Used Erema Sw 8/134 Rtf for sale (36,422)

Condition: ready for operation (used), Stöber FDS5055/L Posidrive servo drive HW 11 SW 5.3C, serial number: 8702144, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Crjdpfx Aex Eu Srja Nob

Condition: ready for operation (used), Trumpf 1255448 Industrial PC / Industrie PC SW V4.2 HW Index A3 SN: 2918, used, in good condition, 100% fully functional, delivery as shown in photos Credpfx Aasx Eu T Ne Neb

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Feeding clumpy soil into a screen reduces waste and increases throughput. Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Cedpfeyf Atvox Aa Norb Throughput: 50 m³/h Drain line connection required: 2 Series: TSC.134.018

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134, used, year of manufacture 2025. Maintenance-free, screening size 0- mm, mixing blocks M80X welded with armored wire in the wear zones. Application with mixing shafts: - Mixing in lime or binder agents for soil drying, blending with compost, sand, various soils, etc., while simultaneously breaking up soil clods. - Aerating, shredding, tearing, turning biomass, organic waste, and compost while at the same time separating twigs, roots, etc. that cannot be shredded. - Fragmenting brittle stones in construction debris such as pumice, bricks, Poroton, while simultaneously separating chunks above mm in size; larger and hard parts remain in the separator. - Feeding lumpy soil into a screening plant reduces waste and increases throughput. Codpoyf Atpofx Aa Norb Equipped with Lehnhoff MS10 adapter system. Price does not include top plate. On return from rental, the machine is inspected and comes with a 12-month warranty. Suitable for excavators from 12 t Suitable for wheel loaders from 8 t Weight (kg): 1200 Throughput: 50 m³/h Drain line required: 2 Series: TSC.134.015

Year of construction: 2023, condition: used, New: Yes Empty weight: 41 kg Serial number: P21410070W Transport dimensions (LxWxH): 3,4x2,9x4,1 Production country: JP Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information Csdpoxq Uprofx Aa Nsrb Rated current (A): 1000 Poles: 3

Condition: used, mileage: 29,427 km, power: 130 kW (176.75 HP), first registration: 04/1998, fuel type: diesel, empty load weight: 9,125 kg, maximum load weight: 1,075 kg, overall weight: 10,200 kg, tire size: 12.5R20, axle configuration: 4x4, wheelbase: 3,690 mm, next inspection (TÜV): 06/2026, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,400 mm, loading space height: 1,750 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, parking heater, tail-lift, trailer coupling, Vehicle location: Bovenden, service vehicle, double passenger seat, rear window, sun visor, 6-speed switch, ABS (anti-lock braking system), differential lock, rotating beacon, stowage box, leaf suspension, tarpaulin and frame, trailer coupling with air and light, underrun protection, roof hatch, steel tail lift, upright. Wheelbase: 3690 mm. Body: equipment box with roller shutters and flatbed with tarpaulin, fitted with a 1.5t tail lift MBB 1500K/800, loading height approx. 1230mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Cedpfex H Amajx Aa Nsrb

Condition: new, range L-W-H 745 x 525 x 915 mm weight 93,5 kg 7 St. Cedou Imk Dspfx Aa Nsrb Workshop trolley filled with 283 quality tools. Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking, 4 heavy duty wheels 125 x 50 mm. including 2 swivel castors with brakes, 2 keys. Tool trolley is equipped with 283 tool parts, including: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 9 - 22mm and Torx from 8 - E20, 1/2" from 8 - 32mm. 3 sets of ratchet ring wrenches from 8 - 19mm, Ring spanner set from 6 -32mm. Various screwdriver sets, bit sets for socket wrench sets, various Allen keys and much more. See pictures.

Condition: used, Year of construction: 2025, Rhinoceros, the top-quality mini-excavator for a fair price. With a one-year parts warranty! Spare parts in stock. We arrange transport throughout Germany and beyond. Rhinoceros KS10-8 mini excavator with kinkmatic New in 2025 With a 12 hp single-cylinder diesel engine. Total weight 1000 kg. Crodpfx Aexddg Tja Nsb Front joystick controls. Roof and roll bar. Work lights. Net 5500 / gross 6655 Additional bins 500 / gross 605

Condition: used, Year of construction: 2025, Rhinoceros, the top-quality mini-excavator for a fair price. With a one-year parts warranty! Spare parts in stock. We arrange transport throughout Germany and beyond. Rhinoceros KS10-8 mini excavator with kinkmatic New in 2025 With a 12 hp single-cylinder diesel engine. Total weight 1000 kg. Front joystick controls. Roof and roll bar. Work lights. Cjdpfxsxb Rf Rj Aa Nerb Net 5500 / gross 6655 Additional bins 500 / gross 605

Condition: ready for operation (used), Year of construction: 2017, conveyor belt length: 3,100 mm, conveyor belt width: 445 mm, Belt dimensions: 3100 × 445 mm Cedpfxjy Nk Nzo Aa Norb Belt speed: 3.6 m/min

Condition: like new (used), Year of construction: 2021, operating hours: 694 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 660 mm, torque: 979 Nm, controller manufacturer: Heidenhain, controller model: TNC640, spindle speed (max.): 6,000 rpm, operating hours of spindle: 694 h, coolant supply: 20 bar, spindle nose: SK50, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Hartford HCMC 1682 – Heidenhain TNC640, used – Year of manufacture 2021 – low hours! Hartford vertical CNC machining center equipped with Heidenhain TNC640 control, oversized precision flat guides in X, Y, and Z axes, moveable clamping table, and a powerful main spindle with SK50 tool holder. The machine features a closed cooling circuit for the spindle and an automatic two-stage gearbox, spindle speed n = 10–6,000 rpm, max. power Pmax = 38 kW, max. torque Mmax = 979 Nm, a 32-position tool magazine with quick-change arm, and an ergonomically optimized work area enclosure. The enclosure has electronically monitored front sliding doors with inspection windows, as well as loading/unloading access to the tool magazine from the rear. Codsy I Uzropfx Aa Njrb Spindle: SK50, 38 kW, max. 979 Nm / max. 6,000 rpm Air cooling with compressed air nozzle at the spindle nose, cooling via M-function is programmable. Working area: X-axis, longitudinal: 1,600 mm Y-axis, lateral: 820 mm Z-axis, vertical: 660 mm Clamping table size: 1,750 x 820 mm Max. table load: 2,200 kg T-slots: 5 units T-slot spacing: 150 mm T-slot width: 18 mm Tool magazine: 32 positions Tool diameter: Ø 125 mm Max. tool length: 350 mm Max. tool weight: 20 kg Cooling system: Coolant: External coolant supply nozzles installed at the spindle nose (vertical slide). Coolant returns via two transverse and one longitudinal conveyor into the coolant tank. The coolant is pumped from the tank as required (via M-function or switch on the control panel) through the nozzles. Mechanical sieves are provided in the coolant tank for coolant filtration. Optional: For internal coolant supply (ICS), a high-pressure pump with a simple filter system is available. When ICS is activated, coolant is pumped from the tank through the high-pressure pump and filter system. Electronic handwheel Oil skimmer in the cooling system Blow-off and rinse guns Chip conveyor Automatic wireless 3D probe (Renishaw) for workpiece probing Automatic tool breakage control (Renishaw) The machine has only been used for a single job. As that order is no longer present, the machine is surplus to requirements. This is a very robust machine with high spindle performance – ideal for heavy-duty machining operations. The machine can be inspected under power at its current location. Note: The clamping devices shown in the pictures are not part of the delivery! Price: ex works Dismantling, transport, and commissioning can be offered on request!

Condition: good (used), size: 2000x700mm speed: 2m/min Codpfx Aaetxm H Ts Njrb Adjustable height

Condition: good (used), Tape length: 3800mm Band width: 600mm Electrical output: 4 kW belt speed : 80m/min Crodpfx Aajfd N U Re Nob

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE Codpfx Aaeyrh I Eo Njrb • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Condition: excellent (used), For sale: Professional fire pumps PFJ (PFJ Pumpen und Feuerlöschtechnik GmbH, Germany), model TS 8/8 DIN 14410. ⚙️ Technical Specifications: Model: TS 8/8 DIN 14410 Flow rate: 800 l/min Operating pressure: 8 bar Nominal speed: approx. 2725 rpm Year of manufacture: 2 units – 1993, 32 h, 98 h 1 unit – 1997, 164 h Weight: approx. 162 kg Manufacturer: PFJ GmbH Jöhstadt – Made in Germany Cedsyyxiwspfx Aa Norb 🔧 Technical Condition: Pumps are operational, start and run smoothly Normal signs of use (scratches, scuffs – visible in photos) Used equipment, but in good technical condition Complete as shown in the pictures 📦 Included: Petrol pump Control panel Lighting All components shown in the photos 💡 Applications: Fire brigade / Volunteer fire department Water drainage Industrial and construction works Fire protection systems ℹ️ Additional Information: Price is for 1 unit Possible to purchase the complete set Shipping available

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify). Crodpfx Aoywpahoa Njb

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460062, Technical Specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis Description: 3 Linear Axes (X, Y, Z) + 1 Rotational Table Axis (A-axis) with index divider head, equipped with direct angular measuring system, number of revolutions: 50 minˉ¹, accuracy +/- 5" # Maximum Clamping / Part Size: Ø 575 x 830 mm; maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z: 65/75/75 m/min; Positioning Accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1–17,500 rpm # Spindle Interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic Tool Changer: 2 x 32 tool positions, chip-to-chip average time: 2.5 sec # Max. Tool Dimensions: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Specifications: # Voltage: 3x400V / 50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Conveyor: Knoll Type 550 K-1 # Oil Cooling System # High-Pressure Oil Filtration System (max 80 bar): Knoll VRF 450_2350 # Cooling System for Shaft, Guides, and Switchboard # 2 Oil Lubrication Units # Oil Vapor Extraction/Recovery System: IFS Vario E2000 (2,000 m³/h) # Fire Suppression System: Kraft & Bauer # Part Presence Detection: via low-pressure air sensors # In-Process Control: Marposs T25 # Tool Breakage Monitoring and Length Measurement: inductive sensor # Tool Holder Detection in Work Spindle Crodpfx Aaexw Syus Neb Machine Condition: Operational

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m Crjdpfx Asxw R Udoa Nob # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) # Compressed air regulator # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” Cjdpjxxrnbjfx Aa Njrb # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Electrical data: - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Machine dimensions: - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system Cjdpfxsxxrc So Aa Nsrb - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec Codpfxoxxkd Ue Aa Norb # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Machine condition: NOT OPERATIONAL Cjdpfx Ajxw Ukvja Nerb # Magazine chain broken — REQUIRES REPLACEMENT

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460065, Technical specifications: # Machining Workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotational table axis (A) and 2 rotational axes (B) with indexer head Crodoxw Ttijpfx Aa Njb - Direct angular measuring system, maximum rotational speed: 50 min⁻¹, accuracy: +/- 5" # Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum workpiece weight: 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle taper: DIN69893-HSK-A63 (internal coolant supply) # Automatic tool changer: 2x32 tools, chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / max. length 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring device: Heidenhain linear scales # Chip conveyor/extractor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max 80 bar: Knoll 550 K-1 450_2450 (can service 2 machines simultaneously) # Shaft cooling system, guideways, and control cabinet # 2 oil lubrication units # Oil vapor absorption/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire protection: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process control: Marposs T25 # Tool breakage monitoring and length measurement: inductive sensor # Toolholder detection system in working spindle # Documentation: Manuals only (printed) Machine condition: Operational / In working condition.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460043, Technical specifications: # Machining workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis A (rotary table) and 2 rotary axes B (indexing divider head) with direct angular measurement system, max. rotational speed 50 rpm, accuracy ± 5" # Max. clamping/part size: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse speeds: X/Y/Z – 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) Cedpfexwvr Isx Aa Nsrb # Automatic tool changer: 2 x 32 tool positions / chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / length max. 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max. 80 bar: Knoll 550 K-1 450_2450 (can serve two machines simultaneously) # Cooling system for spindle, guideways, and control cabinet # 2 oil lubrication systems # Oil vapor extraction/recovery unit: IFS Vario E2000 (2,000 m³/h) # Fire suppression: Kraft & Bauer # Part presence detection: pneumatic detectors (low pressure) # In-process measurement: Marposs T25 # Tool breakage monitoring and length check: inductive sensor # Tool holder detection in spindle # Documentation: operating manuals only Machine condition: Operational / In production

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) Crjdpfsxwvlnsx Aa Nob # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational