Used Ep-Systems Plasma Cutting Machine for sale (88,199)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning Lrodpfxjvpalao Ac Nen system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) Ljdpfxjy E Nxgo Ac Nsrn ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Lrodpfx Acoy E Nykj Nsn Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine Lsdpfxefwmrpe Ac Norn CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications Lrjdpfxeyx Svbe Ac Nen • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Lrjdpfxozdz U Ue Ac Nsn Original new price: 450,000 euros.

Condition: new, Year of construction: 2006, type of input current: three-phase, total height: 800 mm, total width: 520 mm, total length: 800 mm, input voltage: 400 V, Professional Jackle Power Plasma 160A cutting machine for sale. German-made industrial equipment, suitable for a variety of metal cutting applications. Power supply: 400V, three-phase. Cutting current adjustable from 20A to 160A. The machine is in working condition. Lrodpfx Acjy U Izfo Non

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components). Lsdpfx Aew I D Iaec Njrn

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä3626 Availability: May 2026 Lrjdpsyay H Ajfx Ac Nen

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug Lsdpfeyah R Njx Ac Nern - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: Ljdev Hm A Tepfx Ac Njrn -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: used, Year of construction: 2019, functionality: fully functional, Plasma Cutting System Becky Job Master 6.20 with Extraction Table – Year 2019 This plasma cutting system is being sold due to an upgrade to a laser cutting machine. The machine is fully operational and can be inspected and tested under power. Location: Vorarlberg Technical Data Manufacturer / Model: Becky Job Master 6.20 Year of Manufacture: 2019 Working Area: 6,000 × 2,000 mm Z-Axis Travel: 300 mm Max. Cutting Speed: 75 m/min Dimensions: Lrjdpfx Acox U Dqie Nsn Machine Length: 8,000 mm Machine Width: 3,700 mm Overall Height: 2,000 mm Work Table Height: 820 mm All accessories belonging to the system are included, such as: Hypertherm XPR 170 power source Donaldson filtration unit Software etc. Sale excludes disassembly, transport, and installation.

Condition: excellent (used), Year of construction: 2020, operating hours: 860 h, functionality: fully functional, machine/vehicle number: 2426201745, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, table length: 3,000 mm, working width: 2,000 mm, Equipment: documentation/manual, ZINSER 2426 CNC plasma cutting machine with Hypertherm XPR170 VWI Year of manufacture 2020 – Very good condition – including programming software For sale is a well-maintained and little-used CNC plasma cutting machine, type ZINSER 2426, with a Hypertherm XPR170 plasma source. The machine is in very good technical and optical condition and has only been used in our own operations. It is immediately ready for use and can be inspected and demonstrated under power after prior arrangement. Technical data: Manufacturer: ZINSER Type: 2426 Year of manufacture: 2020 Control system: ZINSER CNC 5010 Plasma source: Hypertherm XPR170 with VWI technology Cutting table: 3,000 × 2,000 mm Travel range, longitudinal axis: approx. 4,000 mm Side arm on the right Preparation for the integration of a pipe rotating unit CNC-controlled height control Programming software / nesting software included Special features: The combination of the ZINSER machine and the Hypertherm XPR170 enables precise and economical cutting operations in mild steel, stainless steel, and aluminum. The modern XPR technology ensures excellent cut quality and high process reliability. Ljdpjza Eufefx Ac Norn Another advantage is the existing preparation for a pipe rotating unit, which means that the machine can be easily expanded if required. Scope of supply: ZINSER 2426 CNC plasma cutting machine Hypertherm XPR170 plasma source ZINSER CNC 5010 control system Programming software / nesting software Documentation and manuals Not included in the scope of supply: Extraction system. Location: Austria Inspection and test cut possible after prior arrangement. Disassembly and transport are to be organized by the buyer.

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Ljdpofirx Nefx Ac Nsrn Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: new, Year of construction: 2024, Everything can be configured according to your needs, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) Lrjdpfxsfiqgre Ac Non AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm Manual gas console for Hypertherm Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head CNC angle cutting head (+/- 45) Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in the research and production of machines for sheet metal processing, with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our showroom offers you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services related to training and customer service. We are now happy to support you from Germany – from consulting to purchasing and throughout the entire life cycle of your machine. With our German branch, we are always there for you, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Year of construction: 2024, Everything is configurable upon request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servo motors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screws on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma bevel cutting head, CNC bevel cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end D9hnyc97o With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, who will competently assist you with advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would now like to support you from Germany – from advice to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on site when you need us to be able to react quickly and efficiently. Lsdpfxefirx Tj Ac Norn Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm Ljdedyfwkopfx Ac Norn • Repeatability: ± 0.1 mm • Power (Hypertherm XPR 170 XD Optimix): 170 A • Cutting range: • Unalloyed steel, piercing, argon: 40 mm • Unalloyed steel, piercing, air: 35 mm • Unalloyed steel, contour cutting: 60 mm • Alloyed steel, piercing: 22 mm • Alloyed steel, contour cutting: 38 mm • Aluminum, piercing: 25 mm • Aluminum, contour cutting: 38 mm Standard equipment: • Control system: Durma Aurora CNC controller • Truehole Standard • Sheet metal measurement using laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick modification • Consumable kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: remote maintenance Options include: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with surrounding safety wire • Oxy-fuel torch with sensor • Plasma torch – interruption system • Air dryer

Condition: new, Year of construction: 2021, machine/vehicle number: XPR300-005397, type of input current: three-phase, overall weight: 680 kg, input voltage: 360 V, cutting current: 300 A, ambient temperature (max.): 40 °C, We offer this new Hypertherm XPR300 plasma cutting source, year of manufacture 2021. Only the plasma source is for sale. New, unused. 2 plasma sources available. Forklift on site. Ljdpoy Dqrfefx Ac Njrn Manufacturer: Hypertherm Model: XPR300 Year of manufacture: 2021 Condition: new Category ID: 1448 Type ID: 2170 Type: plasma cutting machine If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Ledpevdqkvjfx Ac Nsrn Type 0408_2240 380 Volt 10/18 A 220 Volt 16/30 A Cutting current 20/40 A Transport dimension : Length 700 mm width 430 mm height 970 mm Weight 90 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Ljdpfx Acjwhk E Ho Nsrn Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2815, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, total width: 3,500 mm, cutting current: 154 A, TECHNICAL DETAILS Working area: 9,000 mm Lrjdpfxoy Tkkye Ac Non Sheet thickness (max.): 100 mm MACHINE DETAILS Overall width: 3,500 mm Overall weight: 1,100 kg Type of input current: Three-phase Input voltage: 400 V Cutting current: 154 A Input frequency: 50 Hz Short-circuit current: 6 kA IP protection rating: 43/20 Power supply: 3L+N+PE AC 400/230 V, 50 Hz

Condition: new, Year of construction: 2024, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. steel cutting thickness: 22 mm Max. stainless steel cutting thickness: 12 mm Supplied with CAD CAM software. DWG and DXF data transfer via USB and network card. CE certification. ISO 9001, GB/T 19001. 120 A generator. Lodpfx Astu E Dujc Norn The operational cost is extremely low – only 5.5 kW and compressed air!

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 35 mm, overall weight: 4,000 kg, total width: 2,000 mm, total length: 6,000 mm, working width: 2,000 mm, travel distance X-axis: 6,000 mm, type of cooling: air, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Used MicroStep oxy-fuel cutting machine (plasma system) SPL 6001.20 P with Kjellberg torch. Used, in working condition. Lsdey T Exrjpfx Ac Nsrn Will be cleaned before delivery. Can be inspected on site. Exhaust system can be purchased separately.

Condition: new, Year of construction: 2025, BAYKAL Plasma Cutting Machine Systems, BPL H: Highly accurate and reliable performance with positioning speeds. Key Advantages of BAYKAL Plasma Cutting Machine Systems; BAYKAL Plasma cutting is comparatively cheap for medium thickness cuts. Lroder En Riopfx Ac Njn High-quality cutting for thicknesses up to fifty millimeters. Maximum thickness of one hundred and fifty millimeters. Plasma cutting can be carried out on all conductive materials, in contrast to flame cutting which is only suitable for ferrous metals. When compared to flame cutting, plasma cutting has a significantly smaller cutting kerf. Plasma cutting is the most effective means of cutting medium thickness stainless steel and aluminum. Faster cutting speed than oxyfuel. CNC plasma cutting machines can offer excellent precision and repeatability. Plasma cutting can be carried out in the water which results in smaller heat-affected zones as well as minimizing noise levels. Plasma cutting can cut more complex shapes as it has high levels of accuracy. Plasma cutting results in minimal dross as the process itself gets rid of excess material, meaning very little finishing is required. Plasma cutting does not lead to warping as the fast speed significantly reduces the heat transfer.

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table Lrjdpfxsy T N R Es Ac Njn - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.