Used Bruderer Automatic Punching Press for sale (33,015)

Condition: used, Year of construction: 1985, pressure 25 t Godpjvu E I Dsfx Aiaeiu no. of strokes 1500 Hub/min total power requirement 20 kW

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Godpfx Ast Hwz Neiasiu Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Press force: 5,000 kN Stroke adjustment: 97–400 mm Godpfx Aijzccfmoajiu Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Table area: 3,000 x 1,400 mm Motor power: 90 kW Press weight: 120,000 kg Including transfer and coil line.

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Ram adjustment 175 mm Installation height 550-800 mm Table surface 2,500x1,600 mm Ram surface 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Strip feed system EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Gisdpfx Aijzccd Njasu Max. coil weight 7,500 kg Transfer system GT-X500-Y200-Z100 DX stroke (feed) 578 mm DY stroke (closing) 300 mm DZ stroke 600 mm Z adjustment (table bottom edge) 50-650 mm Clearance 400-1000 mm

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm TOTAL STROKES: 1,000,000 strokes NORDA Transfer X-axis travel: 0 - 1,200 mm Godpfx Aiozb H Shjaeiu Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: excellent (used), Complete screen printing line with all this included : CAROUSEL PRESS , CONVEYOR DRYER , FLASH CURE UNIT , AIR COMPRESSOR , and 200 ALUMINUM FRAMES . Suitable for professional textile printing and high-volume production. M&R’s Sportsman EX automatic textile presses offer exceptional value and quality at an amazingly affordable price. Sportsman EX 1618 is available in 6, 8, and 10-color models with a maximum image area of 41 x 46 cm (16" x 18"). Sportsman EX 2020 is available in 6, 8, 10, and 12-color models with a maximum image area of 51 x 51 cm (20" x 20"). Gjdpfxszcuzts Aiajiu

Condition: new, Combined hydraulic shear with two independent pistons, punching station with mechanical stop and adjustable piston stroke, notching, shearing of plates, bars and profiles with adjustable stop with automatic cutting control, double pedal board, centralized lubrication system, working light. Machine supplied with safety guards according to CE rules, CE conformity declaration, user manual. Power : Ton 85. Engine power : Kw 7.5 Dimensions : mm 1.920 x 950 x 2.040 ( L x W x H ). Weight: 2.315 Kg: 2.315 Kg PUNCHING : Punching capacity : mm Ø 33 x Thickness 20 mm. Recess depth: mm 355. Punching stroke : mm 80. Working height : mm 1.080. SHEARING : Plates : mm 380 x 20. mm 480 x 15. Length of blades : mm 482. Round bars : mm Ø 50. Square bars : mm 50. 90° corner profiles : 150 x 150 x 15 mm. Angle profiles at 45°: mm 80 x 8. SKIRTING : Max thickness : mm 13. Width : mm 52. Depth : mm 100. Working height : mm 940. Godpfxsggbt So Aiajiu

Condition: new, New in Ready for delivery except for the sold. Combined hydraulic shear with 5 working stations, punching station with mechanical stop and adjustable piston stroke, notching, shearing of plates, bars and profiles with adjustable stop with automatic cutting control, foot pedal, centralized lubrication system, working light. Machine supplied with safety guards according to EC regulations, EC declaration of conformity, user manual. Power : Ton 45. Engine power : 4 Kw. Dimensions : mm 1.450 x 900 x 1.450 mm ( L x W x H ). Weight : 1.215 Kg PUNCHING : Punching capacity : mm Ø 22 x Thickness 15 mm. Recess depth: mm 175. Punching stroke : mm 50. Working height : mm 935. SHEARING : Plates : mm 200 x 15. mm 300 x 12. Length of blades : Gisdpogygfvofx Aiasu mm 316. Round bars : mm Ø 30. Square bars : mm 45. 90° corner profiles : 100 x 100 x 10 mm. 45° corner profiles mm 70 x 70 x 6 SKIRTING : Max thickness : mm 8. Width : mm 35. Depth : mm 75. Working height : mm 935.

Condition: new, SAHINLER HKM 65 hydraulic punch-cutter Exerted power : Ton 65. Engine power : Kw 5.5 Dimensions (mm) : mm 1.700 x 900 x 1.670 ( L x W x H ). Weight: 1.600 Kg: 1.600 Kg PUNCHING : Punching capacity : mm Ø 2 x Thickness 20 mm. Recess depth: mm 305. Punching stroke : mm 55. Working height : mm 1.030. SHEARING : Plates : mm 300 x 20. mm 375 x 15. Length of blades : mm 380. Round bars : mm Ø 45. Square bars : mm 45. 90° corner profiles : 120 x 120 x 12 mm. 45° corner profiles: mm 70 x 70 x 10 SKIRTING : Max thickness : mm 10. Width : mm 45. Depth : Gsdpfxjggbuhj Aiajiu mm 90. Working height : mm 900.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 41,000 h, functionality: fully functional, FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51  mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Gjdpowpg Rbjfx Aiasiu Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 190 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Condition & Delivery: Machine in excellent technical and visual condition Fully serviced and tested Immediate availability from Europe Worldwide shipping & installation support available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Gedpfxjzcpv Ss Aiasiu Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1985, pressure 25 t Gisdpfxszbu Spj Aiaeu

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 100377, table length: 860 mm, table width: 600 mm, overall weight: 5,000 kg, stroke rate (max.): 300 1/min, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates prompt collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Godpoza Tdnjfx Aiasiu Strokes: 60 – 300/min Table dimensions: 830 mm x 600 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,500 x 2,400 mm Machine weight: 5,000 kg EQUIPMENT Press force measuring device (Model: GERLACH PKV 100) External reference: 66

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles Giedpfx Asu Icyhjiaou - foot operation - pneumatic air gun AND - drilling automat for window construction application: - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Condition: used, Year of construction: 1974, Technical details: pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm strokes per minute: 20 - 120 stroke: ca./approx. 20 mm mm adjustment of stroke: nein/ no stroke adj. mm dayligth: Arbeitsraum: 220 - 280 mm Table surface area useable: 600 x 600 mm total power requirement: 7,5 kW Gisdpfx Asu Icx Reiaeu weight of the machine ca.: 5,0 t dimensions L x W x H: Maschine: 1,8 x 1,2 x 2,7 m Dimensions (LxWxH): Schaltschrank: 0,92 x 0,46 x 1,4 m Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm *

Condition: used, Technical details: Giedpfx Aieu Icw Hoaou punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press *

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Giodpfx Aszab Ibsiaju Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Year of construction: 1995, operating hours: 42,416 h, functionality: fully functional, machine/vehicle number: 10317, total height: 3,100 mm, feed length X-axis: 120 mm, ram adjustment: 64 mm, table height: 1,250 mm, pressing force: 50 t, stroke length: 16 mm, stroke adjustment: 51 mm, clearance between the columns: 1,200 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 50 UL, a high-performance stamping press designed for precise and reliable results in series production. Thanks to its continuous operation, the machine is in technically perfect and immediately operational condition. All maintenance and repair work has been carried out regularly and carefully. Technical data: Rated force: 500 kN Stroke rate: 100-1120 strokes per minute Gsdjyu Sn Ispfx Aiajiu Feed: BBV 202/120 Adjustable stroke: 16 - 51 Installation space / clamping plate: 760-940 mm Main drive // kW: 22 kW Power connection: 400 V / 50 Hz Adjustable stroke: 16-51 Ram area: 980 x 420 mm Table area: 940 x 580 mm Adjustable strip entry height: 50-140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 2700 x 1800 x 3100 mm Weight: 8150 kg "Main drive on (actual operating time): 42,416 hours Optionally, a soundproof cabin can be purchased.

Condition: used, Year of construction: 1994, operating hours: 28,067 h, functionality: fully functional, machine/vehicle number: 10000, total height: 3,460 mm, feed length X-axis: 200 mm, ram adjustment: 76 mm, table height: 1,200 mm, total width: 1,750 mm, total length: 1,840 mm, table length: 970 mm, table width: 910 mm, stroke length: 16 mm, stroke adjustment: 63 mm, clearance between the columns: 1,230 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 80H, a proven and high-performance stamping press for maximum precision and reliability in series production. Due to its continuous use in production, the system is in technically perfect and operational condition. Maintenance and servicing have been carried out regularly. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Application: High-precision stamping in series production Condition: Technically perfect, immediately ready for use Availability: By arrangement / from week 17/2026 An optional soundproof cabin can be purchased. Technical details: Rated force: 800 kN Stroke rate: 100-1000 strokes per minute Feed system: BBV 320/200 Giedpfeyu Nipex Aiasu Adjustable stroke: 16 - 63 Installation space / clamping plate: 970 mm Main drive // kW: 43 kW Power connection: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip feed height adjustable: 80 mm - 180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: 15550 kg

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, Gjdpetty Nkofx Aiajiu the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: excellent (used), Year of construction: 2012, working area X .. 370 mm working area Y .. 700 mm Gijdpfx Aoy Umdfeiasu pressure 28.0 t plate thickness max. 12.7 mm ST throat 310 mm height of stroke 0 - 40 mm no. of strokes max. 180 Hub/min punch diameter max. 105 mm 845 x 1420 mm work height max. 900 mm oil volume 50.0 l total power requirement 5.0 kW weight of the machine ca. 1800 kg range L-W-H 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 euros Special price on request !! The machine was used continuously in a test area and as a result has very few operating hours !!! The ECCO LINE hydraulic punching machine has been specially optimized for the processing of sheet metal and profile parts. It is characterized by its The machines of the ECCO LINE series are equipped with a punching force of LINE series are equipped with 28 tons of punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 sec (manual) Mode of operation: After installing the tool, the stops are positioned in X and Y are positioned accordingly and the material is pushed against the stops. By the hole is then punched by pressing the foot pedal Features of the machine: - Maintenance-free hydraulic drive - Stepless stroke adjustment - Compact unit - Constant punching force Features: - Robust electro-hydraulic hole punch - TRUMPF tool system with many insert tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * Scanning head integrated in the stops * Energy guiding chains for supply line to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Stake-out device for zeroing the axes * Readout accuracy /- 0.1 mm - Control panel: set-up, single and continuous stroke - Stepless stroke height adjustment - Free-moving foot switch * with many punching tools !

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process. Gjdpsy I Tq Ssfx Aiasiu

Condition: good (used), Year of construction: 1966, Original Heidelberg hot foil stamping unit Gedpfx Aiey Ahmdjajiu

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Gedpexduclsfx Aiaoiu Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, Year of construction: 1994, punching pressure:20 t Giedpfx Aioh Ra Rnsaeu total power requirement:4 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:3,2 x 1,4 x 1,45 m punch diameter:max. 105 mm sheet thickness - max.:6 mm stroke length max.:25 mm voltage:380 V frequency:50 Hz connected load:4 kVA punch diameter:105 max. mm input unit:0,01 mm