Second-hand machinery for sale (2,00,000)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Note: Register for free or log in, to access all information.
Listing
United Arab Emirates
2,608 km
Tractor
New HollandTT.55
Call
Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories =
- PTO
= Remarks =
Country of origin: India
Displacement: 2,931cc
Torque: 203 Nm @ 1400 rpm
Dimension: 3,500 x 1,920 x 2,200
No. of cylinders / aspiration: 3 / naturally
Dedpfx Agsy Tyg Rs Heuu
Capacity (cm³): 2931
Bore x stroke (mm): 104x115
Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0
Max. torque (gross) (Nm@rpm): 203 @ 1400
Torque rise (%) 25
Transmission - 30 kph 8F+2R
constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection
Speed range (kph) 2.97-29.74
Optional with creeper (F+R) 12+3
Min. speed with creeper (kph) 0.96
Optional without creeper (F+R) 12+3
Speed range (kph) 2.0-29.74
Flexion Bar lower link draft sensing Standard
Rear linkage category Cat. II
Mechanical lift with Lift-O-Matic™ Standard
Position
draft
mixed and float controls Standard
Main pump flow - Standard (lpm) 45
Steering pump flow (lpm) 28
Max. number of remote valves 2
Linkage
Maximum lift capacity at ball ends with no assist arms (kg) 1400
Maximum lift capacity at ball ends with assist arms (kg) 1850
Engine speed at 540 rpm (rpm) 1967
PTO activation mechanical
Turn angle 2WD/4WD (°) 52/38
Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200
Dimensions
Overall length 2WD/4WD (mm) including FWC 3500
Overall width 2WD/4WD (mm) 1920
Height to top of exhaust 2WD/4WD (mm) 2200/2200
Wheelbase 2WD/4WD 2050/2005
Track width Front 2WD (mm) 1410-1710
Track width Front 4WD (mm) 1445-1875
Track width Rear Min. / Max. (all axle types) (mm) 1570-2100
Ground clearance under rear axle (2WD/4WD) (mm) 455/434
Weights
Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400
= More information =
Drive: Wheel
Number of cylinders: 3
Engine capacity: 2.931 cc
GVW: 2.400 kg
Wheelbase: 205 cm
Engine type: New Holland S8000
Fuel tank: 60 litres
Emission class: Euro 2
Listing
United Arab Emirates
2,608 km
Chassis cab
IsuzuNPR 85H
Call
Condition: new, power: 96 kW (130.52 HP), fuel type: diesel, tire size: 7.50 R -16-12 PR (front and rear), axle configuration: 4x2, wheelbase: 3,370 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, gearing type: mechanical, emission class: euro2, Year of construction: 2024, Equipment: air conditioning, Cabin type: Single Cab
Country of origin: Japan
Displacement: 2,999cc
Torque: 34 kg-m/ 1,600-2600 rpm
Dimension: 5,985 x 2,120 x 2,255
Brakes: HYDRAULIC, DUAL CIRCUIT + DRUMS + ABS
Steering: LH
Construction: Chassis
EXHAUST BRAKE
Dedpfx Asy Tygwog Houu
PRE AIR CLEANER
REVERSE WARNING BUZZER
FUEL TANK LOCK
REAR BUMPER
HEADER TRAY (DRIVER & PASSENGER)
TARE WEIGHT: 2,260 kg
STEERING: RECIRCULATING BALL & NUT TYPE WITH POWER ASSIST
SEATING CAPACITY: 1+2 PERSONS
= More information =
Tyre size: 7.50 R -16-12 PR (front and rear)
Empty weight: 2.300 kg
Carrying capacity: 4.200 kg
GVW: 6.500 kg
Listing
United Arab Emirates
2,608 km
Crawler excavator
HyundaiHX520
Call
Condition: new, power: 327 kW (444.60 HP), gearing type: mechanical, fuel type: diesel, fuel tank capacity: 610 l, emission class: euro3, Year of construction: 2019, operating hours: 7,900 h, Country of origin: South Korea
Dusdpfjy Tygkjx Ag Hsu
Displacement: 12,700cc
Dimension: 12,260 X 3,690 X 3,790
Bucket size: 2.2 Cubic Meter
Arm length: 3.38 m
Boom length: 7.06 m
Track shoe: 600 mm
Attachments piping: Available
Overall Weight: 52.40 Ton
Bucket Capacity: 2.20 m3
Boom/Arm/Bucket: STD without Quick Coupler
with breaker line
= More information =
Number of cylinders: 6
GVW: 52.400 kg
Bucket volume: 2.2 m^3
Listing
United Arab Emirates
2,608 km
Wheel loader
Caterpillar966M
Call
Condition: new, power: 232 kW (315.43 HP), gearing type: mechanical, fuel type: diesel, fuel tank capacity: 313 l, emission class: euro3, Year of construction: 2016, operating hours: 18,000 h, Country of origin: Belgium
Displacement: 9,300cc
Dimension: 8,763 x 2,998 x 3,556
Bucket size: 4.2 Cubic Meter
= More information =
Dusdey Tygqspfx Ag Heu
Number of cylinders: 6
Empty weight: 23.200 kg
Engine type: Caterpillar C9.3 ACERT
Bucket volume: 4.2 m^3
Listing
United Arab Emirates
2,608 km
Chassis cab
IsuzuNPR 85K
Call
Condition: new, power: 96 kW (130.52 HP), fuel type: diesel, tire size: 7.50\16R12, axle configuration: 4x2, wheelbase: 3,820 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 6,350 mm, total width: 2,120 mm, total height: 2,250 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, = Additional options and accessories =
- Autoradio
- CD
- Twin wheels
= Remarks =
Cabin type: Single Cab
Djdpfx Aey Tygdeg Hjuu
Country of origin: Japan
Displacement: 2,999cc
Torque: 34Kg-m/ 1,600-2,600 rpm
Dimension: 6,635 x 2,120 x 2,255
Brakes: HYDRAULIC, DUAL CIRCUIT + DRUMS + ABS
Steering: LH
Construction: Chassis
PRE AIR CLEANER
FUEL TANK LOCK
REAR BUMPER
HEADER TRAY (DRIVERS & PASSENGER)
POWER WINDOW
EXHAUST BRAKE
REVERSE WARNING BUZZER
TYRE WEIGHT: 2,305 KG
STEERING: RECIRCULATING BALL & NUT TYPE WITH POWER ASSIST
SEATING CAPACITY: 2+1 Person
= More information =
Tyre size: 7.50\16R12
Suspension: leaf suspension
Number of cylinders: 4
Engine capacity: 3.000 cc
Empty weight: 2.305 kg
Carrying capacity: 4.200 kg
GVW: 6.505 kg
Listing
United Arab Emirates
2,608 km
Wheel excavator
DevelonDX210 WA
Call
Condition: new, power: 118 kW (160.44 HP), fuel type: diesel, fuel tank capacity: 350 l, emission class: euro2, Year of construction: 2025, = Additional options and accessories =
- Intercoolor
- Mp-3
= Remarks =
Country of origin: South Korea
Displacement: 5,800cc
Dimension: 9,470 x 2,500 x 3,490
Bucket size: 1.05 Cubic Meter
Arm length: 3 m
Duodpoy Tyf Tofx Ag Hou
Boom length: 5.6 m
Max dumping: 7250
Max digging: 6255
Track shoe: 600 mm
Attachments piping: Available
9.7-INCH MONITOR - Bigger LCD monitor with user-friendly touch screen panel
allowing easy access to machine settings and maintenance data
ALL ROUND VISIBILITY - Enlarged front shield assures best possible all-around visibility. Panoramic cabin windows andsuitable seat position assists on safety and controllability promotion via enhanced lower part of visibility on side position. Incrowded city streets or in hazardous construction workplace
operator can get better control and command of surroundings
SIMPLE MECHANICAL ENGINE - In-house mechanical engine with approachable structure
Engine bonnet equipped with wide open side panel
Fuel filler Pump
Steel Roof cover
Lower Wiber
Main Pumps: 2 variable displacement axial piston pumps
max flow: 2 x 231.7ℓ/min
= More information =
Drive: Wheel
Number of cylinders: 6
GVW: 20.800 kg
Tyre size on axle 1: 10.0-20-16PR
Tyre size on axle 2: 10.0-20-16PR
Tyre size on axle rear: 10.0-20-16PR
Bucket volume: 1.05 m^3
Listing
United Arab Emirates
2,608 km
Crawler excavator
HyundaiHX480 Crawler Excavator (Used)
Call
Condition: new, power: 327 kW (444.60 HP), fuel type: diesel, fuel tank capacity: 610 l, emission class: euro3, Year of construction: 2019, operating hours: 6,630 h, Country of origin: South Korea
Displacement: 12,700cc
Dusdpfx Ajy Tyf Hsg Hou
Dimension: 12,260 X 3,340 X 3,790
Bucket size: 2.2 Cubic Meter
Arm length: 3.38 m
Boom length: 7.06 m
Track shoe: 600
Attachments piping: Available
Overall Weight: 49.50 Ton
Bucket Capacity: 2.20 m3
Boom/Arm/Bucket: STD without Quick Coupler
with breaker line
= More information =
Number of cylinders: 6
GVW: 49.500 kg
Listing
United Arab Emirates
2,608 km
Chassis cab
IVECOT-WAY AT380T47H
Call
Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 13R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: air conditioning, cruise control, trailer coupling, = Additional options and accessories =
- Immobiliser
- Sun visor
= Remarks =
Cabin type: Active Time - Sleeper
Country of origin: SPAIN
Displacement: 12,900cc
Dimension: 9,100 x 2,550 x 3,100
Brakes: Disc Brakes (Front/Rear)
Steering: LH Drive
Construction: Chassis
Type: AT380T47H - SG64
Chassis Length: 6.56m
Shipping Dimension: L 9.1 x W 2.55 x H 3.1m
Capacity Liters: 290L
Rear Axle: HR-TP
Dodsy Tyfyjpfx Ag Heuu
Colour: 50105- White IC 194
Rear Overhang 1990mm
FMS Data Interface
Rear Multi Leaf spring 13 leaps
Front Reinforced parabolic suspension
Load 9000-32000
Rear Axle Ratio 4.67
Drive Tire 325/95R24
Electronic Brake System + Brake Assist System
Safety Hor. Filter Cartridge
Horizontal Air Filter
630cc air compressor
Standard air tank plating
Steel Air tanks
90A alternator
Air processing unit free discharge
Horizontal battery positioned on side frame
Standar Grey Plastic Part
Mechanical Cab Suspension
At low roof cab
Roof in standard color
Standard reverse
STD temp climate
Fabric air susp driver seat
Lower Exhaust Pipe
Engine Speed 1900 RPM
Steel front bumper
Front Anti Roll Bar
Rear Anti Roll Bar
Logistic Mode Off
Bulb Rear Light
Mechanical Battery Switch
Fabric sta 2 way Adj pass
PTO pre-equipment
Expansion Module
Engine Plate
Radiator Guard
Provision Radio and CB
Cross member D 120 KN
Revere Monotone Buzzer
Steel Wheels
Grey IC44 Chassis
Standard Equipment
MPH/KPH Speedometer
Soft Touch Steering wheel
Pre Heater
Tyre Inflation Hose
VIN Code check digit
Warning Triangle
Radice VIN WJM
STD setting c11/c13
1 bunk without protection net
Pre filter high performance transparent
ZF 16S 2520 TO GBOX
Standard H Lamps
Electronic Horn
Plates in ECC Language
Jacking Equipment
= More information =
Tyre size: 13R22.5
Suspension: leaf suspension
GVW: 41.000 kg
Listing
United Arab Emirates
2,608 km
Chassis cab
IsuzuFRR
Call
Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, tire size: 235/75R17.5 TUBELESS, axle configuration: 4x2, wheelbase: 4,860 mm, fuel: diesel, fuel tank capacity: 200 l, color: white, gearing type: mechanical, emission class: euro2, Year of construction: 2024, Equipment: air conditioning, central locking, = Additional options and accessories =
- Intercoolor
= Remarks =
Cabin type: Single Cab
Country of origin: JAPAN
Displacement: 7,790cc
Torque: 72kg-m /1450 rpm
Dimension: 8310 x 2200 x 2750
Brakes: Air over hydraulic with ABS and exhaust brake
Cab to end: 6,089 mm
Steering: LH
Construction: Chassis
GCC Standard options
Reverse Warning Buzzer
Header Tray - driver & passsenger
Truck Code: FRR34N
Steering: Tilt & Telescopic
power assisted
Seating Capacity: 2+1
= More information =
Tyre size: 235/75R17.5 TUBELESS
Number of cylinders: 6
Dujdpfoy Tyftsx Ag Hsu
Carrying capacity: 7.000 kg
GVW: 3.615 kg
Listing
United Arab Emirates
2,608 km
Chassis cab
AstraHD9
Call
Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 6x6, fuel: diesel, fuel tank capacity: 300 l, color: white, gearing type: mechanical, emission class: euro3, total length: 8,270 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2024, Equipment: air conditioning, = Additional options and accessories =
- Spare wheel
- Steering wheel adjustment
- Sun visor
= Remarks =
Cabin type: AD
Country of origin: Italy
Brakes: Drum Brakes with ABS and EBL
Steering: LH Drive
Construction: Chassis
wheelbase: 4100 + 1450 mm
Type: HD9 66.42
Rear Axle Rate: 5009
Chassis Length: 5950 mm
Shipping Dimension: 8275 x 2550 x 3500 mm
Rear Overhang: 1200 mm
Rear Differential Lock: Available
Reinforced Air Filter double stage
with air intake on the cab roof
Heated Fuel Filter
Standard Parabolic Suspensions (Leaf-Spring type)
with stabilizer bar on the 1st axle
Drum Brakes on all axles with ABS and EBL (Electronic Brake force Limitation) Systems
Standard Batteries Qty2 (180Ah each) with manual cut-off
Standard Alternator 90Ah x 28V (2520 W)
Air Suspended Driver Seat (adjustable) and Standard Passenger Seat (adjustable)
Electric Doors' Windows with tinted glass
Standard Manual Rear View Mirrors CE compliant
Radio pre-arrangement
Front Lights protection grids
Duedpfsy Tyfaox Ag Hju
Front Manouvering Hook (at center of front bumper)
Standard Tool Kit and Hydraulic Jack
Reverse Gear Buzzer
Anti-Roll Bar On 2Nd Rear Axle
Anti-Roll Bar On 3Rd Rear Axle
Reinforced Rear Suspensions
Front Reinforcing Plate For Front Drive Axle
Auxiliary Air Intakes On Left Side Close To Batteries
Provision For PTO Control
Reinforced Front Parabolic Suspension 9 Tons
Fuel Pre-Filter
Front Mirror
English Plate
Standard Front Hood (Same Color Of Cab With Logo In Black)
Rear Lights Protection Grids
Inflation Kit For Tyres: Hose + Air Gun + Manomenter
Wheel Chocks (Qty 2)
= More information =
GVW: 40.000 kg
Listing
United Arab Emirates
2,608 km
Chassis cab
ShacmanL3000
Call
Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, tire size: 295/80R22.5*7, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, fuel tank capacity: 200 l, color: white, emission class: euro2, suspension: steel, total length: 9,700 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2025, Equipment: ABS, power assisted steering, = Additional options and accessories =
- Daytime running light
- Hydraulic power steering
= Remarks =
Country of origin: China
Displacement: 6,750cc
Torque: 1600/1200-1600
Dimension: 9,700 x 2,500x 3,300
Brakes: Drum + ABS + With dual-circuit compressed air brake + Power spring brake acting on rear wheel
Construction: Chassis
wheelbase: 5700 + 2600 mm
Gearbox type: FAST 8JS85TM + PTO
2kg Fire Extinguisher
Hydraulic driver seat
Electric A/C Windows Curtains
Reverse Buzzer
Manual Cab Tilting
LED daytime
Running Lamps
L3000 Bumper
Oil Pan Protection
Fuel Lamps Protection
Extra Fuel Filter
Warning Triangle
Fuel Anti-theft System
Battery Anti-theft system
Gears: 8 forwards & 2 reserve shifts
Clutch Type: 395 diaphragm-spring type
Front axle: HANDE MAN 4800kg
Rear axle: HANDE MAN 15,150kg
Single reduction axle
Rear axel ratio:4.625
Brake system type: Drum
Service brake: With dual-circuit compressed air brake
Parking brake: Power spring brake acting on rear wheel
Steering Type: ZF8098 technology
integral circulating ball power steering
Chassis Frame: 850x250(7+4)
Double plates chassis frame
Dusdjy Tyfgjpfx Ag Heu
= More information =
Tyre size: 295/80R22.5*7
Brakes: drum brakes
Suspension: leaf suspension
Number of cylinders: 6
Engine capacity: 6.750 cc
Empty weight: 6.500 kg
Carrying capacity: 13.500 kg
GVW: 20.000 kg
Engine type: in-line
Listing
United Arab Emirates
2,608 km
Chassis cab
ShacmanF3000
Call
Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 12.00R24*11, axle configuration: 6x4, fuel: diesel, fuel tank capacity: 400 l, emission class: euro2, Year of construction: 2025, Equipment: ABS, air conditioning, Cabin type: SHACMAN F300 flat roof sleeper cab
Country of origin: China
Displacement: 11,596cc
Torque: 2000/1000-1400
Dimension: 10,500 x 2,550 x 3,300
Brakes: ABS Brake system type: Drum brake Service brake: With dual-circuit compressed air brake Parking brake: Power spring brake acting on rear wheel
Cab to end: 7,500
Steering: LH
Construction: Chassis
wheelbase: 4575+1400 mm
Gearbox type: FAST 12JSD200T-B PTO
Hydraulic driver seat
Hydraulic cab suspension
Reverse buzzer
Manual cab titling
Manual rear view mirror
Metal bumper
Oil pan protection
Fuel anti-theft system
Battery anti-theft system
Extra fuel filter
Front and rear light protection
Gears: 12 forwards & 2 reserve shifts
Max Input Torque (N.m): 2000
Clutch Type: 430 diaphragm-spring type
Rated RPM: 1900 RPM
Front axle: HANDE MAN 9500kg
Rear axle: HANDE MAN16000kg*2
hub reduction axle with inter-wheel differential and different lock
Dusdpfey Tyd Ajx Ag Hju
Rear axle ratio:4.769
Steering Type: ZF8098 technology
integral circulating ball power steering
Chassis Frame: 850x300(8+5)
double plate chassis frame
= More information =
Tyre size: 12.00R24*11
Number of cylinders: 6
Engine capacity: 11.596 cc
GVW: 9.400 kg
Listing
United Arab Emirates
2,608 km
IVECO T-WAY AT720T47TH truck tractor
IVECOT-WAY AT720T47TH
Call
Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 12.00R20, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories =
- Immobiliser
- LED headlights
- Spare wheel
- Sun visor
= Remarks =
Cabin type: Sleeper - Active Time
Country of origin: SPAIN
Displacement: 12,900cc
Gcw: 120 Tons
Brakes: Drum , Air Dual circuit
Steering: LH
Construction: Tractor Head
Headlamps Protection
Roof Rotating LED lights
7+7 Pin Trailer plug
Fuel Tank 680 LT
Pneum. Horn-Chassis
PTO pre - equipment
Curtains on door windows
2 lowered bunks w/o prot net
Heated Electric rear mirrors
rear dampers
Front multileaf susp
Loads 7500-13000kgs
Drive T. 12.00R20
EBS+BAS
Safety Hor. Filter cartridge
Horizontal air filter
630cc air compressor
Standard airtank plating
Steel air tank
90A alternator
Standard Gear mode 08329
APU free discharge
Horizontal batt side fram
Manuals EMEA APAC
STD Cab insulation
Standard grey plastic part
Mechanical cab suspension
Manual Cab Tilt
Dujdpfxoy Tydve Ag Hou
At lowroof cab
Roof in Standard color
Standard reverse
Temperate countries preparation
S Disp oper ped post
Fabric air susp driver seat
Limitation on cc
Lower exhaust pipe
Eng RPM = 1900 REV/
5th W EC POSI06139
Mounting Plate H=16MM
Rear anti roll bar
Filter HP TR/No heat
ZF 16S 2520 to GBOX
Standard Headlights
Plates in ECC languages
Jack
R. overhand 785mm
Bulb rear lights
Electronic Battery cut off
Emission Euro III
Fabric Sta. 2 way Adj Pass
Engine Plate
Radiator Guard
Provision Radio and CB
Rear suspension no spacer
Rear Axle ratio 4.23
Rear cross member
Rear Multileaf Susp
Rever Monotone buzzer
Steel wheels
Grey IC444 chassis
Standard Cab Trim
MPH/KPH speedometer
Speed limiter 90KM/H
Soft touch foam steering wheel
With stickers 79240
Aux. Chassis for 5th wheel
Pre heater
Trattam Prot STD
Towing version
Trye inflation hose
Vin Code check digit
Warning Triangle
Radice VIN WJM
STD Setting C11/C13
Tryes 12.00R20
5th wheel 3 1/2" + moun. Plate
Steel front bumper
Front Anti Roll Bar
= More information =
Tyre size: 12.00R20
Number of cylinders: 6
Engine capacity: 12.900 cc
Empty weight: 9.980 kg
Listing
United Arab Emirates
2,608 km
Delivery van
IVECODaily
Call
Condition: new, power: 107 kW (145.48 HP), fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, = Additional options and accessories =
- Daytime running light
= Remarks =
Cabin type: Day Cab
Country of origin: ITALY
Displacement: 2,998cc
Dimension: 7,274 x 2,052 x 2,938
Brakes: Disc Brakes (Front/Rear)
Steering: LH Drive
Construction: Cargo
Type: 50C15/E3 V
Front Axle: 2100 Kg
Rear Axle: 3700 Kg
Colour: 50105- White IC 194
Inside height : 2100 mm
Inside Length: 4680 mm approx
Internal width : 1740 mm
SLIDING SPARE WHEEL CARRIER
270 DEGREE REAR DOORS
DRIVERS AND PASSENGERS AIRBAG AND SEAT BELTS
170CC COMPRESSOR FOR AIR CONDITIONING
ALTERNATOR 180 A (12)
ACOUSTIC COMFORT KIT
SYSTEM ABS 9 / ASR 9
EXTRA THIRD KEY WITH REMOTE CONTROL"
MANUAL OPENING SIDE DOOR
ENGINE GEARS 3500
REAR MULTILEAF SPRING
GEARBOX 2840.6 O.D
LOADS 2100 - 3700Kgs
EURO 3 (HD)
2 SEAT BENCH WITH 3 POINTS SEATBELTS
STEEL WHEELS
REAR AXLE RATIO 4.44
REAR STEP
SUSPENSION STANDARD
STANDARD HEADRESTS
Dsdpfx Aoy Tydpjg Heuu
VAN REAR WALL WITHOUT WINDOW
CENTRAL PARKING BRAKE MANUAL
AUTORADIO PREPARATION
REAR VIEW MIRRORS FOR BODY WIDTH UP TO 2,200 MM
REAR AXLE RATIO 4.44
SPEED LIMITER 90KM/H
SIDE SLIDNG DOOR
OPEN STORAGE + USB (CHARGE)
STANDARD MODEL BADGING
ATERMIC GREEN TINTED WINDSCREEN
= More information =
Tyre size: 195/75R16
Suspension: leaf suspension
Engine capacity: 2.298 cc
Empty weight: 2.600 kg
Carrying capacity: 2.600 kg
GVW: 5.200 kg
Engine type: Iveco F1C
Listing
United Arab Emirates
2,608 km
Crawler excavator
New HollandTT.75 4WD Tractor
Call
Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories =
- PTO
= Remarks =
Country of origin: India
Displacement: 3,908cc
Torque: 257 Nm @ 1400 rpm
Dimension: 3,660 X 2,010 X2,400
Gearbox type: 8F + 2R partially synchromesh
No. of cylinders / aspiration: 4 / naturally
Capacity (cm³): 3,908
Bore x stroke (mm): 104x115
Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75
Max. torque (gross) (Nm@rpm): 257 @ 1400
Torque rise (%) 25
Transmission - 30 kph 8F+2R
constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection
Speed range (kph) 2.97-29.74
Optional with creeper (F+R) 12+3
Min. speed with creeper (kph) 1.03
Optional without creeper (F+R) 12+3
Speed range (kph) 2.14 - 31.85
Dedoy Tyc Sepfx Ag Houu
Flexion Bar lower link draft sensing Standard
Rear linkage category Cat. II
Mechanical lift with Lift-O-Matic™ Standard
Position
draft
mixed and float controls Standard
Main pump flow - Standard (lpm) 45
Steering pump flow (lpm) 28
Max. number of remote valves 2
Linkage
Maximum lift capacity at ball ends with no assist arms (kg) 1500
Maximum lift capacity at ball ends with assist arms (kg) 2000
Engine speed at 540 rpm (rpm) 1967
PTO activation mechanical
Turn angle 2WD/4WD (°) 52/38
Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200
= More information =
Number of cylinders: 4
GVW: 2.700 kg
Wheelbase: 216 cm
Listing
United Arab Emirates
2,608 km
Crawler excavator
JCB205LC NXT
Call
Condition: new, power: 103 kW (140.04 HP), fuel type: diesel, fuel tank capacity: 343 l, emission class: euro2, Year of construction: 2025, = Additional options and accessories =
- Alarm system
= Remarks =
Country of origin: China - JCB Factory
Displacement: 5,900cc
Dimension: 9,562 x 2,990 x 3,122
Bucket size: 1.02 m3
Arm length: 3 m
Boom length: 5.7 m
Track shoe: 600 mm
Attachments piping: Available
Structure: 3.7t Counterweight
Engine: Cummins 6bt 140 Hp
Cab: Mechanical suspension seat
7""Colourdisplay
Single Front wiper
Lighting:2xcab
1xboom
Electrics: Jcb intelicontrol
Other: Toolkit
Dodpey Tydiofx Ag Heuu
Refuelling Pump
Lc undercarriage
600mm Triple grouser track shoes 46l
Monoboom,Ohbcv's,3.0m Dipper
English Pack: English handbook
Hammer Pipework
1.02m3 Bucket
= More information =
Number of cylinders: 6
Engine capacity: 5.900 cc
GVW: 21.500 kg
Dimensions (LxBxH): 956 x 299 x 312 cm
Engine type: Cummins 6BT
Bucket volume: 1.02 m^3
Listing
United Arab Emirates
2,608 km
Telehandler
JCB540-170
Call
Condition: new, power: 74 kW (100.61 HP), emission class: euro2, Year of construction: 2026, Country of origin: UK
Displacement: 4,400cc
Gearbox type: 29kph, 4 Speed, 2/4 Wd Disconnect
Engine: Jcb 74.2kw 100hp,Tier 2
Transmission: 29kph
4 Speed
2/4 Wd Disconnect
Sway & Stabiliser Legs
Hydraulics: Gear Pump Hydraulics 170 Litres/Minuteute
Servo Controls Joystick
Carriage Tilt On Secondary Servo Lever
Jcb Sitemaster: 15.5-25
Type/Pattern: Hrc- Hot Climate
Load Speed Rating: 168a2
Inset/Outset: 32 Inset
Servo Joystick-1 Aux
Cab: Fully Glazed -Including Heater
Mechanical Suspension Seat: Fabric
Adjustable Back Rest Weight Fore/Aft
Q-Fit 'Clear View' Carriage - Manual Pin Lock
Language Pack: Middle East-English
English Operators Manual
Road Lights: Left Hand Dip With Fog & Reverse Light
Duodpfx Agey Tydcj Hou
Clear View Forks & Bar: 1067l X 100w X 50t
= More information =
Transmission: 4 gears
Engine capacity: 4.400 cc
Empty weight: 8.160 kg
Carrying capacity: 4.000 kg
GVW: 12.160 kg
Make of engine: JCB
Fork dimensions: 1,06 x 100 mm
Top speed: 29 km/h
Listing
中山市
3,578 km
Brand new - unused Multivac thermoformer
MultivacR245
Call
Condition: like new (used), Year of construction: 2021, Brand new Multivac R245 thermoformer. Has never even been connected. 560mm wide bed, various die with pack sizes as seen in photos. Includes; vacuum pump, trim bin, water chiller and Multivac CL230 labeller. Cost in excess of £500,000. Machine is currently in abroad, bought for a project which was cancelled. Due to land in UK in mid June.
Dodpjyz T H Tofx Ag Hjuu
Listing
China (People's Republic of China)
2,987 km
Gear grinder CNC machine
Gleason-PfauterP400G CNC Gear Grinder
Call
Condition: used, Year of construction: 2001, functionality: fully functional, wheel diameter: 350 mm, gear diameter: 400 mm, wheel width: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 600 rpm, workpiece weight (max.): 1,020 kg, total height: 3,048 mm, total length: 3,658 mm, total width: 2,590 mm, feed length X-axis: 440 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, rotational speed (min.): 600 rpm, pivoting range: 80 °, rotational speed (max.): 6,000 rpm, spindle bore: 80 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, travel speed (max.): 10,000 mm/min, workpiece diameter (max.): 400 mm, We offer this used Gleason-Pfauter P400G (400mm/800mm) CNC gear grinder machine, year of construction 2001.
Type: Gear Grinders
Model: P400G
Brand: GLEASON PFAUTER
Stock Number: GH1076
Serial # 28-727
Condition: Used
Year: 2001
Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder
Maximum Workpiece Diameter: 400 mm/800mm / 15.74”/31.48"
Maximum Grindable Profile Depth: 35 mm / 1.37”
Maximum Grinding Wheel Diameter: 350 mm / 13.77”
Maximum Grinding Wheel Width: 50 mm / 1.96”
Diameter of the Spindle Journal for Retaining: 80 mm / 3.14”
X-Axis Travel (Radial): 440 mm / 17.32”
Y-Axis Travel (Tangential): 200 mm / 7.87”
Z-Axis Travel (Axial): 400 mm / 15.74”
Maximum Grinding Head Pivoting Angle (+A-A): +/- 40°
Maximum Table Load: 10 kN / 2,248 Lbs.
Worktable Diameter: 380 mm / 14.96”
Worktable Bore: 80 mm / 3.14”
Tailstock Travel Distance: 650 mm / 25.59”
Tailstock Locating Bore: 90 mm / 3.54”
Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM
Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM
Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM
Tool Speed (Spindle-S): 600 to 6,000 RPM
Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM
Dresser Travel Distance (Z2-Axis): 200 mm / 7.87”
Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM
Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM
Dujdeyuqrrspfx Ag Hou
Maximum Dressing Wheel Diameter: 150 mm / 5.90”
Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height
Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height
Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height
If you have any questions or need more information, feel free to send us a message or give us a call.
Listing
Riyadh
3,341 km
Full protected laser cutting machine
BodorP Series
Call
Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine
Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands.
Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved.
The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting.
Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter.
Dsdpfx Ajhwhfisg Houu
The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value.
With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing.
Condition: New
Laser Type: Fiber Laser
Laser Power: 1500W - 30000W
Cutting Area: 3048*1524mm - 6100*2500mm
Cutting Speed: 0-169m/min
Positioning accuracy: ±0.03mm - ±0.05mm
Repositioning accuracy: ±0.02mm - ±0.03mm
Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT
CNC or Not: Yes
Cooling Mode: WATER COOLING
Listing
Vietnam
3,194 km
Economical Laser Cutting Machine
BodorA3
Call
Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Entry-level sheet fiber laser metal cutting machine
Lower laser cutting cost and easy operation
The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity.
The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting.
Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter.
Applicable Material: metal
Condition: New
Laser Type: Fiber Laser
Laser Power: 1000W, 1500W, 2000W, 3000W
Cutting Area: 3000*1524mm
Positioning accuracy: ±0.05mm
Repositioning accuracy: ±0.03mm
Cutting Speed: 0-100m/min
Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT
Duodpfx Agehv U U De Hou
CNC or Not: Yes
Cooling Mode: WATER COOLING
Trust Seal
Dealers certified through Machineseeker

Listing
Astana
3,455 km
Stationary concrete mixing plant
PROMAX Concrete PlantS130-TWN (130m3/h)
Call
Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S130-TWN
GENERAL
Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer
Plant Capacity : 130m³/hour freshly compressed concrete
Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete)
Total Motor Power : 168kw Standard Value can be changed depending on Equipment..
Voltage/Frequency : 380V/50Hz Standard Value.
The installation and startup of the plant is under our responsibility.
We provide excellent after-sales service.
24/7 SERVICES. REMOTE CONTROL SERVICE.
Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world.
* HIGHLY EFFICIENT AND DUPLICATE PRODUCTION
* EASY MAINTENANCE
* SUITABLE TO WORK UNDER HARD CONDITIONS
* ABLE TO PRODUCE RCC CONCRETE
DETAILS:
Compacted concrete capacity : 130 m³/h
Duedpjflz Idefx Ag Hsu
Air Compressor Capacity : 1300 lt/min
Aggregate Hopper : 4 Bins:4×30 = 120m³
Mixer Type : TWIN Shaft (3m³). 4500/3000 lt capacity
Aggregate Conveyor Band : 1000 mm * 32000 mm
Weighbridges: Aggregate/ Cement /Water/ Additives
OPTIONS:
*Cement Silo: 75-100-150-200-500 tons
*Cement Silo Equipment and Screw Conveyor.
Central Lubrication System Brand : ILC (made in italy)
Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3)
Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material
Discharging in Emergency Situations : manual Emergency Situation hand pump
Emergency Stop Button available.
Digital Mixer Control System (alarm)
Automatic lubrication system monitor feature on pc
Control System: Full automatic pc - plc – printer.
Unlimited users
Remote access
Unlimited prescriptions and customer registration
Retrospective reporting
English- Russian- French- Arabic-German-Spanish languages are available.
Switching materials used in the MCC dashboard are SIEMENS
Back off available.
Listing
Thành phố Hồ Chí Minh
3,126 km
Piston compressor
GTCC-171868
Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2AC-8100, overall weight: 18,000 kg, total length: 4,800 mm, total width: 4,000 mm, total height: 3,405 mm, space requirement length: 7,000 mm, space requirement width: 6,000 mm, space requirement height: 5,000 mm, motor manufacturer: HIGEN, power: 450 kW (611.83 HP), fuel type: electric, volume flow: 2,730 m³/h, operating pressure: 10 bar, pressure (min.): 7 bar, pressure (max.): 16.5 bar, ambient temperature (min.): 35 °C, ambient temperature (max.): 40 °C, type of cooling: water, input voltage: 6,600 V, input frequency: 50 Hz, Equipment: documentation/manual, This compressor has used for manufacturing high pressure air (10 bar).
I will sell this compressor with electric starting panel (Motor starting method : Reactor)
This compressor was not operated after O/Haul in 2024.
Dedpfxoy Tt Nls Ag Heuu
Listing
Dubai
2,491 km
Gas generator - MTU 12V4000L64FNER
MTU12V4000 GS Open type
Call
Condition: new, functionality: fully functional, fuel type: gas, power: 1,521 kW (2,067.98 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 10 pcs in stock
=Scope of supply=
Genset mtu 12V4000L64FNER, 400 V for operation with Natural Gas.
gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose.
set of sylomer stripes for genset foundation installation.
set of flexible connection for engine coolant circuit with flange connection
set of flexible connection for mixture coolant circuit with flange connection
set of exhaust bellows with flange connection and companion flange
set Maintenance-free starter batteries, mounted on base frame.
MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface
=Technical specifications=
Time for delivery - in stock
Engine type - mtu 12V4000L64FNER
Electrical power - 1521 kW
Engine speed - 1500 rpm
Electrical efficiency - 43.9 %
Total efficiency - 88.6 %
Alternator type - Leroy Somer LSA 53.2 VL6
Voltage - 400 V
Frequency - 50 HZ
< 500mg NOx at 5% O2
=Other information=
Dedpfxey Hcvbe Ag Hsuu
Production country - Germany
Listing
东莞市
3,596 km
Industrial robot
FanucM-710iC/70 R-30iB Plus
Call
Condition: used, Year of construction: 2020, Standard 70 kg payload multipurpose robot
Dusdozbgmljpfx Ag Hou
This innovative series of lightweight robots features a slim wrist, rigid arm and small footprint. Offering best payload and inertia in its category, this powerful 6-axis model is suitable for various applications and combines a 70 kg payload with extremely high axis speeds.
We help you find what you’re looking for
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
This may be of interest to you




































































































































































































