drive type: Electric Battery: 19/2022 48V 750A, 49.6V (very good performance!) Mast type: Duplex Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,121 mm Weight: 3,500 kg EQUIPMENT Former Linde full-service unit Valve side shifter Duplex mast with full free lift All measurements are approximate. No liability for typing or measurement errors. COLLECTION TERMS Side loading up to 5 t possible onsite with a large forklift at buyer's own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment, Monday to Friday 7:00–16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (outstanding payment must be settled before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2018, operating hours: 10,732 h, load capacity: 4,000 kg, lifting height: 5,400 mm, free lift: 150 mm, construction height: 3,570 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV until 02/2027, 4,000 kg, 3rd + 4th valve, fork positioner, diesel forklift truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 5,400 mm Fork length: 1,200 mm Free lift: 150 mm Type: counterbalance forklift MACHINE DETAILS Operating hours: 10,732 h Drive type: diesel Mast type: full free-view Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,450 x 3,570 mm Weight: 6,400 kg FEATURES Former Linde full-service unit Next service due in 768 hours Nodpfxjyzfxus Akfjcr Free-view mast, no central hydraulic cylinder 3rd + 4th hydraulic valve; multiple fork positioner + side shifter (single fork positioner available on request) Full cab with heating and windshield wiper LED work light, front LED work light, rear Comfort seat with lumbar support and seat heating Note: Mast disassembly can optionally be offered by the seller for €950 net. All measurements are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high for transport can be dismantled on request. If not collected within the agreed period, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2018, operating hours: 11,264 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 150 mm, construction height: 3,354 mm, DGUV certified until: 01/2027, Equipment: UVV, Service + UVV 01/2027 5,000kg EVO 3rd & 4th Valve Fork Positioner Electric Forklift No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,000 mm Fork length: 2,400 mm Free lift: 150 mm Type: Counterbalance forklift MACHINE DETAILS Operating hours: 11,264 h Mast type: Clear view Drive type: Electric Battery: 17/09/2018, 80V 6PzS 930Ah, measured at 85.5V (very high performance!) Dimensions & Weight Dimensions (L x W x H): 5,400 x 1,400 x 3,354 mm Weight: 8,300 kg EQUIPMENT Former Linde Full-Service machine 3rd & 4th valve; fork positioner with sideshift Mast position memory installed Full cabin with heating Note: Mast disassembly can optionally be offered by the seller for €950 net. All dimensions are approximate. No liability for typographical or measurement errors. Njdpfx Ajyzfwqekfocr COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at buyer’s own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday, 7:00–16:30. Tall mast can be disassembled for transport on request. If collection is not made on time, a storage fee of €20 per machine per day applies (payment must be settled before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H21279V00104, Year of construction: 2019, operating hours: 15,226 h, load capacity: 7,000 kg, lifting height: 5,250 mm, free lift: 150 mm, fork length: 2,000 mm, 7,000kg S+UVV 02/2026 Electric Forklift Truck 3rd & 4th Valve No reserve price – guaranteed sale to the highest bidder! TECHNICAL SPECIFICATIONS Load capacity: 7,000 kg Lift height: 5,250 mm Overall height: 3,780 mm Fork length: 2,000 mm Free lift: 150 mm MACHINE DETAILS Mast type: Clear-view Drive type: Electric Dimensions & Weight Dimensions (L x W): 6,000 x 1,700 mm Weight: 13,500 kg Battery: Hawker Ironclad 80V/8PzS/1376Ah (measured 82.35V) Operating hours: 15,226 h EQUIPMENT Ex-Linde full-service machine UVV inspection valid until 02/2026 Service valid until 02/2026 or up to 1,000 operating hours Clear-view mast without central hydraulic cylinder Full cab with heating, air conditioning, and wipers Facelift model with tilt angle display 3rd & 4th valve Note: The forklift is sold without side shift (internal width 22–172 cm). Dismantling of the mast can be optionally offered by the seller for €950 net. Ncodeyzfu Njpfx Akfsr All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t is possible onsite with a large forklift at your own risk. Collection ONLY upon receipt of payment confirmation via email! Collection WITHOUT prior notice possible Monday to Friday 7:00–16:30. A high mast can be dismantled for transport on request. If not collected on time, a storage fee of €20 per machine per day will be charged (to be paid before collection).

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Deflection pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw band length: 4,700 mm Loading height: 1,065 mm Cutting height: 350 mm Cutting width without rip fence: 610 mm Cutting width with fence: 150 mm Cutting speed: 10 - 100 m/min Table travel: 600 mm Table feed speed: 0.03 - 0.3 m/min MACHINE DETAILS Extraction connection diameter: 1 x 120 mm + 1 x 100 mm Required air velocity: minimum 25 m/s Required air volume flow: 1,725 m³/h Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,200 x 2,300 mm Machine weight: 550 kg Motor power: 0.75 kW Operating voltage: 400 Volt / 50 Hz Power supply: 3 x 400 Volt Fuse protection: maximum 16 Amperes Nodjyzy Drspfx Akfecr Minimum cross-section: 1.5 mm²

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: H18/X2090/202/00162, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum rotational speed: 16.8°/s Maximum linear speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Ncsdpfx Akjyzyxcefer Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 – 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 System protection rating: IP20 Average floor surface pressure max.: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool parking station: 4 tools per station Tool changing system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic signals: 4 LED units, storage for up to 16 audio files

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 635949, load capacity: 210 kg, arm reach: 2,696 mm, repeat accuracy: 0.06 mm, number of axes: 6, TECHNICAL DETAILS Payload: 210 kg Arm reach: 2,696 mm Outreach: 2,696 mm Axes: 6 Repeatability: 0.06 mm MACHINE DETAILS Control cabinet dimensions (L x W x H): 800 x 560 x 1,060 mm Ncedpfx Akoyzyvhsfjr EQUIPMENT Robot Control cabinet Cables Teach pendant

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe Nedoyzyttjpfx Akfocr - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, controller model: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm Ncjdpfx Aeyzxz Nokfsr T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with adjacent station free: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Guides X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Linear guides X/Y/Z Chip conveyor Handwheel Note: The machine is sold without tools and vise.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Nedpfx Akeyx Et Hefocr Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 98 h, machine/vehicle number: GS30D-29313, load capacity: 227 kg, platform length: 2,790 mm, platform width: 780 mm, overall weight: 1,279 kg, working height: 7,640 mm, TECHNICAL DETAILS Working height, indoor: max. 7.64 m Working height, outdoor: max. 6.27 m Platform height, indoor: max. 5.64 m Ncedpoyzrluofx Akfer Platform height, outdoor: max. 4.27 m Platform length, retracted: 0.89 m Platform length, outdoor: 1.88 m Platform length, outdoor, extended: 2.79 m Platform extension, length: 0.91 m Platform width, outdoor: 0.78 m Guardrail height: 1.10 m Toe board height: 15 cm Height, retracted, folding guardrail: 2.00 m Height, retracted, guardrail folded down: 1.50 m Length, retracted, with integrated or optional ladder: 1.88 m Length, retracted, with platform extension extended: 2.79 m Width: 0.81 m Wheelbase: 1.55 m Ground clearance, center, with retracted pothole protection: 10 cm Ground clearance, center, with extended pothole protection: 2 cm Maximum number of persons on platform (indoor/outdoor): 2 / 1 Load capacity: 227 kg Load capacity, with platform extension extended: 113 kg Drivable up to: max. platform height 5.64 m Travel speed, retracted: 4.0 km/h Travel speed, extended: 0.8 km/h Gradeability, retracted: 25% Turning radius, inside/outside: 0 / 1.80 m Lifting/lowering time: 33 / 30 s Tilt sensor activation (longitudinal/lateral axis): 3° / 1.5° Non-marking solid rubber tires: 31 × 11 cm MACHINE DETAILS Drive type, FLA: 24 V DC (2 × 12 V, 150 Ah) Drive type, AGM: 24 V DC (2 × 12 V, 132 Ah or 150 Ah) Drive type, lithium-ion: 24 V DC (1 × 24 V, 90 Ah or 106 Ah) Hydraulic system tank capacity: 6.1 l Own weight: 1,279 kg Maximum own weight, including all possible options: 1,397 kg Maximum tire load: 642 kg Tire contact pressure: 1,084 kPa Floor loading: 10.42 kPa Noise/sound pressure level (ground): < 70 dBA Noise/sound pressure level (platform): < 70 dBA Vibration: < 2.5 m/s²

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 516 h, machine/vehicle number: A300057584, load capacity: 200 kg, platform length: 700 mm, platform width: 1,050 mm, overall weight: 4,900 kg, working height: 12,650 mm, TECHNICAL DETAILS Working height: 12.65 m Lateral outreach (standard platform): 6.05 m Up-and-over height: 7.12 m Slew range: 345° Platform capacity: 200 kg Articulated jib length: 4.14 m Jib movement range: 120° (+60° / -60°) Platform size (L × W, standard platform): 0.70 × 1.05 m Platform width: 1.20 m Tail swing: 13 cm Transport height: 1.99 m Transport length (standard platform): 3.65 m Wheelbase: 1.60 m Ground clearance: 10 cm Max. permissible ground pressure: 14.0 kg/cm² Travel speed, stowed: 6.0 km/h Outside turning radius: 2.60 m Inside turning radius: 0.75 m Gradeability: 30% MACHINE DETAILS Machine weight (standard platform): 4,900 kg Tyre size (non-marking): 457 × 178 mm Operating voltage: 48 V DC Batteries (Deep Cycle): 48 V – 260 Ah Charger: On-board 110 V / 230 V HF Drive motors: 2 AC motors Electric motor (hydraulic pump): 3.5 kW – 48 V DC Hydraulic oil capacity: 15 l EQUIPMENT Steel platform Sliding bar at rear entrance Proportional drive and slew control via joystick with integrated thumb steering switch Mini joysticks for proportional boom, telescope, and jib operation Large platform console with function enable Load sensing system AC power cable to platform Large tool tray Direct electric two-wheel drive Nodpsyzrg Sjfx Akfjcr Brushless AC drive motors Automatic idle energy-saving function Low-charge cut-off function On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Lashing and lifting lugs Ground control selector switch with key lock Battery discharge indicator Hour meter Horn Direction orientation system Anchor points for safety harnesses Manual descent system Passive pothole protection system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 67 h, machine/vehicle number: C170003922, load capacity: 230 kg, platform length: 1,340 mm, platform width: 690 mm, overall weight: 2,840 kg, working height: 20,050 mm, TECHNICAL DETAILS Working height: 20.05 m Outreach (standard platform): 9.70 m Ncjdpoyzrfzefx Akfjr Platform capacity: 230 kg Up-and-over clearance at 230 kg: 8.20 m Slew range: 360° Articulating jib length: 1.68 m Articulating jib movement range: 89° (+0° / -89°) Basket rotation: 124° (+/-62°) Maximum ground clearance (retracted/extended): 0.79 / 1.09 m Platform size (standard, 2 persons): 0.69 × 1.34 m Platform size (narrow, 1 person): 0.60 × 0.78 m MACHINE DETAILS Transport width (with standard platform): 1.34 m Stowed width (without platform): 0.80 m Stowed height (on tracks): 2.00 m Stowed length (on tracks): 5.00 m Stowed length (on tracks, without basket): 4.40 m Stabilizer footprint: 2.92 × 2.93 m Machine weight (with standard platform): 2,840 kg Climbing ability: 28.7% Maximum permissible working angle: 15° Maximum approach/departure angle (front/rear): 20° / 21° Maximum ground pressure (with outriggers): 3.10 kg/cm² Travel speed (single speed nc/petrol): max. 1.1 km/h EQUIPMENT Aluminum platform Rear sliding entry Foot pedal Fully proportional controls Articulated arm Remote control by cable to platform Fully remote-controlled drive and stabilization functions Multilingual LCD display at platform console Position sensor and console locking Load monitoring system for the work platform Platform with easy removal or exchange Engine protection Rubber tracks Cylinder protection for stabilizers Automatic shut-off when not level Electronic drive management system Electrohydraulic controls Fully proportional hydraulic control Lifting and lashing eyes Forklift pockets

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 286 h, machine/vehicle number: Z4525M-10187, load capacity: 227 kg, platform length: 760 mm, platform width: 1,830 mm, overall weight: 7,400 kg, working height: 15,940 mm, TECHNICAL DETAILS Ncedpjyzrctofx Akfjr Working height: 15.94 m Platform height: 13.94 m Horizontal reach: 7.65 m Up-and-over clearance: 7.24 m Platform length: 0.76 m Platform width: 1.83 m Stowed height: 2.00 m Stowed length: 6.83 m Width: 1.79 m Wheelbase: 2.03 m Ground clearance (center): 0.24 m Lift capacity: 227 kg Platform rotation: 160° Jib length: 1.52 m Jib vertical rotation: 135° Upper structure rotation: 355° Drive speed (stowed): 4.8 km/h Drive speed (raised/extended): 1.0 km/h Gradeability (stowed): 30 % Tilt sensor activation (longitudinal/lateral axis): 2.5° – 4.5° / 4.5° Turning radius (inside/outside): 1.8 m / 4.27 m Tyres: 0.23 × 0.37 m MACHINE DETAILS Drive type: 48 V DC (8 × 6 V, 350 Ah or 355 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 30.3 l Operating weight: 7,400 kg Tyre contact pressure: 689 kPa Ground load (tyres): 15.08 kPa Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s²

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 852 h, machine/vehicle number: 0300230251, load capacity: 227 kg, platform length: 1,520 mm, platform width: 760 mm, overall weight: 6,532 kg, pivoting range: 360 °, TECHNICAL DETAILS Platform height: 13.72 m Horizontal outreach: 7.24 m Up-and-over clearance: 7.70 m Slewing range: 360° continuous rotation Platform capacity: 227 kg Platform rotation: 180° Vertical jib articulation range: 144° (+86° / -55°) MACHINE DETAILS Machine weight: 6,532 kg Max. ground pressure: 7.6 kg/cm² Driving speed: max. 7.2 km/h Gradeability: 30% Turning radius (inside, 2WS/4WS): 0.61 m Turning radius (outside, 2WS/4WS): 3.15 m Electrical system: 48 V DC Batteries: 8 × 6 V, 375 Ah AC power outlet on platform: 110 V Additional power supply: 12 V Standard tires: 24 × 9 × 12.5 Optional tires: 26 × 7 × 20, non-marking Hydraulic tank capacity: 15.14 l Platform width: 76 cm Platform length: 1.52 m Machine width: 1.75 m Ncodpfx Akjyzq Uujfsr Machine height: 2.01 m Machine length: 6.45 m Wheelbase: 2.01 m Ground clearance: 20 cm EQUIPMENT Dual electric traction motors Foam-filled, non-marking tires Electric turntable All-wheel drive Automatic traction control Battery charge indicator Brushless AC motors ClearSky Smart Fleet Horn Hour meter LED lighting with amber beacon Lifting and tie-down lugs Load sensing system Platform leveling system Platform status indicator light SkyGuard SkyLine Tilt alarm and warning light

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 314 h, machine/vehicle number: GS47D-9115, load capacity: 350 kg, platform length: 3,180 mm, platform width: 1,160 mm, overall weight: 3,221 kg, working height: 13,700 mm, TECHNICAL DETAILS Working height: 13.70 m Platform height: 11.70 m Guardrail height: 1.10 m Toe board height: 0.15 m Platform height, retracted: 1.43 m Platform length, outside: 2.26 m Platform length, extended: 3.18 m Platform extension: 0.91 m Platform width, outside: 1.16 m Height, retracted, foldable guardrail: 2.54 m Height, retracted, guardrail folded down: 1.95 m Length, retracted: 2.48 m Length, with platform extension deployed: 3.18 m Width: 1.19 m Wheelbase: 1.85 m Ground clearance, centre: 0.10 m Ground clearance, with pothole protection deployed: 19 mm Load capacity: 350 kg Platform extension capacity: 113 kg Drive speed, stowed: 3.2 km/h Drive speed, extended: 0.8 km/h Gradeability, stowed: 25 % Nodpfx Akeyzq Rpsfscr Turning radius, inside: 0 m Turning radius, outside: 2.3 m Lift/lower time: 71/41 s Drive system: Two-wheel front-wheel drive Tyre dimensions: 38 × 13 × 28 cm / 15 × 5 × 11 in Control: proportional Brakes: Two-wheel rear axle, hydraulic-dynamic braking of the front drive wheels, multi-disc brakes MACHINE DETAILS Drive type: 24 V, 300 Ah Batteries: 4 × 12 V, 150 Ah Hydraulic system tank capacity: 28.4 l Noise/sound pressure level at ground: < 70 dBA Noise/sound pressure level at platform: < 70 dBA Vibration: < 2.5 m/s² CE own weight: 3,221 kg FEATURES Foldable guardrail with platform Full guardrail swing door Smart Link™ control system Recessed rear socket for charger Platform control panel with battery charge indicator Fully integrated diagnostics system Power cable to platform Attachment points for safety harnesses Emergency lowering valve for manual platform descent Emergency stop switches at platform and ground control panels Multi-disc brakes on rear axle Hydraulic-dynamic braking on front drive wheels Manual brake release device Side swing-out battery box and hydraulic components box Pothole protection Tilt angle sensor with acoustic alarm Descent alarm Flashing warning light Electronic horn Hour meter Telematics-ready connection

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 252 h, machine/vehicle number: Z34ND-1177, load capacity: 227 kg, overall weight: 5,178 kg, pivoting range: 355 °, working height: 12,520 mm, TECHNICAL DETAILS Working height: 12.52 m Platform height: 10.52 m Horizontal outreach: 6.78 m Up-and-over height: 4.65 m Dimensions Platform length: 0.76 m Platform width: 1.42 m Stowed height: 2.00 m Stowed length: 5.72 m Transport height: 2.26 m Transport length: 4.19 m Width: 1.47 m Wheelbase: 1.88 m Ground clearance (center): 0.14 m Performance Lift capacity: 227 kg Platform rotation: 180° Jib length: 1.22 m Vertical jib rotation: 139° Turntable rotation: 355° Drive speed (stowed): 6.4 km/h Drive speed (raised, extended): 1.1 km/h Gradeability (stowed): 35% Tilt sensor activation (longitudinal/lateral): 2.5° - 4.5° / 4.5° Turning radius (inside/outside): 2.13 m / 4.08 m Tyres (solid, non-marking): 56 × 18 × 45 cm Drive/Power Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l Noise and Vibration Levels Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s² MACHINE DETAILS Ncsdpfx Akjyzq A Eofer Own weight: 5,178 kg Wheel contact pressure: 710 kPa Floor loading (wheels): 14.75 kPa Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 128 h, machine/vehicle number: A300063328, power: 3 kW (4.08 HP), overall weight: 2,600 kg, maximum load weight: 200 kg, pivoting range: 345 °, working height: 10,100 mm, TECHNICAL DETAILS Working height: 10.10 m Lateral outreach (standard platform): 3.38 m Up-and-over height: 6.51 m Slew range: 345° Platform capacity: 200 kg Articulating jib length: 1.60 m Articulating jib movement range: 126° (+69°/-61°) Platform size (L × W): 0.70 × 0.90 m Platform width: 0.99 m Max. permissible ground pressure: 19.7 kg/cm² Drive speed, stowed: 5.5 km/h External turning radius: 1.99 m Internal turning radius: 0.55 m Climbing ability: 25% Ground clearance: 0.10 m MACHINE DETAILS Tire size (non-marking): 406 × 125 mm Operating voltage: 24 V DC Batteries (AGM): 24 V – 260 Ah Charger: 24 V – 27 A Drive motors: 2 AC motors Electric motor (pump): 3 kW, 24 V DC Hydraulic oil volume: 7.5 l Dimensions & Weight Transport length: 2.82 m Transport width: 1.20 m Transport height: 1.99 m Machine weight (standard platform): 2,600 kg EQUIPMENT Steel platform Sliding bar at rear access Proportional drive and slew control via joystick with integrated thumb steer switch Mini joysticks for proportional boom and articulated jib lift functions Load monitoring system Mains power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge automatic cut-off Nedpfx Akjyzq Axefscr On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Passive pothole protection system Tie-down and lifting eyes Ground controls selector switch with key lock Battery discharge indicator Operating hours counter Horn Drive orientation system Anchor points for safety harnesses Xenon strobe beacon Manual lowering system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Ncsdsyzyh Djpfx Akfor Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Njdpfeyzya Tex Akfscr Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, stroke length: 230 mm, overall weight: 16,500 kg, controller manufacturer: Siemens, TECHNICAL DETAILS Max. part size: 1,250 x 2,550 mm Part thickness: 6 - 35 mm Heating plate dimensions: 1,600 x 2,800 mm Max. heating temperature: 140 °C Stroke: 230 mm MACHINE DETAILS Control system: Siemens Total connected load: 38 kW Weight: 16.5 t EQUIPMENT Ncedpfx Akoyztn Rjfer 2 aluminum tables Spare table PiN table

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Njdpfx Akeyztagofecr Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5211291, feed rate X-axis: 16 m/min, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Abrasive belt length: 2,620 mm Workpiece thickness: 3 to 160 mm Feed speed range: 3 – 16 m/min (infinitely variable) MACHINE DETAILS Motor power: approx. 15 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,500 x 2,500 mm Machine weight: approx. 4,300 kg EQUIPMENT Ncjdpfx Asyx Et Tskfsr Cross unit for intermediate lacquer sanding Combination unit (roller + sanding pad) Electronic segmented sanding pad for precise surface finishing Finishing brush for perfect end results Ionization device for dust neutralization Dust extraction with propeller fan for a clean working environment Touchscreen control for user-friendly operation Calibrating and fine sanding in a single pass High flexibility due to multiple units Robust construction for industrial use Ideal for processing lacquered, veneered, and solid wood panels Note: The above data is taken from the manufacturer’s brochure or documentation and may differ from actual values.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Ncodpfxeyz Rxaj Akfjr Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar