Used Bottero 520Lame 37 for sale (3,072)

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Ledpfxswnww Ne Abyern

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 551A 117, total width: 4,900 mm, total length: 6,100 mm, overall weight: 4,500 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 4,600 mm, BOTTERO LAMILINEA 551A - Year 1993 Max cutting length: 4600 mm Air cushion power: Minimum 200 mm water column Processable thickness range Monolithic: 3 - 10 mm Laminated: 3 + 0.38 + 3 (33-1) minimum, 8 + 4.56 + 8 (88-12) maximum Maximum carriage speed: 40 m/min - Max. cutting tolerance: +/- 0.5 mm Overall dimensions: 4900 x 6100 mm Weight: 4500 kg Ledpfx Abeyntq Rsyjrn Working table height: Adjustable from 900 up to 940 mm Installed power: 18 KVA Compressed air max. consumption: 500 NL/min

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 3 axes CNC work center for max. glass sizes : 3000 x 1500 mm 100 mm tool diameter with fix storage Lodjyw Hitepfx Abysrn condition very good .

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Ledpfxoxg Rhps Abyjrn

Condition: used, Year of construction: 2013, 3-axis system Max. glass dimensions: 1600 x 2600 mm Min. glass size: 100 x 350 mm Glass thickness: 3 - 19 mm Lrodpfjwmqrqex Abysn Hole/double-sided 16 compartments for 16 positions Length: 5850 mm Width: 5500 mm Max. Installation height of the system: 2200 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, year of last overhaul: 2022, The machine was completely overhauled in 2022! Lrjdpsyk Stpefx Abyjn TECHNICAL DETAILS Variable angle: 0-45°

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working height: 800 mm, feed rate X-axis: 6 m/min, workpiece height (max.): 30 mm, product length (min.): 40 mm, product width (min.): 40 mm, TECHNICAL DETAILS Glass thickness: 3 - 30 mm Minimum size: 40 x 40 mm Feed speed: 0.6 - 6 m/min Working height: 800 mm MACHINE DETAILS Electric power: 22.5 kVA (18 kW) Dimensions & Weight Dimensions: 8,100 x 1,400 x 2,700 mm Weight: 2,700 kg EQUIPMENT 2 diamond wheels for straight edge 1 diamond wheel for rear edge 1 polishing wheel for rear edge 1 diamond wheel for front edge 1 polishing wheel for front edge Lredsw Sli Tjpfx Abysn 2 flat edge polishing wheels Grinding water tank with pump

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 7,700 mm, total length: 19,300 mm, Year - 2016 Model - 630 CBM and 353BCS-R Lrodpeyc Uq Ijfx Abyen 4 station double loader Cutting , grinding, marking and breakout. Tilt function Shape scanner Perimeter fencing for loader Delivery and Installation available.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 6,490 mm, total width: 3,220 mm, Bottero CNC Year - 2022 Model - Pratica Plus 3300 Automatic tool changer Complete with all tooling and spares Excellent condition as it has done minimal work Lrodpfx Asydbigobyon Delivery and Installation available.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer for sale a high-quality UNTHA LR 1000 industrial wood shredder, in almost new condition, having been used only for approximately 1 hour of testing operation. This machine is a reliable and efficient solution for processing wood waste such as offcuts and solid wood materials, delivering consistent output size and excellent performance. Key Features & Benefits Condition: Practically new – only test run (~1 hour) Brand: UNTHA (Austria – premium shredding technology) Model: LR 1000 Robust industrial design for long-term operation High throughput capacity: approx. 600–700 kg/h (beech offcuts) Uniform output size: approx. 40 mm (30 mm screen installed) Ideal for woodworking companies, carpentry shops, and recycling operations Technical Specifications Material Input Max. input size: approx. 600 × 120 × 55 mm Feed system: tipping box approx. 1.0 m³ Moisture content: < 11% Metal content: not allowed Machine Performance Main drive: 2 × 18.5 kW Hydraulic power: 1.1 kW Rotor speed: 98 rpm Throughput: approx. 600–700 kg/h Cutting System Rotor diameter: 300 mm Number of knives: 27 pcs Cutting system: UNTHA cutter system Screen size: 30 mm Electrical & Control Voltage: 400 V / 50 Hz Control system: Siemens SIMATIC S7-1200 (CPU 1214) Dimensions & Weight Ljdpfjzgr Htox Abyern Machine dimensions: approx. 1,704 × 1,863 × 1,630 mm Infeed opening: 1,000 × 1,050 mm Total weight: approx. 2,400 kg Included Equipment 45° machine configuration (improved feeding of bulky material) Horizontal discharge screw conveyor (closed design) Full bin indicator with automatic stop Machine support legs (~100 mm) External interface contact

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Lodpfx Ajzdny Rjbyjrn Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: Lredpfx Absq A Um Rsysn with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Lodpfx Absyhq Awoyjrn Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: new, GMN TSE 240cg-5000 / 37 382459 Mounting grinding spindle = 37 kW, new price was over €40,000!!!, unused, 100% functional, scope of delivery as shown in the photos. Lrjdpfxsi Eaa Ao Abyon

Condition: new, Heidenhain LC 182 length measuring system, ML 1540 mm, . 387092-37, serial number: 21472776K, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Lodpfxji Eakze Abyjrn

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle 384124, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Lodpji Eaamofx Abyern

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle 384126, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Lrsdpfx Aji Eaaxobyen

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 RPM / 37 grinding spindle, shaft diameter: 130mm, front overhang at the thread: 102mm, including test report and installation instructions, new condition: €25,000, unused, 100% functional, scope of supply as shown in the photos. Lodji D U Tropfx Abyorn ATTENTION: Please request the costs for packaging and shipping separately!

Condition: ready for operation (used), Indramat 2AD160C-B350A2-BS03-B2V2 Motor - 236 NM / 1500/6000UPM - 37 / 53KW,used, minor signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lredpfjt Adpfjx Abyjn

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle SN:384125, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Lsdpfx Asx Dwqfobyern

Condition: used, functionality: fully functional, For sale is an Oerlikon bevel/worm gear unit of the E 37 EX 2 series, serial number 828499L01.1. The unit comes from a fully functional installation and is suitable for test benches, special purpose machines, and industrial drive applications. Technical specifications (general): Manufacturer: Oerlikon Type: E 37 EX 2 Design: Bevel/worm gear unit Application: Test bench technology, mechanical engineering, industrial drives Condition: used, functional Lodpfeypb Iyex Abyern

Condition: used, TECHNICAL DETAILS - Bar diameter : 10 - 80 [mm] - Bar length : 3700 [mm] - Adjustable bar feed speed : 980 [mm/sec] Ledpfswa D Sksx Abyorn - Max. scrap length : 110 [mm] - Loading time : 32 [sec] - Max. bar weight : 180 [kg] - Oil filling : 115 [l] POWER SUPPLY - Supply voltage : 230 / 400 [V] - Total installed power : 3 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4792 x 1570 [mm] - Machine height : 2000 [mm] - Machine weight : 1880 [kg] EQUIPMENT - UP Magazine

Condition: excellent (used), Year of construction: 2018, operating hours: 296 h, fuel type: electric, Year of manufacture: 2018 Drive: Wheel GVW: 7.466 kg Mast: articulated arm Lifting capacity: 227 kg Working height: 2.020 cm CE mark: yes Technical condition: very good Visual appearance: very good Genie Z-60/37 DC – Year 2018 | Only 296 Operating Hours | Valid Inspection Lrodpjzggfwefx Abyjn For sale: a well-maintained Genie Z-60/37 DC from 2018 with only 296 operating hours. This fully electric articulating boom lift is ideal for applications requiring quiet, emission-free and efficient operation, both indoors and outdoors on firm surfaces. With a working height of approximately 20 metres (66 ft) and a horizontal outreach of approximately 11 metres (36 ft), this machine delivers excellent performance for a wide range of access applications. The electric drive system ensures low operating costs, reduced maintenance requirements and environmentally friendly operation. The machine is in excellent condition, has exceptionally low operating hours and comes with a valid inspection certificate. Ready for immediate use. Key Features: Year: 2018 Only 296 operating hours Valid inspection Working height: approx. 20 m Horizontal outreach: approx. 11 m Fully electric drive system Quiet and zero-emission operation Excellent condition Ready for immediate deployment An excellent opportunity to acquire a fully electric Genie boom lift with exceptionally low operating hours. Contact us for more information or to arrange a viewing.

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Lredpsvdcc Rofx Abyen Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Lrsdpeyx Tnrofx Abysn Compressor station, soundproof container with 2 compressor units 2 pieces SPX Hankison GmbH, type HHL 450 – a desiccant air dryer for industrial compressed air systems. It is used to remove moisture from compressed air so that machines, valves, or pneumatic systems do not corrode or freeze. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers *