Used Elumatec Sbz 131 for sale (738)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Iaodexy Hcijpfx Aizjw Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Iajdpoy Aafxofx Aizjw

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Iaedpey Ah Tkjfx Aizsw Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Iodpfx Aiox Ecfkozeaw Max. travel Z-axis: 280 mm Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with a new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material clamps Spindle in very good condition, spindle pull-in force: 12.5 kN Iedpfx Aewwukxeizjaw Safety fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Maximum machining length: 3,100 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Iajdpfxsxvp Nkj Aizsw Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Loading is included in the price

Year of construction: 2007, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 9,000 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm. Spindle power: 21 kW Tool changer with 13 standard and 7 special tools minimum quantity spraying Iasdpfx Aisxwydbozsw Clamp detection and automatic shifting 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Loading is included in the price Weight: approx. 8,500 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 6,450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 6,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS X-axis travel: 6,450 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Machining length: 6,500 mm Number of tools: 8 pcs. Tool holder: BT30 Tool change time: 1.2 s Maximum tool diameter: 80 mm Spindle speed: 6,000 rpm Feed rate X: 34 m/min Iaedpfx Aisyg D A Iezsw Feed rate Y+Z: 18 m/min MACHINE DETAILS Total power requirement: 8.5 kW Dimensions & Weight Dimensions: 9,800 x 3,000 x 2,400/3,300 mm Weight: 5,400 kg

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS X-axis travel: 9,500 mm Y-axis travel: 1,000 mm Z-axis travel: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc milling cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with misting EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, notching, and sawing with stationary profile bar 6-sided machining: front optional, underside possible Profile protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis CNC control for complex 3D machining Display: 15-inch colour monitor Iedpfeycul Sex Aizoaw Interfaces: USB ports, network connection 2-layer machining for pendulum operation Associated tooling (HSK tool holders) Two circular saws for aluminium Note: Documentation for disassembly of the machine is included.

Year of construction: 2016, operating hours: 10,900 h, condition: excellent (used), functionality: fully functional, The machine is in very good condition and fully operational. We don't need it anymore so it is for sale. It is regularly maintained. Dismantling and load on truck are included in price. Some other informations: 4-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 7.600 mm 8 pneumatic clamps Tool magazine with 8 tools capacity Spindle working hours 5100h Isdpfewwtyljx Aizeaw Additional tehnical specifications available on request

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Iaodpfowwtw Djx Aizow Spindle working hours 4100h Additional tehnical specifications available on request

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, swivel angle A-axis (max.): 180 °, TECHNICAL DETAILS Max. machining length without end face processing: 4,200 mm Max. machining length with end face processing: 4,080 mm Travel distances X-axis travel: 4,200 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Traverse speeds X-axis traverse speed: 65 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 60 m/min Swivel range A-axis: 0° - 180° Positioning accuracy X-axis positioning accuracy: ± 0.1 mm Y-axis positioning accuracy: ± 0.1 mm Z-axis positioning accuracy: ± 0.1 mm A-axis positioning accuracy: ± 0.1° Max. spindle speed: 24,000 rpm Iodpfx Aijw Svmiozsaw Spindle rated power: 7 kW S1 Tool holder: HSK-F63 Max. cutter diameter: 80 mm Max. saw blade diameter: 200 mm MACHINE DETAILS Air consumption: approx. 180 l/min Machine weight: 4,200 kg Operating hours Spindle hours: 1,280 h Machine hours: 13,066 h

Year of construction: 2018, condition: used, functionality: fully functional, Information about the machine: The machine comes from a metal construction company specializing in the production of windows, doors, and façades made from aluminum. It was purchased in 2018 to relieve several 5-axis machines, specifically for the manufacturing of aluminum front doors. Due to operational restructuring, this machine was no longer used and was released for sale. The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s facility. All worn parts have been replaced. Part programs can be created either directly at the machine (eluCam) or using the included office software eluCad. Also included is the software option package for data import of ECW, NCW, and V6 files, e.g., from LogiKal or Wictop. Machine description: - Efficient machining of aluminum, plastic, and steel profiles - Continuously positionable A-axis from -120 to +120 degrees - Linear guides for clamp movement - Processing results are improved by intelligent control technology - Rapid positioning of the machining unit with speeds up to 120 m/min thanks to dynamic servo drives - Thread cutting without compensating chuck - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No reference run required for main axes due to absolute encoder systems - Collision avoidance via automatic clamp recognition and positioning - Power torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control. Energy recovery via DC-link coupling of the axis drives with regenerative feedback and braking energy buffering. Green-Line cooling unit for the control cabinet with reduced energy consumption. - Windows operating system - 15" flat screen, USB ports and network connection - Simple and convenient program entry using eluCam at the operating terminal – even during machining - Remote maintenance via TCP/IP with internet access Equipment: - Safety enclosure for operator protection Iaedpfeyr H Abjx Aizow - Four horizontal pneumatic clamping units - Material stop left - Minimum quantity lubrication - Handheld control device - Depth gauge Technical data: - Max. machining length (without face-side machining): 4,050 mm - X-axis travel: 4,176 mm, Vmax. 120 m/min - Y-axis travel: 1,040 mm, Vmax. 60 m/min - Z-axis travel: 540 mm, Vmax. 30 m/min - Machining directions: 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Max. spindle speed: 20,000 rpm - Spindle power: 7 kW, S1 (water-cooled) - Tool holder: HSK-F63 - Automatic tool change - 12 tool positions in automatic magazine - Max. disk cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp movement - Spanner Basic (with round guide) - Software: eluCam - Compressed air supply: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute approx. 185 l with spray Accessories for the machine (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disk cutter - Disk cutter D=92x6.0 mm Z=14 d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circle, for overlength processing - Various used tool holders and cutters - ESTA swarf extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW, and V6 files

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 480 mm Z-axis travel: 325 mm Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Tool holder: BT 30 MACHINE DETAILS Tool changer: 8 positions EQUIPMENT Tools Iodeypbmijpfx Aizsaw

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm Iaedpfx Aexx Uf Njizow MACHINE DETAILS Input voltage: 400 V Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Floppy disk drive DOS operating system

Year of construction: 2005, condition: used, functionality: fully functional, machine/vehicle number: 1223030045, elumatec SBZ 122/30 profile machining centre, 3-axis controlled, machining length 3,850 mm - 2 tool magazines - 2 mitre heads - profile length measurement - 4 pneumatic clamps - automatic clamping adjustment - manual control panel - E550 control unit - spindle with 6 kW power - light curtain safety system Video of the machine in operation available upon request. Isdpfx Aiezgv Hwezeaw

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: 20 048 M100390 130003048, movements x/y/z: gross/klein 6500/300 mm spindle turning speed range: 5400 rpm number ob tool positions: 8 pieces Ijdpfx Aiez N T Sezjaw carriages: x/y u. z 60/30 mm/miin spindle drive: max. 5,5 kW The machine is sold as a spare part carrier because the controller is defective. electrical connection: 400 V kW space needed: 8600 x 2270 x 2150 mm weight: ca. 5000 kg

Year of construction: 2010, operating hours: 11,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12222321222, Equipment: type plate available, Elumatec SBZ122/33 profile machining center, year 2010 Technical data: Iasdpfx Aiew Rv A Uezjw Working area: X - 3850 mm, Y - 350 mm, Z - 280 mm Electrospindle 10 kW - max. 20,000 rpm (overhauled in 2023) (RF-HSK-F63 125/125x430 24/6.5) Tool holder HSK-63 F Tool changer Work table with 4 clamps with automatic positioning Pneumatic clamping operation Photoelectric safety barrier Operator handheld terminal Control panel workstation USB connection Operating software: Windows 7 system Production software: EluSoft, EluCAM Numerical control: Ferrocontrol Protective fencing with doors (laser safety barrier) Automatic and central lubrication of linear guides Weight: 1,940 kg Total connected load: approx. 14 kW Machine dimensions: 4,670 x 2,000 x 2,540 mm Required space: 5,165 x 3,000 x 2,540 mm Machine used for aluminum profile processing. Serviced and ready for operation.

Condition: excellent (used), functionality: fully functional, ELUMATEC SBZ150 Iasdjylbviepfx Aizew 5-axis CNC profile machining center, manufactured in 2004. 5-axis CNC machining center for aluminum and thin-walled steel profiles.

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: - Machine in good overall condition Iaedpfxjyg Ht Ae Aizsw - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system - Control panel - Original covers and safety guards

Year of construction: 2010, condition: used, functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Iaedjw Dzagepfx Aizjw Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2440099798, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, total length: 9,000 mm, total width: 2,400 mm, total height: 2,000 mm, saw blade speed: 2,250 rpm, input voltage: 400 V, overall weight: 3,500 kg, controller manufacturer: ELUMATEC, power: 9.2 kW (12.51 HP), input frequency: 50 Hz, operating pressure: 7 bar, ELUMATEC DG 244/E 580/1 Double miter saw - Rated current: 21.8 A - Cutting length: 6000 mm, min. 375 mm at 90° - Swivel range, base position 90°: swivel up to 67.5° inward, 22.5° and 50° outward (140°) - Tilt range, base position 90°: tilt up to 45° inward - Max. cutting range: 390 x 110 mm - Saw blade speed: 2250 rpm - Software option: Software module for crosscuts and overlength, software interface for window programs - Includes two DG 244 extraction systems for extracting aluminum and plastic chips - Roller conveyor: 1.5 m length, 400 mm width for extraction - Includes industrial PC with 1-axis control E580/1 for the cutting length (X-axis) - Includes a selection of various saw blades Iajdpfx Aozktgvoizew Note: The item must be collected between September 22nd and 24th, 2026, on a date to be agreed upon. FCA D-76227 Karlsruhe - loaded onto a truck.

Year of construction: 2021, condition: good (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, controller manufacturer: ELUMATEC, controller model: SBZ 122-ELUCAM, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 24 A, feed rate X-axis: 120 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.1 mm, spindle speed (max.): 20,000 rpm, tool length: 150 mm, number of slots in tool magazine: 12, ELUMATEC 122/73 CNC bar machining center - Frequency: 50/60 Hz - Max. machining length without end-face machining: 4050 mm - Machining direction (front and back) - Disc cutter diameter: 120 mm - Clamping cylinder displacement, automatic - Tool holder: HSK-F 63 Note: The item must be collected between September 22nd and September 24th, 2026, on a date to be agreed upon. Iaodpfx Aijzktdzszjw FCA D-76227 Karlsruhe - loaded onto a truck.

Condition: used, Year of construction: 2013, We are offering for sale a two-head Elumatec ZS 720/00 LV welding machine, manufactured in 2005, designed for welding PVC profiles for the production of windows, doors, and frames. The two-head configuration allows for the simultaneous welding of two corners of the frame, ensuring precise processing and good productivity. The machine is characterized by its robust Elumatec construction and is suitable for professional use in companies that manufacture PVC window and door frames. Technical specifications: Manufacturer: Elumatec Model: ZS 720/00 LV Year of manufacture: 2005 Type: two-head welding machine Application: welding of PVC profiles Electrical supply: 3/N/PE – 380/400 V Frequency: 50/60 Hz Installed power: 5.2 kW Operating pressure: 7 bar CE marking Made in Germany The machine is used and is available at our location in Termini Imerese, Palermo. Ijdpszmhuaefx Aizjaw It can be viewed by appointment. Additional photographs, technical information, and videos can be provided upon request.

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cutting area at 90°: 195 x 120 mm Iasdpjzi A Uasfx Aizew Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung