Used Drumag Gmbh Flow Valve for sale (72,963)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Hjdez Agw Ejpfx Aaheu Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Hjdpfx Aaoz Ag Rrjhsu Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Hsdpfszqucfsx Aaheu Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW Hjdot S Rduspfx Aaheu

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, Fiber optic optical inspection system with various endoscopes, as shown in the attached photos. Hjdsz Dicqepfx Aahju

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Hsdpfx Aszz Rpcjahsu - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg Hjdpfx Aajz Ap R Ieheu • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Hsdpjzwmr Esfx Aahju Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11H82290, Exercise Book Manufacturing Machine E.C.H. WILL GmbH / Model Alpha RF (manufactured in 2012) For the production of finished exercise books with pre-printed covers Technical Data Mechanical paper web speed/minute: max. 300 m Working strokes/minute – converting section: max. 60 At 4-up production – books/hour: max. 14,400 Reel width: max. 960 mm / min. 580 mm Reel diameter: max. 1,200 mm Printing length (cylinder circumference): max. 670 mm / min. 300 mm Cut-off length – cross cutter: min. 300 mm For exercise book production: max. 500 mm For skid production: max. 670 mm Adjustment steps: 5 mm Number of cuts/minute – cross cutter: max. 1,000 Finished article size range (unbound side x bound side): max. 245 x 480 mm min. 145 x 145 mm Sheet count: min. 5 / max. 50 Article thickness (unfolded): max. 5 mm Main Equipment Reeling Units • 2 x shafted reeling units Ruling Tower • 1 x ruling tower for a maximum of 4 ruling inkers Note: The ruling tower is equipped for either: • 2-color ruling from 1 web, or • 1-color ruling from 2 webs Longitudinal Perforating Unit (for 1 web operation) Hjdpfx Aajzq Av Tohju • 1 x longitudinal perforating unit Cross Cutting Unit • 1 x 1-knife cross cutting system allowing quick and easy knife exchange and adjustment Anti-Static System • Anti-static equipment for paper handling Sheet Overlapping Device • 1 x sheet overlapping device Sheet Counting and Collating Unit • Sheet counting and collating system Cover Feeders (1st / 2nd / 3rd / 4th Cover Feeder) • Will automatic feeder for pre-printed covers Deep Pile Delivery • Deep pile delivery unit, in-line system for collecting large size sheet sections Stitching Unit • Wire size: No. 24–26 • 9 x stitching heads Sectional Folding Unit • 1 x sectional folding unit Square Back Pressing Unit • 1 x square back pressing unit Trimmer • 1 x fore-edge trimming knife • 3 x separating knives • 2 x lateral trimming knives Corner Rounding Device • Corner rounding unit for finished exercise books Book Turning Unit • Book turning station for even stacking Book Stack Discharge • Book stack delivery • Book flipping & title design mixing delivery table (retrofitted) Electrical Equipment • Device for maintaining suitable temperature for electronic components in switch cabinets Pneumatic Equipment • Pneumatic system for machine operation

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Hsdpfxeznz Ezo Aaheu Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Year of construction: 2024, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Hsdpfx Ajz Hax Ueahju No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Hsdjzz Agmopfx Aaheu Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. Hodezmzbmspfx Aahju The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. Hodpszxcn Esfx Aahju The machine has been in use for 10 years. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Year of construction: 2021, operating hours: 300 h, condition: used, functionality: fully functional, machine/vehicle number: I100, Florapower industrial continuous screw-press processing system, manufactured in Germany and commissioned in October 2021. The machine has accumulated less than 300 total operating hours and is in very good, fully operational condition. The system was originally configured for the continuous, solvent-free mechanical processing of dried hemp flowers and the production of hemp/CBD oil. In addition to hemp processing, the Florapower screw-press technology can also be used for the mechanical processing and cold pressing of a broad range of dry oil-bearing seeds and other suitable raw materials. Exact capacity and process parameters depend on the raw material, screw configuration and required final product. The system features: automated raw-material feeding and dosing industrial continuous screw-press technology PLC / touchscreen process control adjustable operating parameters stainless-steel process components continuous mechanical pressing Hjdezz Nvzopfx Aahsu solvent-free processing concept Manufacturer: Florapower GmbH, Germany Year: 2021 Commissioned: October 2021 Operating hours: less than 300 h Condition: very good / fully operational Original machine purchase price: approx. EUR 96,000 excluding installation and transport Total original investment: approx. EUR 110,000 Location: Slovenia, European Union Asking price: EUR 85,000 – negotiable The machine can be inspected and demonstrated under operating conditions by appointment. Detailed photographs, operating videos and additional technical documentation are available for serious buyers. Dismantling, loading and international transport can be agreed separately with the buyer. Reason for sale: change of production focus.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Manufacturer Ryser GmbH Switzerland Type BAFAG ATU 15 Power 2 kW Hedpfevz Svbex Aahsu

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Key technical specifications of the MWM cogeneration plant, according to the documentation: Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Hodpfx Aaezudbfeheu Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. Hodpfx Aaszl Rfxjhsu • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Hsdpfx Aaoztn Sxjhsu Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Ground fault monitoring, adjustable. Hedpjzxwx Ejfx Aahju

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V Hodpfsw Dy Hlsx Aahou - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Hedpfezrh D Sex Aahsu Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. Hjdpfjzw Ukcex Aahou The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: like new (used), functionality: fully functional, empty load weight: 900 kg, maximum load weight: 5,000 kg, overall weight: 6,000 kg, tire size: 300 x 80, tire condition: 100 %, trailer brake: trailer braked, Year of construction: 2025, Water tank trailer, 5000 liters - 25 km/h, with ABE (German type approval) Ideal for municipal services (gardening department), civil engineering, road construction for dust control, construction site supply, agriculture, or as a professional water tank for large companies – anywhere where water is needed on site. Equipped with a mounted wide-spreading nozzle and spray bar with nozzles. Coupling height approx. 700 mm. Hsdozy Dy Eepfx Aahou Automatic support wheel with folding mechanism. PTO pump for filling and emptying. Additional PTO pump for operating a high-pressure cleaner. As-new demonstration unit from 2025. Please send us your realistic offer. VAT can be shown separately.

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing - One or two air hoses are leaking - A test camera is missing Hodpfjzlnb Rox Aahsu - Shipping is possible for an additional charge.