Used Ep-Systems Plasma Cutting Machine for sale (84,610)

Year of construction: 2007, condition: ready for operation (used), - USED - CNC PLASMA CUTTING MACHINE Cgsdpfjyru Rgex Ad Dot WORKING AREA: 6000 x 2000 x 60 mm GENERATOR: HYPERTERM HPR130 CONTROL UNIT: GASPARINI MAX CUTTING SPEED: 0,1 - 30 m/min WEIGHT: 4400 Kg OVERALL DIMENSIONS: 6910 x 3150 x 1581 mm ACCESSORIES: FUME EXHAUSTER NOTE: MACHINE REVISED IN 2026

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Csdpeyzy S Asfx Ad Djgt Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: good (used), Year of construction: 2016, Gebruikte plasmasnijmachines van Soitaab (Italië) Model: Plasmatech 3015 Tafelafmetingen: 3000 x 1500 mm Hypertherm HPR 130 XD plasmabron Markeerstift Torit afzuigsysteem Cjdpfx Aoyu Spljd Djgt Bouwjaar: 2016

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, working range: 3,000 mm, sheet thickness (max.): 40 mm, The information was found successfully. Here is the updated listing with added cutting parameters: Cedjywlh Ujpfx Ad Dsgt Teknohaus Thermcut 3000D – CNC Plasma Cutting Machine For sale: a well-maintained Finnish-made CNC plasma cutting machine. The machine has been used in production and operates flawlessly. Technical specifications: Manufacturer: Suomen Teknohaus Oy Model: Thermcut 3000D Year of manufacture: 2007 Serial number: 320011 Supply voltage: 3 × 400 V Plasma source: Hypertherm HyPerformance HPR130 (130 A) Controller: Thermcut / Teknohaus CNC controller with touchscreen USB interface for program transfer Cutting capacity (mild steel): - High-quality, virtually dross-free cut: 16 mm - Production piercing: 25 mm - Maximum cutting thickness (edge start): 38 mm Features: - Large cutting table (approx. 3000 mm wide) - Two plasma channels (Plasma 1 & Plasma 2) - Water table for spark and fume management - Ideal for cutting steel, stainless steel, and aluminium Machine viewings available by appointment; the machine can be seen in full working order. 📞 For further information, please call.

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Cjdpfex D D N Usx Ad Djgt Application Types Cutting

Condition: used, Year of construction: 2019, functionality: fully functional, Plasma Cutting System Becky Job Master 6.20 with Extraction Table – Year 2019 This plasma cutting system is being sold due to an upgrade to a laser cutting machine. The machine is fully operational and can be inspected and tested under power. Location: Vorarlberg Technical Data Manufacturer / Model: Becky Job Master 6.20 Year of Manufacture: 2019 Working Area: 6,000 × 2,000 mm Z-Axis Travel: 300 mm Max. Cutting Speed: 75 m/min Dimensions: Machine Length: 8,000 mm Machine Width: 3,700 mm Overall Height: 2,000 mm Work Table Height: 820 mm All accessories belonging to the system are included, such as: Hypertherm XPR 170 power source Donaldson filtration unit Software etc. Sale excludes disassembly, transport, and installation. Codpfxsx U Dqij Ad Degt

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 35 mm, track width: 2,000 mm, table length: 6,000 mm, cutting current: 260 A, We offer for sale a used, reliable, fully functional Messer Multitherm eco 3100 plasma cutting machine, year of manufacture: 2013. Manufacturer: Messer Model: Messer Multitherm eco 3100 Year of manufacture: 2013 Condition: ready for use Machine type: plasma cutting machine Available for pickup: 08/2026 Description: Power source: 260 A Table size: 2 x 12 m Cutting up to 35 mm sheet thickness Software: Omniwin 2025 Regularly serviced Pre-prepared for oxy-fuel cutting Test run possible upon agreement Cgsdpfxoyvgdys Ad Djt If you have any questions or need more information, feel free to write us a message or call us.

Condition: used, Year of construction: 2019, Year: 2019 Condition: operational - Still in production, inspection possible Configuration: - Automatic pallet exchange - When a pallet is completed, the system automatically ejects it to the side output and feeds a new pallet from the infeed track - Automatic sheet feeding and counting - Automatic jogging and aeration - Automatic air removal from the pile - Automatic feeding into the airboard loader - Automatic loading of airboards - Automatic unloading of the pile onto a pallet, including airboards Basic functions of the BASA system: - Automatically loads materials from a pallet - The transport system allows sequential loading from 2 pallets arranged in line; the empty pallet is automatically ejected - Counts / deducts the exact number of sheets - Jogs, aligns, aerates, and presses the piles - Places jogged piles onto separator cardboard Cedpfoyv Eppox Ad Dsgt - Subsequently separates piles using an airboard - Unloads piles onto a pallet - The BASA system only requires an operator to input or select a job in the system and to supply full pallets and remove empty ones - In off-line mode, the system can “feed” 2–3 cutting machines depending on the material used and pallet loading quality Technical specifications: - Max. format: 770 × 1070 mm - Min. format: 700 × 650 mm - Sheet counter: GTS

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, working range: 9,000 mm, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, input voltage: 400 V, total width: 3,500 mm, cutting current: 154 A, input frequency: 50 Hz, We are offering this used MicroStep 9001.35P plasma cutting machine, year 2020. Csdjyu Hkwjpfx Ad Degt Type: MasterCut Model: 9001.35P Serial No.: 2815 Year of Manufacture: 2020 Rated Current: 154 A Short-Circuit Current: 6 kA Weight: 1,100 kg IP Protection: 43/20 Power Supply: 3L+N+PE AC 400/230V, 50Hz If you have any further questions or require more information, please send us a message or give us a call.

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 Csdpfx Asv Hm A Tjd Dsgt - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20 40 27.07 / 207 - 090, type of input current: three-phase, Plasma cutting machine OMNICUT 4000 Control unit MS 100 Air extraction system Cjdsyr Iguopfx Ad Degt Specifications: Rail length: 15 m Table length: 12.5 m Rail span: 4 m Table width: 2.6 m Plasma cutting unit HPR 130 Cutting thicknesses: Steel: 0.5 mm – 25 mm Stainless steel: 1 mm – 20 mm Aluminium: 1 mm – 20 mm Oxy-fuel cutting unit MSX 750, PCS 2100 Steel: 3 mm – 300 mm The machine has seen little use and is offered in full working condition, ready for operation.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 176063, table length: 4,000 mm, table width: 2,000 mm, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cgsdpfx Ajvfmiwed Djt Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Csdpjdzqccjfx Ad Djgt Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Cgedjdzqa Hjpfx Ad Det Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 240 h, control type: CNC control, controller manufacturer: Hypertherm, controller model: Edge Connect TC, sheet thickness steel (max.): 40 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 5,000 kg, warranty duration: 12 months, Used Esprit Automation CNC Plasma – High Definition XPR170 Cgjdsyzuw Tepfx Ad Djt This Esprit Automation CNC plasma cutting system is presented in exceptional, near-new condition with less than 300 operating hours. Built for precision and reliability, this machine is equipped with a Hypertherm XPR170 high-definition plasma system, delivering superior cut quality and performance across a wide range of materials. Key Specifications: Cutting Area: 3000 x 1500 mm Plasma Source: Hypertherm XPR170 (High Definition) Gas System: VWI Gas Module Included Piercing Capacity: Up to 40 mm Mild Steel Operating Hours: < 300 hours Condition: The machine is in pristine condition, having seen minimal use in a controlled environment. Fully maintained and ready for immediate operation. Additional Information: 12-month parts warranty included Ideal for high-precision fabrication, engineering, and production environments Excellent opportunity to acquire a premium CNC plasma system at a fraction of new cost

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 Csdskdnv Tspfx Ad Dogt with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table. Cgedpfx Aev I U Hced Dst

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: EN 60204-1, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, cutting height (max.): 20 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, warranty duration: 12 months, working length: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: electric, We are offering this well-maintained Hugong INTECUT-HT plasma cutting machine / CNC portal cutting system KAI-TEC Smart, including marking function, year of manufacture 2025, as we are upgrading to a larger system. The machine was only purchased for a single project and has been in operation since August 2025. The manufacturer’s warranty is valid until August 2026. The system is fully functional, in excellent technical condition, and shows no signs of excessive wear. Only normal signs of use are present. It has become too small for our requirements, but it is ideally suited for smaller metal workshops, metal construction companies, or fabrication shops. Technical data & features: - CNC portal cutting system KAI-TEC Smart - Cutting area: approx. 1,500 × 3,000 mm - CNC control with cutting database - NEOCUT 105 plasma system with marking function - Plasma cutting range: 1–20 mm mild steel (stainless steel & aluminium max. 10 mm) - Machine torch including hose package - Automatic torch height control - Laser pointer - FastCam7 nesting software - DXF / DWG import - Auto-nesting function - Remnant sheet nesting - Cut cost calculation Accessories: ✅ Spare and consumable parts included (e.g. nozzles, electrodes and other accessories – ready for immediate use) Other: - Sale due to new installation - Viewing and test run possible by arrangement - Collection by buyer - Price plus VAT Cgsdpfx Adjyux Hqo Det Legal notice: The sale is made with exclusion of liability for material defects. No warranty, no guarantee, no returns. If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Type 0408_2240 380 Volt 10/18 A 220 Volt 16/30 A Cgedsvdqkvopfx Ad Djt Cutting current 20/40 A Transport dimension : Length 700 mm width 430 mm height 970 mm Weight 90 kg

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Cedpfx Aex Hbkqed Dogt Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg Cgedpfx Adoyi Ub Ho Dot

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 3,500 mm, working length: 8,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working length: 8,000 mm Working width: 3,500 mm MACHINE DETAILS Power: 300 A Plasma source: Nertajet Codpfxjyv Awke Ad Dogt EQUIPMENT 1 torch head 1 plasma head 1 oxy-fuel head

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 1,500 kg, input voltage: 380 V, We hereby offer for sale a used plasma cutting machine Model: UP-1530 Cjdpfx Adsyv H Ero Degt Brand: Plasmabron Huayuan 200 Amp, with Hypertherm torch The Z-axis is equipped with height control Cutting thickness up to a maximum of 30 mm steel. (Equivalent to Max Pro 200) Control: Starfire F2300 Controller. Guidance: HIWIN linear guideways. The machine has been dismantled and is in working condition.

Condition: good (used), Year of construction: 2010, Offer 25375 Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm - Controller: BACH - Track gauge: approx. 1900 mm - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 - Weight: approx. 4 t Codexnivzjpfx Ad Degt - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m

Condition: as good as new (ex-display), The Plasma-Jet AirPro Compact 1530 Maxpro is a state-of-the-art plasma cutting machine designed for the Plasma Cutting Machines category, offering exceptional performance within the compact product group. Built for efficiency and reliability, this system features a one-piece design that ensures easy transport and rapid setup, ideal for custom and small-series manufacturing environments. With a cutting length of 3,050 mm and a width of 1,550 mm, the machine can handle substantial cutting tasks while minimizing operating costs. It comes configured with high-performance features such as a powerful MAXPRO 200 plasma source, an intuitive PULSER 3 CNC unit, and professional ProNest LT nesting software. The machine utilizes EtherCAT technology for optimal CNC performance, while the robust linear guides provide accurate, long-lasting operation. In addition, a built-in collision guard protects against damage, and a magnetic coupling allows for quick maintenance. Invest in your workshop's capabilities today by requesting a quote for the Plasma-Jet AirPro Compact 1530 Maxpro – a precise solution in the Plasma Cutting Machines product group. Cjdpfx Adoyg Dg Ts Djgt