Used Concrete Pipe Machine for sale (65,603)

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Bwjdpfx Apohrkrpjcen Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm Bwjdpfx Apowbi Hcjcen bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Bsdpfxeyi Hrwe Apcjwn Weight: approx. 2 tons Good condition

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm Bwsdpfeyv Nwqex Apcjn square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: Bjdeyv Nniopfx Apcown - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation Bodpfx Apeyv Nk Rocown - CE mark / Declaration of Conformity - Operating instructions in German

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding Bedpfx Apsyt Ifgjcjwn • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: Bwsdpfx Apjym Unzecsn GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: used, functionality: fully functional, Professional pipe bending machine with hydraulic drive. Suitable for steel pipes, stainless steel, and possibly thick-walled copper pipes. INCLUDES a wooden crate with a comprehensive set of bending dies/bending segments (see photo) – this is what gives it its real value, as bending segments are very expensive when purchased new. Ideal for heating engineers, plumbing companies, steel pipe construction, plant engineering, and training workshops. With the included set, various diameters can be bent directly. Technical data: Bsdpfx Ajzab Emopcown - Type: hydraulic pipe bending machine, stationary unit - Drive: three-phase 400 V / hydraulic unit - Bending dies: comprehensive set available (wooden crate, see photo) - Construction: steel frame, mobile/stationary - Application area: typically pipe OD 20-60 mm (verify on-site) - Year of manufacture: approx. 1980s-1990s Collection/transport: Self-collection with a forklift. Loading on-site is possible. Shipping via freight forwarder on a pallet can be arranged.

Condition: new, functionality: fully functional, Year of construction: 2026, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Bjdpfjhwrhiox Apcswn

Condition: new, 40 mm 8,5 U/min 120 mm Bwjdpjy H N I Dsfx Apcen roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Equipment / Accessories: Bedjy H N Ikspfx Apcswn - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz Bwodpfx Apoy H N H Tjcen hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles Bwsdpfx Apey H N H Hocsn

Condition: new, 80 mm roll diameter 260 mm 7 U/min 170 mm 27 kN 160 mm 450 mm Bwsdsy H N Hyopfx Apcen total power requirement 3,7 kW dimensions 980x1430x1600 mm weight 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW Bjdpsy H N Hmsfx Apcjwn range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, roll diameter 350 mm 110 mm bending speed 1-5 m/min Bending capacity 157 Wcm³ total power requirement 7,5 kW weight of the machine ca. 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable Bwjdey H N Hgspfx Apcen - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel

Condition: new, 50 mm Bwsdpfxjy H N Has Apcon 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW weight 495 kg range L-W-H 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage

Condition: new, roll diameter 215 mm shaft diameter 60 mm Shaft revolutions 6 U/min 100x2 mm 80x15 mm pressure hydraulic cylinder 180 kN total power requirement 2,2 kW weight 720 kg dimensions 1200x900x1700 mm Accessories / Equipment: - Three driven rollers Bwodpfx Asy H N E Aopcon - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, shaft diameter 60 mm Shaft revolutions 6 U/min roll diameter 215 mm Bodpoy H N Evjfx Apcewn pressure hydraulic cylinder 180 kN dimensions 1125x870x1620 mm weight 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven Bjdpfx Asyvvnispcswn - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width Bedporr Ungofx Apcown 2200 mm height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, functionality: fully functional, color: white, overall weight: 25,000 kg, operation weight: 30,000 kg, Year of construction: 2024, machine/vehicle number: 15362024021, ZIM 1536 machine is a high-end machine designed for the production of concrete blocks, concrete paverstones and concrete curbstones. ZIM 1536 comes out with high-end hardware, wide options of production and low labor cost. It can be used in automatic facilities such as FINGER CAR, BASKET SYSTEM, L TYPE SYSTEM. Bwedpsfnz Uzofx Apcen Our machine that can produce 15 blocks or 36 paverstones in one press, is designed to produce 1200-1400 pallets per day. Aiming at maximum capacity with mass production, our machine is designed to work non-stop! Our machine, which can follow the mortar in machine with the loadcell system in the bunkers, takes you to the next level with the proportional mortar car movement, and reaches the maximum quality with the mold balancing and pressing system, is a pioneer in the sector with its many hardwares! Our machine which uses pneumatic system in the mold connection system, can perform the mold change process in 15 minutes. For the mold changing process, the machine body is separated from the press side on the rails, and all body height adjustments are made automatically. We are using “ VIBROSTAR ” oil bathed vibration systems in our machine. The oil bathed vibrations are also cycling the oil automatically and we keep the vibration süper cool always! We use 6 engines and total 33kW energy. This vibration engines are shaft connected to our special vibration system. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service.

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW Bsdpfx Apoiau Uujcewn weight of the machine ca. 6 t

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm bending capacity - flat iron 80x15 mm Bsdpfx Apey H N Rfecewn Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm weight 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working