Used Debus Dds 118 for sale (866)

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Dksdpexqrbxofx Aptet Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Connected load: 2.4 / 3.7 kW Required space: approx. 1.0 x 0.5 x 1.2 m (L x W x H) Transportation and loading can be organized Europe-wide on request and for an additional charge. Dodjzvnhxopfx Aptskt Prices are subject to VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell your equipment? For further information or contact options, you can reach us via the contact form.

Condition: excellent (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 800 x 8 mm -Inside: Ø: 80 mm -Hole circle: Ø 120 x 22 mm / Ø 160 x 26 mm -Number of teeth: 118 teeth -Weight: 20 kg Djdpfx Apsvy Umtstokt

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 330 mm -Drum: Ø 118 mm -Hole: Ø 30 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 118 x 385 mm Dsdpfx Apovxp Hxjtskt -Weight: 11.3 kg/piece

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 250 mm -Drum: Ø 118 mm -Hole: Ø 30 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 118 x 310 mm -Weight: 9.7 kg/piece Dodpjvxp Ddofx Aptokt

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm milling-head swivable +/- 180° work height max. 945 mm turning speed range 0 - 1400 U/min engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : Dkedpoxab Hpjfx Aptot - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: new, Siemens SIVACON 8PS BD2C-1250-EE-KR-EBAL / BD2-1250-KR BVP: 611109 End Feed SN118446, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Dkedozzh Ayepfx Aptst

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. Dkodpfxevnmnre Aptet max. workpiece diameter: 250 mm

Year of construction: 2014, condition: ready for operation (used), A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible. Dkjdpfx Apjyxq Uistjt

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1100-WTBTB The Series 22-1100-WTBTB, with a passage width of 1100 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, waterjet-cut, or plasma-cut parts thanks to its 3 stations. The belt grinding station allows for the removal of burrs and raised edges. Subsequently, the edge is deburred and slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for the belt and brushes, the machine can be reconfigured in just a few steps. Dsdpfx Asznlxrsptekt The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: excellent (used), CASTELO Industrial Mussel Debearding Machine – Stainless Steel CASTELO industrial mussel debearding machine, designed for the continuous removal of the byssus or beard from fresh mussels within industrial processing lines for mollusks. The machine is designed for professional seafood processing plants and can be integrated into existing lines for washing, cleaning, debearding, grading, and packaging of mussels. The equipment removes the external filaments or byssus attached to the mussel, preparing the product for the next stages of washing, inspection, sorting, cooking, or packaging. MAIN FEATURES -Manufacturer: CASTELO -Type: Industrial mussel debearding machine -Application: Fresh/raw mussels -Function: Removal of mussel byssus or beard -Continuous industrial operation -Robust construction in stainless steel -Designed for humid environments in seafood processing -Open and accessible construction to facilitate cleaning and maintenance -Integrable into existing mussel processing lines -Designed for professional use in the seafood industry APPLICATION The machine is designed to be installed in the preparation area of an industrial mussel processing line. Fresh mussels enter the machine and pass through the debearding section, where the filaments known as byssus or beard are removed. Once processed, the mussels can automatically continue to the next stage of production. It can be combined with: Mussel washers Cleaning equipment Inspection belts Graders/sorters Cooking systems Packaging equipment Dsdpfxozwvx Uo Aptjkt APPLICATIONS A particularly interesting solution for mussel processors, seafood plants, seafood industries, and mollusk packaging companies looking to automate or expand their fresh mussel preparation lines. Its stainless steel construction makes it especially suitable for work environments with continuous exposure to water and seafood. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dodpfx Apezcv Stetokt Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Year of construction: 2006, condition: ready for operation (used), A Bütfering metal deburring machine is offered for sale. Maximum working width: 1350mm, feed speed: 20m/min, processing stages: 3, 1st processing stage: abrasive belt, 2nd processing stage: 2 rows of cup brushes, 3rd processing stage: polishing belt, minimum and maximum workpiece thickness: 0.5mm/100mm, maximum material thickness: 100mm. Including one damaged conveyor belt and abrasive belts. Machine dimensions: 2000mm/2050mm/3400mm, weight: approx. 6000kg. Inspection possible by appointment. Dkedpfx Apszl U I Dotot

Condition: refurbished (used), Year of construction: 2014, operating hours: 2,187 h, load capacity: 1,800 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,350 mm, fork length: 1,150 mm, empty load weight: 334 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and refurbished. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test on site and get individual advice—we’ll find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Model: Low lift pallet truck EJE 118 Drive type: Electric Load capacity: 1,800 kg Year of manufacture: 2014 Dksdpfoy Rpbrex Aptot Operating hours: 2,187 Lift height: 122 mm Mast type: None Initial lift: Yes Length: 1,800 mm Width: 800 mm Height: 1,350 mm Fork length: 1,150 mm Unladen weight: 334 kg Load center: 600 mm Tyres: Polyurethane Model type: EJE 118 Battery type: PzS Battery weight: 222 kg

Condition: excellent (used), I sell the pump FEZER 016-118 94213 Dodpfxoud Ryre Aptskt - Pump in bdb condition. - Capacity 16m3/H

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBTS 651/3 Overall dimensions: 2260 x 1870 x 1450 mm Dkodpfx Apozka Dzotet Year: 2008 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1340 mm Torus Ø: 430 mm

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Dkedpfxjwfg Huo Aptet

Condition: ready for operation (used), Year of construction: 2007, Nilfisk CFM 118 industrial vacuum cleaner Vacuum cleaner Vacuum cleaner Year of construction: 2007 Dsdpfx Aeqy Ezgeptskt 1 kW Weight: approx. 28 kg Air flow rate: approx. 45 l/sec Tank capacity: 25l You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 1991, machine/vehicle number: B II 17-5680, Offer 26901 Technical data: - Brush diameter: 250 mm - Brush width: 60 mm Dksdpfx Aezrvxwoptjt - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Adjustable height support table - Working height: 900 mm - Space requirement: approx. W 720 x H 1150 x D 450 mm - Weight: approx. 180 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Dodpfjk E Tdajx Aptjkt Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: ready for operation (used), Indramat DDS 3.1-W030-D controller, SN:255497-02024, the controller has been factory overhauled by the manufacturer, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dkedox Dw Eijpfx Aptot

Condition: good (used), machine/vehicle number: 17230, Year of construction: 2016, operating hours: 2,263 h, load capacity: 1,800 kg, lifting height: 2,100 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,520 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 787 kg, 5214834 Serial Number: 90497457 Dkjdpfx Aozigpbsptst Battery Details: 24V 2PzVB 142Ah

Year of construction: 2007, condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Dkjdjtul N Dspfx Aptjt

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in Dodpfx Aot Hw N Heptekt mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Tanos Systainer - 118 pieces - printed with Festo lettering - approx. dimensions - External dimensions H 112 x W 396 x D 296 mm Dksdpfx Apew Upnletot - Internal dimensions H 71 x W 389.5 x D 275 mm - Shipping available at extra cost